Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
Press the COUNTER RESET button on the remote control to set the counter to “00:00:00” before playing the tape. The tape counter is automatically reset to zero whenever a cassette is inserted. The Video TV keeps counting the length of the tape being played. Note, however, that the tape counter does not count the portions without video signals recorded. Linear tape counter VCR-Basic Operations Recording TV programmes 1 In standby mode, press the standby button to turn on the Video TV. 2 Insert a cassette with a safety tab. 3 Press PROGR + or –, or the number buttons to select the programme number. 4 Press TAPE SPEED to select the recording speed: SP for Standard Play or LP for Long Play. • In SP mode, the tape runs twice as fast as the LP mode. This means that in LP mode you can record twice as much as you can in SP mode. 5 Press REC r. The REC indicator on the front of the Video TV lights up and recording begins. To stop recording Press STOP p. • When the tape reaches the end, the Video TV rewinds the tape automatically to the beginning, then stops. This function does not work when the power of the Video TV is off. To pause recording You can cut out an unwanted scene during recording with this button. GB 1 Press PAUSE Pwhen an unwanted scene appears on the screen, then recording pauses. 2 Press PAUSE Pagain to release the pause mode at the desired scene, then recording resumes from the point set in step 1. • When the recording pause mode lasts for about 5 minutes, the Video TV stops recording to prevent tape damage. Continues Recording with the TV off Whilst you are recording, press . The Video TV is turned off. However, recording continues and the REC indicator on the Video TV lights up. VCR-Recording 11 Recording TV programmes using DIALTIMER The Dial-Timer recording function allows you to preset your Video TV to record one programme within a 24 hour period. For setting the Dial-Timer, use the DIAL TIMER button on the Video TV. Before you begin: • Make sure that the clock is set correctly. If it is not, refer to the “Setting the Clock Manually” section of this instruction manual (see page 7). • Make sure that the loaded cassette has its safety tab intact. • Make sure that the Video TV is not in the timer recording standby mode (the TIMER REC indicator on the Video TV should not be lit). 1 In standby mode, press the standby button to turn on the Video TV. 2 Press DIAL TIMER. The “Dial Timer” menu appears on the screen. 3 Turn DIAL TIMER to set the hour of the start time, then press DIAL TIMER to confirm. 4 Proceed in the same way as in step 3 to set the minutes of the recording start time, the recording time period and programme number to be recorded. • The hour increases or decreases by one hour. • The minutes increase or decrease by one minute. • The recording time period increases or decreases by 15 minutes. • The programme position changes as follows 0 <—> 1 <—> 2... <—> 99 <—> L1 <—> L 2 <—> 0 <—>1 • L1 is used for the equipment connected to the Scart connector :1/ on the rear of the Video TV. • L2 is used for the equipment connected to the front connectors …and . 5 With TAPE SPEED highlighted, turn the DIAL TIMER to select the recording speed: SP for Standard Play or LP for Long Play, then press the DIAL TIMER. • In LP mode you can record twice as much you can in SP mode. 6 Turn DIAL TIMER to move the cursor to OK, then press DIAL TIMER to confirm all the settings. • If a warning message appears on the screen, the recording will be cancelled. You must re-enter again the Dial timer settings. The Dial Timer indicator on the Video TV lights up and the Video TV enters into timer recording standby mode. Changing or Cancelling the Dial Timer settings 1 Press DIAL TIMER. The Dial Timer menu appears on the screen. 2 Turn DIAL TIMER to CHANGE (to change the recording settings) or to CLEAR (to clear the recording settings) and press DIAL TIMER. 3 a) If you have selected CLEAR, press DIAL TIMER and all the settings will be cleared. b) If you have selected CHANGE, you can change all the settings by following steps from 2 to 5 of the above section “Recording TV Programmes using DIAL TIMER”. Press Turn Dial Timer 23 SAT 23:00 START DURATION PROG 23 22:00 11:00 01 SAT TAPE SPEED: SP OK CHANGE CLEAR OK SELECT PROG 01 CLEAR 23 SAT 23:00 Turn START23 22:00SAT TAPE SPEED: OK Dial Timer SELECT Press DURATION 11:00 SP CHANGE OK VCR-Recording Recording TV Programmes Using the Timer This function allows you to preset your Video TV to record up to 5 programmes within a one-month period. Before you begin: • Make sure that the clock is set correctly. if it is not, please refer to the section “Setting the Clock Manually”(see page 7). • Make sure that the loaded cassette has its safety tab intact. Setting the Timer 1 In standby mode, press the standby button to turn on the Video TV. 2 Press the TIMER REC button to display the Programme List menu. 3 Press or repeatedly to set the date (for daily and weekly recording, refer to the...
Эта инструкция также подходит к моделям:Телевизоры - KV-14FV1U (4.94 mb)