Оценок - 6, средний балл: 4
(
)
)
|
Фрагмент инструкции
Assembling a DINRAIL Bracket and Meda Converter 1. Find your media converter model in Figure 1, 2 or 3 on pages 2 and 3 as listed here: Figure 1 • AT-MC101XL • AT-MC102XL • AT-MC103XL and LH • AT-MC104XL • AT-MC1004 • AT-MC1008/GB • AT-MC1008/SP • AT-GS2002/SP • AT-FS232 • AT-FS201 • AT-FS202 Figure 2 • AT-MC605 Figure 3 • AT-PC232/POE • AT-PC2002/POE 4. For the AT-PC232/POE or the AT-PC2002/POE, install the AC power cord and secure it with the retaining clip provided with the media converter as shown in Figure 5, “Securing AC Power Cord with the Retaining Clip”. Figure 5 - Securing AC Power Cord with the Retaining Clip 5. Install the mounting bracket on the DINRAIL. As shown in Figure 6, “Mounting the Bracket on the DINRAIL”, the bracket may be oriented either with the bracket screw above or below the DINRAIL.. Slide the hook towards the DINRAIL until it is snug and then tighten the bracket screw. Figure 6 - Mounting the Bracket on the DINRAIL Copyright © 2009 Allied Telesis, Inc. All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesis, Inc. 1 2 3 4 10 100 SPEED (Mbps) OFF ON AU TO NEG HALF FULL DUPLEX MODE 2 PORT 12 2 100-240VAC~ 1382 1519 DINRAIL Mounting Bracket Installation Guide Overview This guide provides assembly instructions for assembling and mounting a DINRAIL mounting bracket with one of the following Allied Telesis products: • AT-MC101XL, AT-MC102XL, AT-MC103XL and LH, AT-MC104XL, and AT-MC605 Media Converters • AT-MC1004, AT-MC1008/GB, AT-MC1008/SP, and AT-GS2002/SP Media Converters • AT-PC232/POE and AT-PC2002/POE Media Converters • AT-FS201, AT-FS202, AT-FS232, AT-FS232/1, and AT-FS232/2 Media Converters Verifying the Package Contents Make sure that these components are included in your package: • 10 DINRAIL mounting brackets • 20 M3 mounting screws • 10 tie-wraps • This installation guide If any item is missing or damaged, contact your Allied Telesis sales representative for assistance. Assembling a DINRAIL Bracket and Meda Converter 1. Find your media converter model in Figure 1, 2 or 3 on pages 2 and 3 as listed here: Figure 1 • AT-MC101XL • AT-MC102XL • AT-MC103XL and LH • AT-MC104XL • AT-MC1004 • AT-MC1008/GB • AT-MC1008/SP • AT-GS2002/SP • AT-FS232 • AT-FS201 • AT-FS202 Figure 2 • AT-MC605 Figure 3 • AT-PC232/POE • AT-PC2002/POE 4. For the AT-PC232/POE or the AT-PC2002/POE, install the AC power cord and secure it with the retaining clip provided with the media converter as shown in Figure 5, “Securing AC Power Cord with the Retaining Clip”. Figure 5 - Securing AC Power Cord with the Retaining Clip 5. Install the mounting bracket on the DINRAIL. As shown in Figure 6, “Mounting the Bracket on the DINRAIL”, the bracket may be oriented either with the bracket screw above or below the DINRAIL.. Slide the hook towards the DINRAIL until it is snug and then tighten the bracket screw. Figure 6 - Mounting the Bracket on the DINRAIL Copyright © 2009 Allied Telesis, Inc. All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesis, Inc. 1 2 3 4 10 100 SPEED (Mbps) OFF ON AUTO NEG HALF FULL DUPLEX MODE 2 PORT 12 2 100-240VAC~ 1382 1519 PN 613-001150 Rev B Page 2 PN 613-001150 Rev B Page 3 PN 613-001150 Rev B Page 2 PN 613-001150 Rev B Page 3 2. Slide your media converter into the bracket and align the its mounting holes with those on the DINRAIL bracket as shown in the figure for your media converter. Secure the media converter to the bracket using the two M3 mounting screws provided. Figure 1 - Attaching the DINRAIL Bracket to an AT-MC10x, AT-MC1004, AT-MC1008/GB, AT-MC1008/SP, AT-GS2002/SP, AT-FS232, AT-FS201, or AT-FS202 Media Converter Figure 2 - Attaching the DINRAIL Bracket to an AT-MC605 Media Converter LINK TST M/L ON 4 ACT M/L ON PWR CLASS 1 LASER PRODUCT AT-MC104XL SINGLE MODE /MULTI MODE FIBER FAST ETHERNET MEDIA CONVERTER LNK SINGLE MODE MULTI MODE ACT LINK TX RX 100Base-FX TX RX 100Base-FX 1517 VDSL LINE 10Base-T/ 100Base-TX PHONE LNK/ACT 100M PWR LINK RATE NO LIMIT FAST SCBR 6dB RATE LIMIT INTL PROV 9dB AT-MC605 VDSL EXTENDED ETHERNET VDSL CONFIG PROV SCBR 1523 Figure 3 - Attaching the DINRAIL Bracket to an AT-PC232/POE or AT-PC2002/POE Media Converter 3. For all of the media converters except the AT-PC232/ POE and the AT-PC2002/POE, install the DC power cord and secure it to the bracket with a tie-wrap, as shown in Figure 4, “Securing the DC power cord to the DINRAIL bracket”. Figure 4 - Securing the DC power cord to the DINRAIL bracket AUTO MDI/MDI-X LNK FD/ COL PWR AUTO NEG 100M LNK FD/COL PORT 2 100Base-FX TX RX PORT 1 10Base-T/ 100Base-TX MODE ML SML LT AT-FS232 BRIDGING CONVERTER IEEE 802.3/802.3U MULTI MODE CLASS 1 LED PRODUCT 1522 12VDC 1521 Figure 3 - Attaching the DINRAIL Bracket to an AT-PC232/POE or AT-PC2002/POE Media Converter 3. For all of the media converters except the AT-PC232/ POE and the AT-PC2002/POE, install the DC power cord and secure it t...