Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
DAYLIGHT-SAVING TIME Select this feature and the TV/VCR’s clock automatically will advance one hour in April, then reverse one hour in October. When Daylight-Saving Time is ON, the clock will change automatically as follows: • First Sunday of April : At 2 AM the clock immediately changes to 3 AM. Any timer programming you have set to occur between 2 AM and 3 AM will not record. • Last Sunday of October : At 2 AM the clock immediately changes to 1 AM. Make sure ... • Press the POWER button to turn on the TV/VCR. 1 Select “SETTING CLOCK” – M E N U – Press the MENU button on the TIMER PROGRAMMING PICTURE CONTROL remote control. B SETTING CLOCK CHANNEL SET UP USER’S SET UP Press the PLAY/K or STOP/L but- V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH ton to point to “SETTING INDEX SEARCH CLOCK”. Then, press the F.FWD/B button. 2 Set “D.S.T.” (Daylight-Saving Time) to [ON] Press the PLAY/K or STOP/L but – SETTING CLOCK – ton to point to “D.S.T.”. AUTO CLOCK [ON] AUTO CLOCK CH [AUTO] Then, press the F.FWD/B or REW/s button until [ON] appears. MANUAL CLOCK SET B D.S.T. [ON] 3 Exit the Daylight-Saving Time mode Press the MENU button on the remote control to return to TV mode. TO CANCEL THE DAYLIGHT-SAVING TIME Repeat steps [1] to [2], select [OFF] using the F.FWD/B or REW/s button. - 13-EN 0M05 CLOCK SET UP (AUTO / MANUAL) Set the clock accurately for proper automatic timer recording. If the Public Broadcasting Station (PBS) is available in your area, follow “AUTO CLOCK SETTING”. If it is not, follow “MANUAL CLOCK SETTING”. AUTO CLOCK SETTING You can have the TV/VCR set the clock automatically by using the Public Broadcasting Station (PBS) channel in your area. Once you have set the clock by using the following procedure, the TV/VCR will automatically monitor the correct time and date being broadcast by the PBS station in your area, using a new service called Extended Data Service (XDS). Make sure ... • TV/VCR power must be turned on. • Confirm that the antenna connections are correct. • The cable converter box must be turned on if your TV/VCR is connected directly to it. (See NOTES:) • The channel is properly set in advance. (See page 13.) NOTES: • Auto clock setting only needs to be set once. But it can be done again if the clock’s time has become incorrect for some reason. • If the TV/VCR is connected directly to a cable converter box or satellite box, the local PBS station must be selected on the cable box itself, and the TV/VCR must be set to the output channel of the cable converter box or satellite box (usually channel 3 or 4), to be able to set up or correct the clock automatically. If you do not know what your local PBS station is, then follow “Manual Clock Settings” on page 15. The TV/VCR cannot control the channels of the cable converter box or satellite box. 1 Select “SETTING CLOCK” – M E N U – Press the MENU button on the TIMER PROGRAMMING PICTURE CONTROL remote control. B SETTING CLOCK CHANNEL SET UP USER’S SET UP Press the PLAY/K or STOP/L but- V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ton to point to “SETTING ZERO RETURN TIME SEARCH INDEX SEARCH CLOCK”. Then, press the F.FWD/B button. – SETTING CLOCK – 2 Set “AUTO CLOCK” to [ON] B AUTO CLOCK [ON] Press the F.FWD/B or REW/s AUTO CLOCK CH [AUTO] button repeatedly until [ON] MANUAL CLOCK SET appears. D.S.T. [OFF] 3 Enter the channel number for the PBS station Press the PLAY/K or STOP/L but – SETTING CLOCK – ton to point to “AUTO CLOCK AUTO CLOCK [ON] CH”. AUTO CLOCK CH [AUTO] Then press the F.FWD/B or MANUAL CLOCK SET B D.S.T. [OFF] REW/s button until the channel number for your local PBS station appears. If you do not know the PBS channel number, leave it set to [AUTO] which is located before [2]. The TV/VCR will search automatically all available channels for the local PBS station, and will select that channel. 4 Exit the Auto Clock Setting Press the MENU button on the remote control to return to TV mode. 5 Turn off the TV/VCR Turn the TV/VCR off. Because the Auto Clock functions automatically while the TV/VCR is off. If you choose [AUTO], • the TV/VCR must search until the PBS channel is found. It must scan each channel for a couple of seconds to determine if that channel is transmitting the XDS signal. • if the time, that is automatically set by this selected PBS station is incorrect, it may not be your local PBS station, but one from a different time zone. Or there is a case that no channel is broadcasting the XDS signal in your area, as shown by no time. In these cases, you must manually enter the correct local PBS station, or set the clock manually and turn off the Auto Clock Setting feature. - 14-EN 0M05 MANUAL CLOCK SETTING Make sure ... • TV/VCR power must be turned on. 1 Select “SETTING CLOCK” Press the MENU button on the remote control. B Press the PLAY/K or STOP/L button to point to “SETTING CLOCK”. Then, press the F.FWD/B button. 2 Select “MANUAL CLOCK SET” –SETTING CLOCK – Press the PLAY/K or STOP/L button to...