Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
1 2 “PlayStation”* Decoder VCR Decoder Hi-fi DVD When you connect the headphones, the TV speakers will automatically be muted DVD 8mm/Hi8/ DVC camcorder S VHS/Hi8DVC camcorder B DC A F E * “PlayStation” is a product of Sony Computer Entertainment, Inc. * “PlayStation” is a trademark of Sony Computer Entertainment, Inc. To avoid picture distorsion, do not connect external equipment to connectors Aand Bat the same time. Connecting a VCR: To connect a VCR, please refer to the section “Connecting the aerial and VCR” of this instruction manual. We recommend you connect your VCR using a scart lead. If you do not have a scart lead, tune in the VCR test signal to the TV programme number “0” by using the “Manual Programme Preset” option. (for details of how to manually programme these presets, see page 13, step a). Refer to your VCR instruction manual to find out how to find the output channel of your VCR. Connecting a VCR that supports Smartlink: Smartlink is a direct link between the TV set and the VCR. For more information on Smartlink, please refer to the instruction manual of your VCR. If you use a VCR that supports Smartlink, please connect the VCR by using a Scart lead to the Scart :2/qF. If you have connected a decoder to the Scart :2/qor through a VCR connected to this Scart: Select the “Manual Programme Preset” option in the “Set Up” menu and after entering in the “Decoder**” option, select “On” (by using or ). Repeat this option for each scrambling signal. **This option is only available depending on the country you have selected in the “Language/Country” menu. continued... Additional Information Connecting to external Audio Equipment: Plug in your Hi-Fi equipment to the audio output sockets Eif you wish to amplify the audio output from TV. Next, using the menu system, select the “Sound Adjustment” menu. Enter the “Detail Adjustment” option and set “TV Speakers” to “Off”. The audio level of the external speakers can be modified by pressing the volume buttons on the remote control. Also treble and bass settings can be modified through the “Sound Adjustment” menu. To enjoy “Dolby Virtual” sound effect through your Hi-Fi equipment: Place the speakers of your equipment in front of your sitting place and besides the TV set but keep a distance of 50 cm from each speaker to the TV set. Then by using the menu system, select the menu “Sound Adjustment”. Next select “Detail Adjustment” and set “Dolby Virtual” to “On”. Using Optional Equipment Your sitting position~50° Right Hi-FiLeft Hi-Fi speakerspeaker GB 1 Connect your equipment to the designated TV socket, as indicated in the previous page. 2 Switch on the connected equipment. 3 To watch the picture of the connected equipment, press the button repeatedly until the correct input symbol appears on the screen. Symbol Input Signals 1 • Audio / video input signal through the Scart connector D • RGB input signal through the Scart connector D. This symbol appears only if a RGB source has been connected. 2 • Audio / video input signal through the Scart connector F. S 2 • S Video input signal through the Scart connector F. 3 • Video input signal through the phono socket Band Audio input signal through C. S 3 • S Video Input signal through the front S Video input jack Aand Audio signal through C. 4 Press button on the remote control to return to the normal TV picture. For Mono Equipment Connect the phono plug to the L/G/S/I socket on the front of the TV and select 3 or S 3 input signal using the instructions above. Finally, refer to the “Sound Adjustment” section of this manual and select “Dual Sound” “A” on the sound menu screen. Additional Information 19 2 3 1 2 3 1 Remote Control Configuration for VCR/DVD This remote control is set by default to operate basic functions of this Sony TV, Sony DVD and most of Sony VCR when batteries are initially installed. To control other VCR and DVD major brands and some Sony VCR models, please complete the following steps: •Before you start, look up the 3 digit code for your brand of DVD or VCR from the list below. On those brands that have more than one code, enter the first code number. •Sony will endeavour to update the software according to market changes. Therefore, please refer to code table included with the remote control for latest code set. 1 Press the Media Selector button on the remote control repeatedly until the required VCR or DVD green light is lit. If Media Selector is on TV position, code numbers will not be stored. 2 Before the green light goes out, press and hold the yellow button for approximately 6 seconds until the green light starts flashing. 3 Whilst the green light is flashing, enter all three digits of the code for your brand using the number buttons on the remote control. If your selected code is entered correctly, all three green lights will be lit momentarily. 4 Turn on your brand VCR or DVD and check that the main functions work. • If your device is not working or some of the functions do not work pleas...
Эта инструкция также подходит к моделям:Телевизоры - KV-28LS35B (2.49 mb)