Войти:
Оценок - 3, средний балл: 4.3 ( )

Инструкция по эксплуатации Insignia, модель User Guide

Производитель: Insignia
Размер: 18.37 mb
Название файла: 16d3099e-438f-27f4-31e6-857d93b04fb5.pdf
Язык инструкции:enes
Перейти к скачиванию



Фрагмент инструкции


Press to search forward on a DVD or CD. 15 (Skipreverse) (Skipforward) Press to skip to the previous chapter or track. Press to skip to the next chapter or track. 16 STOP Press to stop DVD or CD playback. 17 DVD TITLE Press to open the DVD title menu. 18 DVD MENU Press to open the DVD menu. 19 REPEAT Press to repeat a section of a DVD or CD. 20 AUDIO Press to change the DVD audio language. 21 (Open) Press to eject the disc from the disc slot. 22 INPUT Press to open the source input menu. 23 ZOOM Press to change the zoom mode. 24 CH / Press to change the channel. 25 RECALL Press to return to the previous channel. 26 FAVORITE Press to display your favorite channels list. 27 DISPLAY Press to display information about the input source. 28 PICTURE Press to change the picture mode. 29 AUDIO Press to change the sound mode. 30 (Play/Pause) Press to play a DVD or CD. Press again topause a DVD or CD. 31 (slow) Press to slow forward or slow reverse a DVD. 32 SETUP Press to open the DVD setup menu. 33 A-B Press to create a playback loop. 34 T.SEARCH Press to locate a point at which to startplayback. 35 RETURN Press to return to the previous menu. 36 SUBTITLE Press to change the DVD subtitle language. Not available on some DVDs. Installing remote control batteries To install the remote control batteries: 1 Remove the battery cover. Insignia NS-LTDVD19-09 19” LCD TV/DVD Combo 2 Insert two AAA batteries into the battery compartment. Make sure that you match the + and – symbols on the batteries with the + and – symbols in the battery compartment. 3 Replace the cover. Notes • Do not mix batteries of different types. • Do not mix old and new batteries. • Remove batteries when the charge is depleted. • Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin, wash immediately. • If the remote control is not going to be used for an extended period of time, remove the batteries. Using the remote control To use the remote control: • Point the remote control directly at your TV, within a 60° angle horizontally (30° to either side), and within 30° vertically of the remote control sensor on the front of your TV and within 26.25 feet (8 m) of your TV. Caution Do not expose the remote control to liquids, direct sunlight, or shock. Do not mix batteries of different types. Notes • Objects between the remote control and the remote control sensor may block the remote control signal. • The range of the remote control may be diminished if direct sunlight or other strong light is shining on the remote control sensor. In this case, change the angle of the lighting, move your TV, or operate the remote control closer to the remote control sensor. 10 Insignia NS-LTDVD19-09 19” LCD TV/DVD Combo Setting up your TV Connecting an antenna, cable TV, or satellite TV To connect an external antenna, cable TV, or satellite TV: 1 Plug the antenna cable (2) from an antenna, cable TV, or satellite receiver (3) to the ANT.INPUT jack on your TV (1). 2 Turn on your TV. 3 Press INPUT, then press / to select TV. Connecting a standard video device To connect a standard video device to the AV jacks: 1 Plug an RCA video cable (2) into a standard video source (5) and into the VIDEO jack on the back of your TV (1). 2 Plug the RCA audio cables (4) into the video device's audio output jack and into the upper AUDIO L and AUDIO R jacks on the back of your TV (1). 3 Turn on your TV. 4 Press INPUT, then press / to select AV. To connect a standard S-Video device to AV jacks: 1 Plug an S-Video cable (3) into the S-Video out jack on an S-Video device (5) and into the S-VIDEO jack on the back of your TV (1). 2 Plug RCA audio cables (4) into the S-Video device audio output jacks and into the AUDIO L and AUDIO R jacks on the back of your TV (1). 3 Turn on your TV. 4 Press INPUT and / to select S-Video. Connecting a component video device To connect a progressive-scan or HDTV video source to Y/Pb/Pr jacks: 1 Plug a component video cable (2) into the progressive-scan or HDTV video device (3) and into the Y/Pb/Pr jacks on the back of your TV (1). 2 Plug the RCA audio cables (4) into the audio out jacks on progressive-scan or HDTV video device and into the lower AUDIO L and AUDIO R jacks on the back of your TV (1). 3 Turn on your TV. VGA INPUT AUDIO Y CB / PB CR / PR COAXIAL R AUDIO L HDMI INPUT INPUT OUTPUT R AUDIO L R AUDIO L VIDEO S-VIDEO ANT. INPUT INPUT FOR SERVICE ONLY AC INPUT ~ 100-240V 50/60Hz VGA INPUT AUDIO Y CB / PB CR / PR COAXIAL R AUDIO L HDMI INPUT INPUT OUTPUT R AUDIO L R AUDIO L VIDEO S-VIDEO ANT. INPUT INPUT FOR SERVICE ONLY 1 2 3 1 AC INPUT ~ 100-240V 50/60Hz 3 4 5 2 1 AC INPUT ~ 100-240V 50/60Hz 3 4 2 11 Insignia NS-LTDVD19-09 19” LCD TV/DVD Combo 4 Press INPUT, then press / to select Component. Connecting a digital audio input You can connect your TV audio out to a digital amplifier. ...


  1. антонина
    + -

    красивый аппарат, но хотелось бы иметь инструкцию на русском языке

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории