Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Press ADJ or ENTER to start up the Main menu. (menu 9-1) 2. Push the cursor key ^ or v to select Installation. 3. Press ENTER to select. The Installation menu will be displayed. (menu 9-2) Main Menu Image settings Advanced settings Installation Service 1. PC 2. RGB/Component 3. DVI 4. SVideo * 5. Video 6. Component Shutdown Back Menu9-1 Input Slots Installation Input slots File service Internal pattern When no signal Source transition OSD configuration Language V-Keystone H-Keystone Global keystone Orientations Back Menu9-2 Overview • 5 RCA input selection (RGB/component input) • Reset a single input • Reset all inputs 9.3.1 5 RCA input selection (RGB/component input) What can be done ? The 5 RCA input can accept RGB signals as well as Component signals. Therefor, this input must be configured for the correct signal input. How to configure ? 1. Push the cursor key ^ or v to highlight Input slots. (menu 9-3) 2. Press ENTER to select. The input slots menu will be displayed. (menu 9-4) 3. Push the cursor key ^ or v to highlight the 5 RCA selection. 4. Press ENTER to toggle between RGB, YUV or SCART. RGB Input is configured to accept RGB signals. YUV Input is configured to accept component signals SCART Input is configured to accept RGB signals with Video as sync on the Hs input. Installation Input slots Input slots 5 RCA File service YUV Internal pattern Reset single slot When no signal PC Source transition RGB/Component OSD configuration DVI Language SVideo V-Keystone Video H-Keystone Component Global keystone Reset all slots Orientations All input slots Back Back Menu9-3 Menu9-4 R5976763 CINEVERSUM60/70 22042004 9.Installationmenu 9.3.2 Reset a single input What can be done ? Via Image settings and Advanced settings the image can be modified as desired. But when some misalignments are discovered, it sometimes not so easy to return to the standard settings. Therefore, with a Reset a single input,itispossibletoreturntosource factory defaults. How to reset a single input ? 1. Push the cursor key ^ or v to highlight Input slots. (menu 9-5) 2. Press ENTER to select. The input slots menu will be displayed. (menu 9-6) 3. Push the cursor key ^ or v to highlight the input slot which must be reset. (e.g. Video) 4. Press ENTER to select. The specific reset menu will be displayed. (menu 9-7) 5. Push the cursor key ^ or v to select the corresponding source type. (e.g. PAL source). 6. Press ENTER to reset. If the selected source corresponds with the input signal, the projector will load the source default. If the selected source does not correspond, nothing will happen. Installation Input slots Video slots defaults 5 RCA Input slots Reset PAL File service YUV Reset SECAM Internal pattern Reset single slot Reset NTSC When no signal PC Reset PAL non intl Source transition RGB/Component Reset NTSC non intl OSD configuration DVI Language SVideo Back V-Keystone Video H-Keystone Component Global keystone Reset all slots Orientations All input slots Back Back Menu 9-7 Menu9-5 Menu9-6 The reset be executed without confirmation warning. 9.3.3 Reset all inputs What can be done ? All settings of all inputs can be reset to the default values. How to reset all inputs ? 1. Push the cursor key ^ or v to highlight Input slots. (menu 9-8) 2. Press ENTER to select. The input slots menu will be displayed. (menu 9-9) 3. Push the cursor key ^ or v to highlight All input slots. All input will be reset to the default values. Installation Input slots Input slots 5 RCA File service YUV Internal pattern Reset single slot When no signal PC Source transition RGB/Component OSD configuration DVI Language SVideo V-Keystone Video H-Keystone Component Global keystone Reset all slots All input slots Orientations Back Back Menu9-8 Menu9-9 R5976763 CINEVERSUM 60/70 22042004 9.Installationmenu The reset be executed without confirmation warning. 9.4 File service Overview • Auto search • Film mode • Color Space 9.4.1 Auto search What can be done ? When a not active input is selected, the projector can scan automatically the inputs and display the first active source. When auto search is off, the projector stays on the selected source and waits until a signal is available. During the scanning the projector follows priority : 1. PC 2. DVI 3. Video 4. S-Video 5. 5RCA 6. 3RCA How toset up ? 1. Push the cursor key ^ or v to highlight File service. (menu 9-10) 2. Press ENTER to select. The File service menu will be displayed. (menu 9-11) 3. Push the cursor key ^ or v to highlight Auto search. 4. Press ENTER to toggle between ON and OFF. ON Projector scans for an active source OFF Projector stays on the selected input Installation Input slots File service Internal pattern When no signal Source transition OSD configuration Language V-Keystone H-Keystone Global keystone Orientations Back Menu9-10 File service Auto search Film mode Color space ON ON Back Menu9-11 9.4.2 Film mode What can be done ? Some sources like common DVD material are derived from cinema 24 Hz sourc...
Эта инструкция также подходит к моделям:Телевизоры - 70 (2.13 mb)