Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
UHF stations are stored on the remaining program number buttons in order. Example TV/VIDEO SEL A MEMV OFF DSPL 2SEC 7 8 9 1 2 3 4 5 6 10 11 12 SEEKVOL 1 POWER indicator 2 3 Program number buttons EN Program number button 1 2 3 4 5 6 7 8 9 10 11 12 VHF station -2 -4 -6 -8 -10 -12 UHF station 21 -24 -27 -32 -34 -48 - 6 TV/VIDEO SEL A MEMV OFF DSPL 2SEC 7 8 9 1 2 3 4 5 6 10 11 12 SEEKVOL 1 3 3 SEEK button DSPL button 2 POWER indicator TV/VIDEO SEL A MEMV OFF DSPL 2SEC 7 8 9 1 2 3 4 5 6 10 11 12 SEEKVOL 1 3 3 SEEK button DSPL button 2 POWER indicator Watching a TV Programme Note The TV picture does not appear while the car is moving for safety reasons. EN 1 Press (POWER). The POWER indicator lights up. 2 Press the programme number buttons (1 through 12) to select the desired TV station. The TV programme number appears for five seconds in the upper right corner of the display each time you select a station. 3 Adjust the volume dial. Turn the VOL dial on the monitor or press (VOL)on the wireless remote. Note Adjust the volume on the monitor before adjusting the volume on the wireless remote. Turning on the on-screen display Press (DSPL). To turn off the display, press it again. Turning off the TV Press (POWER). If you cannot receive the stored stations while traveling Press (SEEK)momentarily to search for the station automatically. When the unit receives a station, it stops scanning. Press the button repeatedly until the desired station is received. 7 Watching a Video Note The video picture does not appear while the car is moving for safety reasons. You can watch video CDs and cassettes recorded in either the PAL or NTSC colour system. Make sure you have connected a video player to the TV tuner unit correctly. For details, see the Installation/Connections manual. 1 POWER indicator 1 Press (POWER). The POWER indicator lights up. 2 Press (TV/VIDEO)to select the input you connected the video player to, VIDEO 1 or VIDEO 2. Each time you press (TV/VIDEO), the indication changes as follows. TV/VIDEO SEL A MEMV OFF DSPL 2SEC 7 8 9 1 2 3 4 5 6 10 11 12 SEEKVOL EN zTV programme number zVIDEO 1 zVIDEO 2 3 Turn the video player on and begin playback. The unit displays PAL or NTSC colour system video pictures and the following display appears for five seconds. NTSC Video PAL Video VIDEO 1 VIDEO 2 NTSC PAL 8 Listening to the TV/video Sound with the Picture Off (Visual off function) TV/VIDEO SEL A MEMV OFF DSPL 2SEC 7 8 9 1 2 3 4 5 6 10 11 12 SEEKVOL V (visual) OFF button Press (VEOFF)for two seconds. You only hear the sound of the selected programme. To cancel the visual off function, press (VEOFF)again. If you turn the unit off or turn the ignition switch to the OFF position, the visual off function will be cancelled. The visual off function is also canceled when you select another TV programme with the programme number buttons (TV only). EN 9 Adjusting the Picture EN TV/VIDEO SEL A MEMV OFF DSPL 2SEC 7 8 9 1 2 3 4 5 6 10 11 12 SEEKVOL POWER indicator 1 3 2 You can adjust the colour, hue and brightness of the picture. 1 Press (POWER). The POWER indicator lights up. 2 Press (SEL). Each time you press (SEL), the items change as follows. Note You do not need to adjust HUE when watching a TV programme or playing back PAL video sources. When you press (SEL), only COL and BRIGHT appear. 3 Press either SEL(+)or (.)to adjust. Press one of these buttons within five seconds. The item will be cancelled after five seconds if you do not touch the (+)or (.). BRIGHTCOL HUE R G COL (colour) HUE (+) (.) Colour For more colour intensity < For less colour intensity Brightness To brighten the picture < To darken the picture Hue To make the picture greenish < To make the picture reddish BRIGHT (brightness) 10 Tips • To restore the factory settings, press (SEL)for more than two seconds, VISUAL STD (standard) appears. • When the picture is too dark or too bright from the viewing position, press (SEL)to select BRIGHT and press (+)or (.). EN 11 Adjusting the Screen Brightness Depending on the surrounding light, you can adjust the screen brightness by controlling the brightness of the fluorescent pipe installed in the liquid crystal panel. Change the DIMMER selector located on the side of the monitor to HIGH or LOW. To adjust, use BRIGHT dial. Side of the monitor HIGH LOW BRIGHT DIMMER EN HIGH: When the surrounding light is bright (daytime). LOW: When the surrounding light is dark (nighttime). 12 Location of Controls Monitor POWER indicator Wireless remote sensor Wireless remote TV/VIDEO SEL A MEMV OFF DSPL 2SEC 7 8 9 1 2 3 4 5 6 10 11 12 SEEKVOL +/– button SEL (select) button VOL (volume) button V (visual) OFF button (Press for two seconds.) POWER (on/off) switch VOL (volume) dial BRIGHT dial DIMMER (HIGH/LOW) selector Speaker (located on the back of unit) TV/VIDEO button SEEK button DSPL (display) button A MEM (auto memory) button (Press for two seconds.) Programme number buttons EN 13 Additional Information Installing the batteries Two size AA (R6...