Оценок - 5, средний балл: 3.8
(
)
)
|
К этому устройству также есть другие инструкции:
Телевизоры - KDL-40EX723 (3.43 mb)
Телевизоры - KDL-40EX723 (37.25 mb)
Телевизоры - KDL-40EX723 (14.28 mb)
Телевизоры - KDL-40EX723 (1.18 mb)
Фрагмент инструкции
BFor KDL-26/24/22EX320 B For KDL-26EX321 3 Fix the TV to the Table-Top Stand according to the arrow marks that guide the screw holes using the supplied screws. ~ • If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}. Detaching the Table-Top Stand from the TV To detach the Table-Top Stand from the TV, remove the screws fixed in step 3. ~ • Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the TV. • When removing the Table-Top Stand from the TV, lay the display face down on a stable work surface that is larger than the TV. • To prevent damaging the surface of the LCD display, make sure to place a soft cloth on the work surface. (Continued) 9 GB • • B For KDL-55/46/40/37/32EX72x, KDL-46/40HX72x, KDL-46/40/37/32EX52x, 2: Adjusting the viewing angle of the TV This TV can be adjusted within the angles as illustrated. KDL-46/40/32CX52x, KDL-32EX42x Soft cloth BFor KDL-26/24/22EX320 Soft cloth Soft cloth B For KDL-26EX321 Angle adjustment (Swivel) (except KDL-26/24/22EX320) ~ • When adjusting the angle, hold the stand with one hand to avoid having the stand slip or TV tip over. 20° 20° 20° 20° Angle adjustment (Tilt) (except KDL-46/40/32CX52x) ~ • Be careful not to pinch your fingers between the TV and stand when adjusting the angle. B For KDL-55/46/40/37/32EX72x, KDL-46/40HX72x, KDL-46/40/37/32EX52x, KDL-32EX42x, KDL-26EX321 0° -6° B For KDL-26/24/22EX320 0° - 6° 10 GB ~ ~ Ensure that there are no objects in front of the TV. IR Sensor 3D Sync Transmitter (KDL-55/46/40/37/32EX72x, KDL-46/40HX72x only) Presence Sensor (except KDL-46/40/32EX520, KDL-40/32EX523) • Do not expose the Presence Sensor to direct sunlight or other strong light, as malfunction may occur. 3: Connecting an antenna (aerial)/Set Top Box/ recorder (e.g. DVD recorder) Connecting a Set Top Box/recorder (e.g. DVD recorder) with SCART Set Top Box/recorder (e.g. DVD recorder) ~ • Right Angle Type Universal SCART Lead is recommended for this connection. Connecting a Set Top Box/recorder (e.g. DVD recorder) with HDMI Getting Started Set Top Box/recorder (e.g. DVD recorder) 4: Connecting audio/video devices Audio/video device 11 GB 12 GB 5: Preventing the TV from toppling over 1 Install a wood screw (4 mm in diameter, not supplied) in the TV stand. 2 Install a machine screw (M4, not supplied) into the screw hole of the TV. 3 Tie the wood screw and the machine screw with a strong cord (not supplied). The length of the M4 machine screw differs depending on the cord diameter. Please refer to below illustration. 6: Organising the AC power cord (mains lead)/ Bundling the cables B KDL-46/40/32CX52x B Except KDL-46/40/32CX52x ~ • Before bundling the cables, remove the cable holder from the AC cover (see step 1 and 2). Reuse the cable holder...
Эта инструкция также подходит к моделям:Телевизоры - KDL-32EX721 (3.47 mb)
Телевизоры - KDL-32EX723 (3.47 mb)
Телевизоры - KDL-32EX724 (3.47 mb)
Телевизоры - KDL-37EX521 (3.47 mb)