Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Allow the lamp to cool down completely before removing it. The surface of the lamp remains extremely hot for at least 30 minutes after the power has been turned off. . Do not put flammable materials and metal objects inside the lamp receptacle of the LCD projection TV after removing the lamp. Doing so may cause fire or electrical shock. . To avoid being burned, do not touch the lamp receptacle once the lamp has been removed. . Mount the new lamp securely. Failure to do so may cause a fire or the screen to go dark. . Do not touch the glass of the new lamp with your fingers. . Avoid touching the front glass of a new lamp as this may reduce picture quality or lamp life. The used lamp For customers in the United States: This product contains mercury. Disposal of this product may be regulated if sold in the United States. For disposal or recycling information, please contact your local authorities or the Electronics Industries Alliance (. Do not leave the used lamp near flammable materials or within the reach of children. . Do not pour water onto the used lamp or put any object inside the lamp. Doing so may cause the lamp to burst. Introducing the Sony LCD Projection TV 1 Turn off the power on the main unit. Wait several minutes, then unplug the power cord. (The cooling fan will continue to operate for about two minutes after turning the power off.) 2 Wait at least 30 minutes after unplugging the power cord to allow the lamp to cool down before replacing it. Take the new lamp out of the box. . Don’t shake the lamp. Vibration can damage the lamp or shorten its life. . Avoid touching the front glass of a new lamp or the glass of the lamp receptacle. This may reduce picture quality or lamp life. 3 Remove the Front Panel Cover. POWER/STANDBYPOWERLAMPTIMERSTD/DUO . Hold beneath both sides of the cover, and pull forward to release it. 4 Pull out the lamp. Loosen the screw on the lamp cover with a coin or similar object to remove it, slide the knob to left, and then pull out the lamp cover. Introducing the Sony LCD Projection TV (Continued) 17 Introducing the Sony LCD Projection TV Loosen the screw that holds the lamp, then pull out the lamp. . The lamp is very hot immediately after use. Never touch the front glass of the lamp or the surrounding parts. . After it has cooled, place the used lamp into the empty box of the replacement lamp. Never put the used lamp into a plastic bag while the lamp is hot. 5 Reattach the lamp. Place back the new lamp and tighten the screw. Replace the lamp cover, slide the knob to right till the v/V mark matches, and then tighten the screw. . If the lamp cover screw is inserted incorrectly, the lamp may not operate properly. In such a case, remove the screw, insert it correctly and then tighten the screw completely. . If the lamp cover is not reattached securely, the self-diagnostic function may be triggered and the POWER/STANDBY indicator flashes three times (see page 122). Introducing the Sony LCD Projection TV 6 Reattach the Front Panel Cover securely. POWER/STANDBYPOWERLAMPTIMERSTD/DUOPress firmly. . Consult your Sony dealer for a Sony XL-2200 replacement lamp. . Take great care when replacing the lamp or plugging in/unplugging the connecting cords. Rough handling may cause the LCD projection TV to fall, damaging the TV, the TV stand and/or the floor. Introducing the Sony LCD Projection TV 19 Setting Up the LCD Projection TV Setting Up the LCD Projection TV Overview This chapter includes illustrated instructions for setting up your LCD projection TV. Topic Page(s) LCD Projection TV Front Panel and Connectors 22 Installing the LCD Projection TV 25 Basic Connections: Connecting a Cable or Antenna 28 Connecting Optional Equipment 33 VCR and Cable 35 VCR and Cable Box 36 Two VCRs for Tape Editing 38 Satellite Receiver 39 Satellite Receiver with a VCR 40 DVD Player with Component Video Connectors 42 DVD Player with S VIDEO and Audio Connectors 43 Camcorder 44 Audio Receiver 45 Digital Cable Box 46 Digital Satellite Receiver 47 Digital Satellite Receiver with HDMI Connector 48 Connecting a Device with an Optical IN Connector 50 Using the Control S Feature 51 Using CableCARD 52 Setting Up the LCD Projection TV Channel List 54 Setting Up the LCD Projection TV 21 Setting Up the LCD Projection TV LCD Projection TV Front Panel and Connectors Front Panel POWER/STANDBYPOWERLAMPTIMERSTD/DUO3 3 # TV/VIDEO VOLUME CHANNEL POWER/STANDBYPOWERLAMPTIMERSTD/DUO7 8 9 12 3456 Item Description 1Memory Stick When the Memory Stick indicator is lit, indicates that the indicator Memory Stick is being read. (Do not remove the Memory Stick when the indicator is lit.) 2Memory Stick slot For inserting Memory Stick media to view on your LCD projection TV. For details, See “Inserting and Removing a Memory Stick” on page 78. 3LAMP LED Lights up in red when the lamp for the light source has burned out. For details, see “Replacing the Lamp” on page 16. 4TIMER LED When lit, indicates one of the timers ...
Эта инструкция также подходит к моделям:Телевизоры - GRAND WEGA KDF-60XS955 (14.35 mb)