Оценок - 5, средний балл: 3.8
(
)
)
|
К этому устройству также есть другие инструкции:
Телевизоры - KDL-32EX401 (8.93 mb)
Телевизоры - KDL-32EX401 (9.13 mb)
Фрагмент инструкции
• Do not place the remote in a location near a heat source, a place subject to direct sunlight, or a damp room. 2: Attaching the stand Follow the assembling steps required to place on a TV stand. 1 Refer to the supplied Table-Top Stand leaflet for proper attachment for some TV models. 2 Place the TV set on the stand. Take care not to interfere with cables. 3 Fix the TV to the stand according to the arrow marks that guide the screw holes using the supplied screws. Only for KDL-22EX3xx ~ • If using an electric screwdriver, set the tightening torque at approximately 1.5 N·m (15 kgf·cm). 4 GB 3:3: Connecting an aerial/cable only Terrestrial signal or cable Coaxial cable Connecting an aerial/cable/VCR/DVD recorder with SCART Scart lead Coaxial cable Coaxial cable Terrestrial signal orcable VCR/DVD recorder ~ • AV1 outputs available only for analogue TV. • AV2 outputs to the current screen (except PC, HDMI, Component, USB). Connecting an aerial/cable/VCR/DVD recorder with HDMI Start-up HDMI cable Coaxial cable Coaxial cable Terrestrial signal or cable VCR/DVD recorder 4: Preventing the TV from toppling over 2 1 3 1 Install a wood screw (4 mm in diameter, not supplied) in the TV stand. Continued 5 GB 6 GB 2 Install a machine screw (M4 . 16, not supplied) into the screw hole of the TV. 3 Tie the wood screw and the machine screw with a strong cord. z • An optional Sony support belt kit is used to secure the TV. Contact your nearest Sony Service Centre to purchase a kit. Have your TV model name ready for reference. 5: Bundling the cables (only for KDL-40/32NX5xx) You can bundle the connecting cables as illustrated below. ~ • Do not bundle the mains lead with other connecting cables. 6: Selecting the language, country/region and location 1 Connect the TV to your mains socket (220-240V AC, 50Hz). 2 Press 1 on the side of the TV. When you turn on the TV for the first time, the Language menu appears on the screen. ~ • When you turn on the TV, the power indicator light up in green. 3 Press F/f to select the language displayed on the menu screens, then press . KDL-32NX5xx KDL-40NX5xx 3,4,5 4 Press F/f to select the country/region in which you will operate the TV, then press . 4 Press F/f to select the country/region in which you will operate the TV, then press . If the country/region which you want to use on the TV does not appear in the list, select “-” instead of a country/region. 5Press F/f to select the location type in which you will operate the TV, then press . In Shop mode, some settings will be periodically reset for Shop usage. This option selects the initial picture mode appropriate for the typical lighting condition in these environments. 7: Auto-tuning the TV 1 Press . 2 Press F/f to select “Antenna” or “Cable”, then press . If you select “Cable”, the screen for selecting the scan type appears. See “To tune the TV for Cable connection” (page 7). The TV starts searching for all available digital channels, followed by all available analogue channels. T...
Эта инструкция также подходит к моделям:Телевизоры - KDL-32BX300 (1.08 mb)
Телевизоры - KDL-32BX400 (1.08 mb)
Телевизоры - KDL-40BX400 (1.08 mb)
Телевизоры - KDL-22EX302 (1.08 mb)