Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
VTSTOP STOP TV This cannot be used if the clock is not set. You can programme your television set to switch on automatically to a chosen programme at a chosen time. Firstly, make sure that the internal clock is set to the correct time. To do so : Press briefly. If the time display is — — : — —, you cannot set the alarm. In this case, or if the time displayed is incorrect, you must first set the clock. Refer to the SETTING THE CLOCK section. If the time displayed is correct, the alarm can be programmed. Press briefly. The menu shown on the right will appear. — — : —— Press briefly to select the line. : +— Program. No. : 02 On Off On Off On Off Pr ess r epeatedly to adjust the hours. Pr ess r epeatedly to adjust the minutes. Adjusting the alarm time automatically activates the alarm function : On is selected. Select the Program. No. line. Choose the pr ogramme you want the set to switch on to. If you wish to cancel the alarm function, select the On line. Select Off to deactivate the alar m function. On Off Program. No. : 01 — — — — + + + + Pr ess briefl y to clear the menu fr om the scr een. Switch the television to Stand-By. The Stand-By light flashes. The television will switch on to the selected channel at the time programmed. The symbol appears on the bottom right of the screen. It will automatically switch off after five minutes if no key is pressed on the remote control or on the television keypad. If the set is switched on before the alarm function is activated, it will not switch to the programme selected for the alarm at the programmed time. It is possible to programme both the automatic switching off (SLEEP TIMER) and switching on (ALARM). In this case, the automatic switching on time must be programmed to take place after the switching off time. ENGLISH -11 MANUAL CHANNEL SETTING MENU MENU MENU MENU 0/AV 6 FUNC. VT FUNC. VTSTOP FUNC. VTSTOP MENU FUNC. VTSTOP Norm : EURO DKK' — +/ PROGRAM. Press briefly to call up the main menu. Press repeatedly to select the Program.line. While the television is in any AV mode, (audio- visual), PROGRAM. menu cannot be displayed. PREF. — — : — — Program. Organis. + MENU CH X X Press briefly to display the CC PROGRAM. menu. The first line is selected. Program. No. : X X Name : ——— — 1. SELECTING THE BROADCASTING STANDARD Press repeatedly to select : EURO Western Europe, Tunisia, Morocco (B, G) DKK’ Eastern Europe, Middle East, Africa, French territories (D, K, K’) 2. CHANNEL SEARCH A If you do not know the channel numbers Select the line. Start the search by pressing : —: backward channel search. +: Forward channel search. The cursor will move and the channel numbers are displayed on the CH line when received via the aerial or on the CC line for cable network. Once a station has been received, the picture appears on the screen. If the picture, corresponds to the station required, go to the line, otherwise continue the search. A If you already know the channel numbers Select the CH line for TV channels (aerial) or CC for cable networks. Enter the channel number (it must have 2 digits). e.g. : channel 6, enter 0 and then 6. 3. FINE TUNING (OPTIONAL) Fine tune can be used to remove Norm : EURO DKK' PROGRAM. ENGLISH interference if necessary. CH X X CC Press briefly to select the line. — +/ Program. No. : X X Press +or— to change the picture as necessary. Name : ——— — - 12 Press briefly to select the Program. No.line. Enter an unused programme number using the remote control. CH X X CC Name : — — — — Memo 5. CHANNEL NAME PROGRAM. MENU FUNC. VT PROG. PROG. FUNC. VTSTOP TV MENU FUNC. VT FUNC. VT MENU If you have a decoder to receive a scrambled channel, the TV set goes into AV when this channel is being received. In this case, disconnect the SCART socket from your decoder and call up the PROGRAM. menu. Select the line (Fine Tuning), reconnect the SCART socket and adjust the fine tuning if necessary. 4. PROGRAMME NUMBER PROGRAM. — +/Program. No. : X X Press briefly to move to the Nameline. CH X X CC Press briefly. The first dash flashes. Program. No. : X X Hold down (PROG +) : the characters are Name : displayed in ascending order. Memo Hold down (PROG —): the characters are displayed in descending order. When the character you are looking for is displayed, move on to the next ( + ), or preceding dash ( —). To insert a space, use the empty character (between . and A). 6. STORING IN MEMORY PROGRAM. Press briefly to select the Memoline. CH X X CC Press briefly. The + turns to OK. The channel is Program. No. : X X stored in memory. One second later, the Name : — — — — line is selected again. Search for and store all channels for the same standard. Start again for a different standard from SELECTING THE BROADCASTING STANDARD. Press briefly to remove the menu from the screen. Memo — +/ CHILD LOCK You can prevent the use of your television set without the remote control. The TV set is child locked : -After the sleep timer function. -After switching off the TV set by holding down ...