Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
OR Connect DVD Player or other equipment’s S-Video Out and Audio Out to the TV S-Video and Audio In Jacks. Remote Control 123RESETINPUTPOWER123 What you will need for connections: AV Cable – 1 OPTIONAL CONNECTION S-Video Cable – 1 Audio Cable – 1 YPB/CB/CRPRCOMPONENT VIDEO OUTAUDIO OUTRLDIGITAL OUTCOAXIALS-VIDEO OUTVIDEO OUTVIDEO OUT SELECTS-VIDEO COMPONENTAUDIO VIDEOINPUT 2RLUHF/VHF/CATV75.PRPBYVIDEOCOMPONENT234R-AUDIO-LR-AUDIO-LVIDEOVIDEOVHF/UHFTO TVFROM ANT. RFCHANNELINOUTINOUTS-VIDEO Rear TV AV Input Jacks Back View of VCR DVD Player Using the S-Video jack overrides the Video (AV2) jack. Press POWER to turn on the TV. Turn on external equipment also. To access Audio Video inputs, press the INPUT key to select VIDEO2. Note: Audio Video Input (AV2) and Component inputs share the same audio (R/L) input jacks. ¦ Make sure all cable connectors are fully seated on jacks. A solid Blue screen with the word VIDEO2 displayed, means that the Video mode is selected, but no signal is ¦ Always match AVcables according to the colors; red for being detected at the Video jacks. Check connections, right audio, white for left audio and yellow for video. turn on external equipment. ¦ Press INPUT key after connecting cables to access the A/V inputs. There is NO need to tune to a blank channel. Need help?Visit our Web site at or Call 1-800-877-5032 USING THE REMOTE CONTROL INSTALL BATTERIES AS SHOWN (2 AAA, not included) Notes: – Do not mix old batteries with new ones or mix different types of batteries together. – Remove the batteries if the remote control will not be used for a month or more. Weak batteries may leak and cause damage. (Normal battery life is roughly six months.) IMPORTANT NOTE: Spent or discharged batteries must be recycled or disposed properly in compliance with all applicable laws. For detailed information, contact your local County Solid Waste Authority. REMOTE CONTROL KEYS Power Key—Press to turn TV ON or OFF. Input Key—Press to select the program source to watch: TV signal or signal from DVD Player or other equipment you have connected to the A/V jacks. Number Keys—Press two keys to select a channel. Example: Press 0 then 6 to select channel 6. For cable channels 100 through 125, press and hold the 1 key until C1–– appears. Then press the other two numbers. Caption Key—(See page 12.) Menu Key—Use this key with the and – + keys to navigate and adjust features of the on-screen menu system. (See pages 10 ~ 12.) Channel Scanning (CH ) and Volume (VOL – +) Keys—Press to scan through the channels in memory and to adjust the volume. ¦ Be sure batteries are installed correctly. ¦ Point the remote control toward the TV. Objects between the remote control may cause misoperation of the remote control function. ¦ Cannot select channel with number keys. Press “0” in front of numbers 1~9. Example: Channel 05. ¦ Adjusting the volume level: Flashing Right arrow indicates volume is increasing and flashing Left arrow indicates volume is decreasing. . Point towards TV . . 1234567890MUTEMENUCAPTIONSLEEPRECALLRESETINPUTPOWERDISPLAY1234567890CHCHVOLVOL . . . (Continued on page 10.) Need help?Visit our Web site at or Call 1-800-877-5032 REMOTE CONTROL KEYS (CONTINUED) 11 12 11 12 Mute Key—Press once to minimize the volume. Press again to restore. V-Guide Key—See pages 13 ~ 14. Reset Key—Press this key twice to restore factory settings. The TV will automatically start Channel Search and clear all customized settings. These features will automatically reset: • Picture Adjustments: Color, Tint, • Caption to OFF Contrast, Bright, Sharpness, • V-Guide to OFF Tone, and Surround • Language to English • Audio to Stereo • Sleep Timer • Aspect Ratio to 4:3 (normal) • Video to TV • Channel Memory If desired, personal settings can be made again using the menu options. Sleep Key—Press this key then press the “0” key to set the Sleep Timer. The desired time can be set from 30 minutes up to 3 hours in 30-minute increments. Sleep Timer will switch off the TV automatically. Note: The Sleep Timer cancels when the TV is turned off or if a power failure occurs. Recall Key—Press to switch between the last two channels you selected. Display Key—Press once to display the channel number. Press twice to display the channel number continuously. Press again to remove the channel number. TV ADJUSTMENT AND SETUP The on-screen menu provides the viewer with easy access to adjustments and settings. Just use the keys on the remote control and follow the on-screen instructions. HOW TO OPERATE THE ON-SCREEN MENU 1. Press MENU key. 2. Use the keys to highlight the desired feature. 3. Use the – + keys to choose desired option. ( indicates selected item.) 4. Press the MENU key to exit. Items with submenus require additional steps. Note: The menu will display on the screen for approximately keys – + keys Audio Stereo Mono SAP Picture/Sound Auto Manual Game Antenna Cable VHF/UHF CH. Search NO Start C...