Оценок - 6, средний балл: 4.2
(
)
)
|
Фрагмент инструкции
• Device Control Keys: If it is set to “Tuning Keys”, you can select a channel tuned by connected equipment and if it is set to “Menu Keys” you can navigate through the menus of the connected equipment using the remote. • Device List Update: Creates or updates the “HDMI Device List”. Up to 11 compatible equipment items can be connected, and up to 5 equipment items can be connected to a single socket. Be sure to update the “HDMI Device List” when you change the connections or settings. 68/83 Set-up • HDMI Device List: Displays a list of connected equipment that is compatible with control for HDMI. Analogue Set-up • Auto Tuning (Only in analogue mode): Tunes in all the available analogue channels. Usually you do not need to do this operation because the channels are already tuned when the TV was first installed. However, this option allows you to repeat the process (e.g., to retune the TV after moving house, or to search for new channels that have been launched by broadcasters). • Manual Programme Preset (Only in analogue mode): Changes the available analogue channel setting. Press to select the programme number you want to modify. Then, press . System Presets programme channels manually. 1 Press to select “System”, then press . 2 Press to select one of the following TV broadcast systems, then press . B/G: For western European countries/regions I: For the United Kingdom D/K: For eastern European countries/regions L: For France 69/83 Set-up • Depending on the country/region selected for “Country”, this option may not be available. Channel 1 Press to select “Channel”, then press . 2 Press to select “S” (for cable channels) or “C” (for terrestrial channels), then press . 3 Tune the channels as follows: If you do not know the channel number (frequency) Press to search for the next available channel. When a channel has been found, the search will stop. To continue searching, press . If you know the channel number (frequency) Press the number buttons to enter the channel number of the broadcast you want or your VCR channel number. 4 Press to jump to “Confirm”, then press . Repeat the procedure above to preset other channels manually. Label Assigns a name of your choice, up to five letters or numbers, to the selected channel. 70/83 Set-up AFT Allows you to fine-tune the selected programme number manually if you feel that a slight tuning adjustment will improve the picture quality. Audio Filter Improves the sound for individual channels in the case of distortion in mono broadcasts. Sometimes a non-standard broadcast signal can cause sound distortion or intermittent sound muting when watching mono programmes. If you do not experience any sound distortion, we recommend that you leave this option set to the factory setting “Off”. • “Audio Filter” is not available when “System” is set to “L”. Skip Skips unused analogue channels when you press PROG +/- to select channels. (You can still select a skipped channel using the number buttons.) Confirm Sav...
Эта инструкция также подходит к моделям:Телевизоры - KDL-32BX300 (9.13 mb)
Телевизоры - KDL-32BX400 (9.13 mb)
Телевизоры - KDL-22EX302 (9.13 mb)
Телевизоры - KDL-26EX301 (9.13 mb)