Оценок - 4, средний балл: 4.5 ( )

Производитель: Sony Размер: 3.62 mb Название файла: Язык инструкции:

Фото и характеристики  Sony  KDL-37BX420

“Screen Format”: Select “Normal” to display in the original image size. Select “Full 1” to enlarge the picture to fill the display area, keeping its original aspect ratio. Select “Full 2” to enlarge the picture to fill the display area. “Reset”: Resets all the “PC Adjustment” except “Screen Format” to the factory settings. “Auto Adjustment”: Automatically adjusts the display position, and phase of the picture in PC mode. “Phase”: Adjusts the screen when a part of a displayed text or image is not clear. “Pitch”: Enlarges or shrinks the screen size horizontally. “Horizontal Shift”: Moves the screen to the left or to the right. “Vertical Shift”: Moves the screen up or down. Channel Set-up Analogue Set-up “Analogue Auto Tuning” (Only in analogue mode): Tunes in all the available analogue channels. Usually you do not need to do this operation because the channels are already tuned when the TV was first installed. However, this option allows you to repeat the process (e.g., to retune the TV after moving house, or to search for new channels that have been launched by broadcasters). “Manual Programme Preset” (Only in analogue mode): Changes the available analogue channel setting. Press to select the programme you want to modify. System Presets programme channels manually. 1 Press F/f to select “System”, then press . 2 Press F/f to select one of the following TV broadcast systems, then press . B/G: For western European countries/regions I: For the United Kingdom D/K: For eastern European countries/regions L: For France ~ • Depending on the country/region selected for “Country”, this option may not be available. Channel 1 Press F/f to select “Channel”, then press . 2 Press F/f to select “S” (for cable channels) or “C” (for terrestrial channels), then press g. 3 Tune the channels as follows: If you do not know the channel number (frequency) Press F/f to search for the next available channel. When a channel has been found, the search will stop. To continue searching, press F/f. If you know the channel number (frequency) Press the number buttons to enter the channel number of the broadcast you want or your VCR channel number. 4 Press to jump to “Confirm”, then press . Repeat the procedure above to preset other channels manually. 30 GB Label Label AFT Allows you to fine-tune the selected programme number manually if you feel that a slight tuning adjustment will improve the picture quality. Audio Filter Improves the sound for individual channels in the case of distortion in mono broadcasts. Sometimes a non-standard broadcast signal can cause sound distortion or intermittent sound muting when watching mono programmes. If you do not experience any sound distortion, we recommend that you leave this option set to the factory setting “Off”. ~ • “Audio Filter” is not available when “System” is set to “L”. Skip Skips unused analogue channels when you press PROG/CH +/- to select channels. (You can still select a skipped channel using the number buttons.) Co...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: