Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Multiple Interface Terminals The projector has several interface terminals that can support various types of equipment and signals. Dual Lamp Control System The two-lamp control system offers high brightness, maintained lamp life and energy savings along with redundancy. The lamp control function offers brightness of the lamp can be selected. The power management function also reduces power consumption and maintains lamp life. Simple Computer System Setting The projector has the Multi-scan system to conform to almost all computer output signals quickly. Up to UXGA resolution can be accepted. Security Function The Security function helps you to ensure security of the projector. With the Key lock function, you can lock the operation on the top control. PIN code lock functions prevent unauthorized use of the projector. Multilanguage Menu Display Operation menu is available in 8 languages: English, German, French, Italian, Spanish, Swedish, Chinese, and Japanese. Multi-use Remote Control Use the remote control as wired or wireless. Eight remote control codes are available. 3W + 3W Stereo Speaker Built in 3W x 2 speakers are provided. Helpful Maintenance Functions The lamp and filter maintenance functions provide for better and proper maintenance of the projector. Easy maintenance cover is provided for lamp and color wheel replacement. Network-capable Through an optional Network Manager with serial port in, you can operate and control the projector. Direct Power Off and On Start The Direct Power Off function allows the projector to be turned off (even when projecting an image) using a power strip equipped with a switch and a breaker. The On Start function allows the projector to be turned on by supplied AC power. Note: Before using Direct Power Off, be sure to allow at least 20 minutes immediately after turning on the projector and starting to display an image. Also, the power cord can be removed immediately after turning off the projector. On Start manual may differ slightly from the product. On Start eliminates the need to always use the POWER (ON/STANDBY) button on the remote control or projector cabinet. 2 1. Introduction 3 .. Part Names of the Projector Front-right view ITEM LABEL DESCRIPTION SEE PAGE: 1. IR receiver Receiver for IR signal from remote control 12 2. Lamp cover Remove cover to replace lamp or color wheel 99 3. Lens control panel See Lens Controls 7 4. OSD control panel See OSD Controls and Status LEDS 8 5. I/O connector panel Connect various input devices 10 6. Intake vent Lamp cooling vent – do not obstruct — 7. Speakers Built-in stereo speakers — 8. Height adjuster Adjusts level of projector 6 9. Lens Remove lens cap before use — 10. Lens release button Press the release button before removing the lens — 11. Anti-Theft screw Prevent theft of the lens — 12. Intake vent and front filter Keeps the front fan free of dust – clean regularly for optimum performance – do not obstruct 95 Important: Grill openings on the projector allow for good air circulation, which keeps the projector lamp cool. Do not obstruct any of the grill openings. 1. Introduction Top view ITEM LABEL DESCRIPTION SEE PAGE: 1. Lens control panel See Lens Controls 7 2. Right-hand speaker Right-hand speaker — 3. Lamp cover Remove cover to replace lamp or color wheel 99 4. Exhaust vent Exhaust vent – do not obstruct — 5. OSD control panel See OSD Controls and Status LEDS 8 6. Rear intake vent Rear cooling intake – do not obstruct — 7. Left intake vent Left-hand cooling intake – do not obstruct — 8. Left-hand speaker Left-hand speaker — 4 1. Introduction Carrying the Projector Always carry your projector by the handle. Before moving or carrying the projector, disconnect the power cable and any other cables that may be attached to it. When moving the projector or when the projector is not in use, cover the lens with the lens cap. To extend the projector handle, refer to the following guide. 1. Stand the projector on its end with the control panels at the bottom. 2. Lift the handle in the direction shown until it is fully extended. Note: Stand the projector on its end by lifting the cabinet. Do not use the handle to place the projector upright. 5 1. Introduction Bottom view ITEM LABEL DESCRIPTION SEE PAGES: Height adjusters 1. Intake vent 2. Front filter 3. Ceiling support holes Security chain 4. 5. opening Rear filter 6. Side filter 7. Adjust projection height 38 — Color wheel cooling vent – do not obstruct Keep the fan free of dust – clean regularly for optimum perform 95 ance Contact your dealer for information on mounting the projector on — a ceiling Attach anti-theft device – see .. Using the Physical Lock 54 Keep the fans free of dust – clean regularly for optimum per 95 formance CAUTION With ceiling installation, use approved mounting hardware & M4 screws; maximum depth of screw: 12 mm; distance from ceiling/ wall: 20 cm (0.7 feet) for proper ventilation; distance from fluorescent lamps: at least 1 m (3 feet) front and back o...