Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
Pin specification of SCART SOCKET is as follows. PIN Signal Designation Matching Values 1 Audio Out (linked with 3) 0.5Vrms, Imp < 1k.(RF 60% MOD) 2 Audio In (linked with 6) 0.5Vrms, Imp > 10k. 3 Audio Out (linked with 1) 0.5Vrms, Imp < 1k.(RF 60% MOD) 4 Audio Earth 5 Blue Earth 6 Audio In (linked with 2) 0.5Vrms, Imp > 10k. 7 Blue In 0.7Vp-p±10%, Imp 75. 8 Slow (Function) Switching TV:0~2V, Peri:9.5~12V, Imp>10k. 9 Green Earth 10 NC 11 Green In 0.7Vp-p±10%, Imp 75. 12 NC 13 Red Earth 0.7Vp-p±10%, Imp 75 14 NC 15 Red In 0.7Vp-p±10%, Imp 75 16 Rapid Blanking, Switching Logic 0: 0~0.4V, Logic 1: 1~3V, Imp 75. 17 Video Earth 18 Rapid Blanking Earth 19 Video Out 1.0 Vp-p±10%, Imp 75. 20 Video In 1.0 Vp-p±10%, Imp 75. 21 Common Earth 9 Connecting to Various Equipment Connecting to Various Equipment Connecting to Audio System You can enjoy the stereo sound. N O T E • Refer to the owner’s manual of your audio system to connect. • Before you connect the TV/DVD to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. • If you place the TV/DVD near a tuner or radio, the radio broadcast sound might be distorted. In this case, move the TV/DVD away from the tuner and radio. • The output sound of TV/DVD has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. • Turn off the audio system before you connect or disconnect the TV/DVD’s power cord. If you leave the audio system power on, the speakers may be damaged. Do not select “Dolby Digital” as Digital Audio Output of this TV/DVD unless you connect the DIGITAL OUT jack of this TV/DVD to an AV decoder that has the Dolby Digital decoding equipment. High volume sound may damage your hearing as well as the speakers. (Refer to “Selecting Digital Audio Output” on page 49) Warning!! 10 Connecting to Various Equipment Connecting to Various Equipment Connecting to a Camcorder or Other Video Player Connection with SCART Jack (AV1) Connect the SCART jack of your video player (or camcorder) to SCART terminal of TV/DVD with SCART jack. Connection with A/V Jack (AV2) Connect the AUDIO/VIDEO OUT terminal of your video player (or camcorder) to AUDIO/VIDEO IN terminal of TV/DVD with Video/Audio Connecting Cable. 11 Connecting to Various Equipment Connecting to Dolby Digital Amp You can enjoy the high quality dynamic sound of Dolby Digital, Dolby Pro Logic, and 2 Channel Digital Stereo. Dolby Digital? Dolby Digital is the surround sound technology recently used in theatres, and is now available to reproduce this realistic effect at home. You can enjoy motion picture and live concert DVD video discs with this dynamic realistic sound by connecting the TV/DVD to the 6 channel amp equipped with a Dolby Digital decoder or Dolby Digital processor. Amp equipped with Dolby Digital decoder 1 To enjoy Dolby Digital sound from this TV/DVD, you need the following: • DVD recorded in Dolby Digital • 6 channel amp equipped with a Dolby Digital decoder or Dolby Digital processor and power amp • 5 speakers and 1 subwoofer 2 To enjoy Dolby Digital sound You need to select “Dolby Digital” in the SETUP menu. 12 Connecting to Various Equipment N O T E • Refer to the owner’s manual of your audio system to connect. • Before you connect the TV/DVD to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. • The output sound of TV/DVD has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. • Turn off the audio system before you connect or disconnect the TV/DVD’s power cord. If you leave the audio system power on, the speakers may be damaged. Connecting to Various Equipment N O T E • Refer to the owner’s manual of your audio system to connect. • Before you connect the TV/DVD to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. • The output sound of TV/DVD has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. • Turn off the audio system before you connect or disconnect the TV/DVD’s power cord. If you leave the audio system power on, the speakers may be damaged. This product has been manufactured under technical tie-up with Dolby Laboratories. “Dolby” and the “double-D ” symbol are registered trademarks of Dolby Laboratories. Copyright 1992-1997 Dolby Laboratories, Inc. All rights reserved. 13 Watching TV Watching TV 1 1 To turn on the TV, press the [ON/OFF] button in the front part of the set. Now TV set is in STANDBY status. Then, press the power button on the remote control. 2 2 Selecting the Channel. Press the PR [ , ] button or [Number] button to select th...