Оценок - 2, средний балл: 4 ( )

Производитель: Sony Размер: 5.96 mb Название файла: Язык инструкции:

Фото и характеристики  Sony  KDL-26V4000

Note that the interlock setting must also be made on the connected “Control for HDMI” compatible equipment side. “Control for HDMI”: This sets whether to interlock the “Control for HDMI” compatible equipment and the TV. When set to “On”, the following menu items can be performed. However, power consumption in standby mode is higher than usual. “Auto Devices Off”: When this is set to “On”, the “Control for HDMI” compatible equipment turn on and off interlocked with the TV. “Auto TV On”: When this is set to “On” and if the connected “Control for HDMI” compatible equipment is turned on, the TV automatically turns on, and the displays the HDMI input from the connected equipment. “Device List Update”: Creates or updates the “HDMI Device List”. Up to 11 “Control for HDMI” compatible equipment can be connected, and up to 5 equipment can be connected to a single socket. Be sure to update the “HDMI Device List” when you change the “Control for HDMI” compatible equipment connections or settings. Select them manually one by one until getting a correct picture for several seconds. “HDMI Device List”: Displays the connected “Control for HDMI” compatible equipments. Sound Offset Sets an independent volume level to each equipment connected to the TV. PC Audio Input Selects the sound from the connected equipment HDMI 3 (DVI-HDMI) or PC (page 17). Manual Programme Preset Before selecting “Label”/“AFT”/“Audio Filter”/“LNA”/“Skip”/“Decoder”, press F/f to select the programme number you want to modify. Then, press . System Presets programme channels manually. 1 Press F/f to select “System”, then press . 2 Press F/f to select one of the following TV broadcast systems, then press G. B/G: For western European countries/regions D/K: For eastern European countries/regions 24 GB L: For France I: For the United Kingdom ~ Depending on the country/region selected for “Country” (page 6), this option may not be available. Channel 1 Press F/f to select “Channel”, then press . 2 Press F/f to select “S” (for cable channels) or “C” (for terrestrial channels), then press g. 3 Tune the channels as follows: If you do not know the channel number (frequency) Press F/f to search for the next available channel. When a channel has been found, the search will stop. To continue searching, press F/f. If you know the channel number (frequency) Press the number buttons to enter the channel number of the broadcast you want or your VCR/ DVD recorder channel number. 4 Press to jump to “Confirm”, then press . Repeat the procedure above to preset other channels manually. Label Assigns a name of your choice, up to five letters or numbers, to the selected channel. This name will be displayed briefly on the screen when the channel is selected. To input characters, follow steps 1 to 3 of “Edit:” (page 24). AFT Allows you to fine-tune the selected programme number manually if you feel that a slight tuning adjustment will improve the picture quality. Audio Filter Improves the sound for individual channels in the case of distortion in mono broadcasts. Sometimes a non-standard broadcast signal can cause sound distortion or intermittent sound muting when watching mono programmes. If you do not experience any sound distortion, we recommend that you leave this option set to the factory setting “Off”. ~ You cannot receive stereo or dual sound when “Low” or “High” is selected. “Audio Filter” is not available when “System” is set to “L”. LNA Improves the picture quality for individual channels in the case of very weak broadcast signals (noisy picture). If you cannot see any improvement in the picture quality even if you set to “On”, set this option to “Off” (factory setting). Skip Skips unused analogue channels when you press PROG +/-to select channels. (You can still select a skipped channel using the number buttons.) Decoder Views and records the scrambled channel selected when using a decoder connected directly to scart connector / AV1, or to scart connector / / AV2 via a VCR/ DVD recorder. ~ Depending on the country/region selected for “Country” (page 6), this option may not be available. Confirm Saves changes made to the “Manual Programme Preset” settings. Using ~ “Auto Tuning”, “Programme Sorting” and “Manual Programme Preset” are only available in analogue mode. 25 GB Digital Set-up menu ~ Some functions may not be available in some countries/regions. Digital Tuning Digital Auto Tuning Tunes in the available digital channels. This option allows you to retune the TV after moving house, or to search for new channels that have been launched by broadcasters). For details, see “Autotuning the TV” on page 6. Programme List Edit Removes any unwanted digital channels stored on the TV, and changes the order of the digital channels stored on the TV. 1 Press F/f to select the channel you want to remove or move to a new position. Press the number buttons to enter the known three-digit programme number of the broadcast you want. 2 Remove or change the order of the digital channe...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: