Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Suitable for normal stereo sound sources such as CDs. Off: Deactivates the matrix decoder. • “Dolby Pro Logic IIx” is fixed to “Off” if the “DTS Neo:6” setting is not “Off.” Note DTS Neo:6 Note DTS Neo:6 Note Treble Adjusts high-frequency audio output. Bass Adjusts low-frequency audio output. Harmonics Equalizer On: Retrieves the tail shape of the waveform which would likely be omitted by audio compression algorithms due to its low amplitude. Off: Deactivates this function. A/V SYNC Corrects out-of-sync audio and video signals by delaying audio output. Audio output can be delayed in 10-millisecond increments, in a range of 0-100 ms. • Some out-of-sync audio and video cannot be corrected with this function, depending on the source signal. Note Type of Headphones Switches to the optimal virtual surround-sound setting for the type of headphones used. Inner Ear: Ideal for headphones worn in your ears, such as the supplied headphones. Overhead: Ideal for headphones worn over or on your ears. • Surround-sound effects may not be produced correctly unless this setting matches the type of headphones used. Note Dual Mono Available only with dual mono audio source signals. Not available for linear PCM source signals. Switches the main or sub audio output for audio source signals other than linear PCM. Main: Both left and right headphone output consists solely of the main audio content. Sub: Both left and right headphone output consists solely of the sub audio content. Main/Sub: Headphone output on one side consists of the main audio content. Output on the other side consists of the sub audio content. Set password A password can be set to restrict use of the system. Cancel password “Set password” is not available when a password has been set. Once a password is specified, it must be entered each time the system is turned on. To cancel password protection, select “Cancel password” and enter the password. “Cancel password” is not available when no Note password has been set. • The system automatically turns off in the following situations. Either turn the system on and enter the password again or cancel password protection. – When the password is entered incorrectly, and you close the displayed setting menu by using the .button – After 90 seconds of inactivity on the password input screen Input Selects the input to the processor unit. The signal input Not available when the to the selected input jack is displayed on the head processor unit is mounted unit. disconnected. HDMI1: Input via the HDMI IN 1 jack HDMI2: Input via the HDMI IN 2 jack HDMI3: Input via the HDMI IN 3 jack HDMI Dynamic Selects the video signal input level. Range Auto: The system automatically detects the input level. Normally set to “Auto.” Full: Select this option when the highlights in the image are blown out or the shadows are blocked. Limited: Select this option when the highlights in the image are dull or the shadows are outstanding. HDMI pass-throug...