Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Please check carefully to make sure there are no miss- ing or defective parts. Never use defective parts. Improper assembly may cause damage or injury. If you do not understand these directions, or have any questions about this assembly please contact Sanus at 800.359.5520 or We can quickly assist you with installation questions and missing or damaged parts. Supplied Parts: (1) Television Turntable Supplied Parts: (1) Self Adhesive Protective Feet (pad of 4) Diagram 1Step 1: Position the Turntable so the black nylon swivel is facing up. Locate the circles at the end of each spoke. Next, place a Adhesive Foot inside each circle, as shown in Diagram 1. NOTE: If you are going to use the optional TV-VCR Kit, Proceed to the instructions for those at the bottom of the page, otherwise, proceed to Step 2. Step 2: Flip the Turntable over and place it in the desired position on a shelf or cabinet so the Adhesive Feet are facing down and are in direct contact with the shelf or cabinet as shown in Diagram 2. Assembly Instructions for Optional TV-VCR Kit* *TV-VCR Kit will not work with the TV13 Turntable CircleDiagram 1Diagram 1 CircleCircleCircle AdhesiveAdhesiveAdhesiveAdhesive Foot Bottom ofFoot Bottom ofFoot Bottom ofFoot Bottom ofFoot Bottom ofFoot Bottom of TurntableTurntableTurntableTurntableTurntableTurntableTurntableTurntableTurntableTurntableDiagram 2 Top of TurntableAdhesive Foot Bottom of TurntableTurntableTurntable Top of Turntable Contents: (1) Base Contents: (2) Support Pillars s: (4) Plastic Dowels Contents: (4) Allen bolts Contents: (1) Allen Wrench Sanus Systems 2221 Highway 36 W. St. Paul, MN 55113 800.359.5520 7.6.04 TVTurntable (sold separate) SupportPillar SupportPillar SupportPillar SupportPillar SupportPillar SupportPillar SupportPillar SupportPillar SupportPillar SupportPillar Support PillarPillarPillarPillarPillarPillarPillarPillarPillarPillarPillarPillarPillarPillarPillar BaseBaseBaseBaseBaseBaseTV Turntable (sold separate) Pillar SupportPillar SupportPillar Support Base Assembly Instructions for Television TurntablesTM TV13, TV20, TV27, TV32 Congratulations on your purchase! Sanus Systems Television TurntablesTM are functional, attractive, and inexpensive. They are finished with a black powder that is both durable and beautiful. Please check carefully to make sure there are no miss- ing or defective parts. Never use defective parts. Improper assembly may cause damage or injury. If you do not understand these directions, or have any questions about this assembly please contact Sanus at 800.359.5520 or We can quickly assist you with installation questions and missing or damaged parts. Supplied Parts: (1) Television Turntable Supplied Parts: (1) Self Adhesive Protective Feet (pad of 4) Diagram 1Step 1: Position the Turntable so the black nylon swivel is facing up. Locate the circles at the end of each spoke. Next, place a Adhesive Foot inside each circle, as shown in Diagram 1. NOTE: If you ...
Эта инструкция также подходит к моделям:Телевизоры - TELEVISION TURNTABLES TV-VCR (488.84 kb)
Телевизоры - TELEVISION TURNTABLES TV20 (488.84 kb)
Телевизоры - TELEVISION TURNTABLES TV27 (488.84 kb)
Телевизоры - TELEVISION TURNTABLES TV32 (488.84 kb)