Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
When a 4:3 image is displayed on an HDTV, you will see black bars on the sides. The picture quality may not be as sharp as with HD sources. ~ • You can use the Wide Mode function of the TV to adjust the 4:3 image to fit the entire screen (see pages 24, 31 and 32). TV Home Menu: XMB™ (XrossMediaBar) The XMB™ is a menu of BRAVIA features and input sources displayed on the TV screen. The XMB™ is an easy way to select programming and adjust settings on your BRAVIA TV. Press the HOME button on your remote control to access the XMB™. HOME Product Support Clock/Timers Sound Screen Video Options TV Settings Category Object Bar Media Category Bar From the horizontal Media Category Bar you can control: • Settings: timer, picture, sound, screen and other options (see page 28 for customization options). • TV Channels: available channels are displayed on the vertical Category Object Bar. • External Inputs: cable, satellite, VCR, DVD players or other inputs can also be selected from the Category Object Bar for the External Inputs. Getting Started Getting Started 1. Installing the TV Carrying Your TV Carrying the TV requires at least two people. Do not hold by the pedestal or the front panel of the TV. Doing so may cause these parts to break off. Do not grasp the pedestal or the front panel of the TV. When moving the TV, place one hand in the hole on the lower portion of the TV while grasping the top with the other hand, as shown in the illustration below. If you have connected cables and cords, be sure to unplug them before moving the TV. To ensure the safety of children and the TV, keep children away from the TV during installation. Climbing on or pushing the TV or its stand may cause it to fall and may damage the TV. When Installing Your TV against a Wall Keep your TV at least 4 inches (10 cm) away from the wall to provide proper ventilation. Blocking the ventilation opening of the cooling fan may damage the TV. 4 inches TIMER LAMP POWER 12 inches (approx. 30 cm) 4 inches (10 cm) (10 cm) 4 inches (10 cm) Never install the TV as follows: Air circulation is blocked. Air blown into cooling fan. Getting ~ • Do not install the TV near any ventilation, as it may affect the normal TV operating temperature. Recommended Viewing Area Your viewing position may affect the picture quality. For the best picture quality, install your TV within the areas shown below. Model Viewing distance KDF-37H1000 min. 5.9 ft. (approx. 1.8 m) Horizontal Viewing Area 30° 30° Min. XX ft. (approx. XX. XMin. 5.9 ft. (approx. 1.1Min. XX ft. (approx. XXMin. 5.9 ft. (approx. 1.8 m) 65.65. 6565° 65° 65° Min. XX ft. (approx. XX m)Min. 5.9 ft. (approx. 1.8 m) n. 5.9 p 1.8m Min. 5.9 ft. (approx. 1.8 m) Vertical Viewing Area Screen To minimize reflection, the screen surface has a special coating. Inappropriate cleaning methods could damage the screen surface. Special care is required. Cleaning the Screen Surface Dust and dirt on the screen can affect the picture quality. To dust off the screen use a soft cloth. Be sure to follow the cleaning instruction on page 5 for stubborn stains and dirt. Temporary Image Retention When high contrast non-moving images such as station logos and channel numbers are displayed for a long period of time, there may be some image retention on the screen. This is only a temporary condition. Turning off the power for a while or letting the TV run on another channel will eliminate the image retention. Projection Lamp Your TV uses a projection lamp as its light source. As with any lamp, it has a lifespan and needs to be replaced when the Lamp Indicator flashes or the screen becomes darker. Your TV also has a function to display a message, “Projection lamp is nearing end of life. Please replace the lamp.” to let you know that the lamp has reached its expected lifespan. Note the following: s After turning on your TV, it may take a while (one minute or less) before the picture appears. s When the projection lamp wears out, the screen goes dark. Replace the lamp with a new Sony XL-2500 replacement lamp (not supplied). s After lamp is replaced, please set the Lamp Replacement option in the General settings (see page 38). “How to Replace the Lamp”, see page 39. ~ • The light emitted from the lamp is quite bright when your TV is in use. To avoid eye discomfort or injury, do not look into the light housing when the power is on. 2. Locating Inputs and Outputs Left side Y 2 PR PBVIDEOR-AUDIO-L (M ONO)VIDEO/COMPONENT IN (1080i/720p/480p/480i) 1 2 Getting Item Description 1 COMPONENT IN 2 (1080i/720p/ 480p/480i)/YPBPR Connects to your equipment’s component video (YPBPR) and audio (L/R) jacks. Component video provides better picture quality than the composite video connections. (See Video/Component 2 Priority on page 37.) ~ • When connecting to component video (YPBPR) be sure to make the additional connection for the audio signal. Audio cable can be connected to the R-AUDIO-L jack described below 2. 2 VIDEO IN 2 Connects to the composite video an...