Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
• Melrose Park, IL 60160 • (800) 729-0307 or (708) 865-8870 • Fax: (708) 865-2941 • Features: • Fits 23" to 84" flat panel screens • Easily expandable adapter brackets and wall plate • Adjustable tilt of +15°/-5° for viewing flexibility • Intuitive design for easy installation • Security hardware for theft resistance and safety Max UL Load Capacity 250lb (113.5kg) Installation and Assembly: OneMount™ This product is UL Listed. It must be installed by a qualified professional installer. Note: Read entire instruction sheet before you start installation and assembly. Note: Read entire instruction sheet before you start installation and assembly. • Do not begin to install your Peerless product until you have read and understood the instructions and warnings contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please call Peerless customer care at 1-800-729-0307. • This product should only be installed by someone of good mechanical aptitude, has experience with basic building construction, and fully understands these instructions. • Make sure that the supporting surface will safely support the combined load of the equipment and all attached hardware and components. • Never exceed the Maximum UL Load Capacity. See page one. • If mounting to wood wall studs, make sure that mounting screws are anchored into the center of the studs. Use of an "edge to edge" stud finder is highly recommended. • Always use an assistant or mechanical lifting equipment to safely lift and position equipment. • Tighten screws firmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding power. Tools Needed for Assembly • stud finder ("edge to edge" stud finder is recommended) • phillips screwdriver • drill • 1/4" bit for concrete and cinder block wall • 5/32" bit for wood stud wall • level • 7/16" socket or crescent wrench • tape measure Accessories: • ACC927, ACC927-S Table of Contents Parts List .............................................................................................................................................................................. 3 Adjusting Tilt Brackets .......................................................................................................................................................... 4 Attaching Tilt Brackets to Screen using Baffled Fastener Pack ............................................................................................ 5 Installation to Double Wood Stud Wall .................................................................................................................................. 8 Installation to Triple Wood Stud Wall .................................................................................................................................... 9 Installation to Solid Concrete or Cinder Block ..................................................................................................................... 10 Mounting and Removal of Flat Panel Screen....................................................................................................................... 11 For customer care call (800) 729-0307 or (708) 865-8870. 2 of 33 ISSUED: 09-20-06 SHEET #: 202-9167-3 01-26-07 3 of 33 ISSUED: 09-20-06 SHEET #: 202-9167-3 01-26-07 Parts may appear slightly different than illustrated. HH Parts List Black Silver Description Qty. Part # Part# AA wall plate 1 201-1210 201-4210 BB left tilt bracket 1 201-0181 201-0192 CC right tilt bracket 1 201-0177 201-0193 DD #14 x 2.5 wood screw 6 5S1-015-C03 5S1-015-C03 EE Alligator® anchor 6 590-0097 590-0097 F F 1/4" serrated flanged locknut 4 530-1021 530-1021 GGwing bracket 2 201-1134 201-4134 HH M5 x 30 mm security screw 2 520-1112 520-1112 II wrench 1 560-1146 560-1146 Before you begin, make sure all parts shown are included with your product. Parts may appear slightly different than illustrated. DD AA BB CC bottom extension bracket top extension bracket M4 x 12 mm (6) (504-9013) Adapter Bracket Fasteners M4 x 25 mm (4) (504-1015) M5 x 12 mm (4) (520-1027) M5 x 25 mm (4) (520-9543) M6 x 12 mm (4) (520-1128) M6 x 25 mm (4) (520-1208) M6 x 20 mm (4) (520-9402) GG Security Option NOTE: Replace safety screw in each tilt bracket with M5 x 30 security screw (HH) using wrench (II). EE II I.D. 5.6 mm (4) (540-1057) I.D. 8.7 mm (4) (540-1059) multi-washer (6) (580-1036) M6 x 30 mm (4) (510-9109) FF M8 x 40 mm (4) (520-1136) M8 x 25 mm (4) (520-1031) M8 x 16 mm (6) (520-9257) Adjustment of Extension Bracket s Loosen four 1/4-20 x 1/4" screws on each adapter bracket (BB,CC). Position extension brackets, with slots facing downward, onto adapter brackets (BB,CC) at the appropriate position to accommodate your screen as shown in Figure 1.1. Securely tighten all 1/4-20 x 1/4" screws as shown in figure 1.2. NOTE: In all bracket extension positions, stops and 1/4-20 x 1/4" screws must be engaged in slo...
Эта инструкция также подходит к моделям:Телевизоры - OneMount RTONE (1.58 mb)
Телевизоры - OneMount RTONES (1.58 mb)