Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Effect of each control If you have made a mistake Press @ to go back to the previous position. To go back to the main menu Keep pressing @. Notes • HUE is only available for NTSC colour systems. • Hall Surround is not available via headphones. Select and press OK Reset Sharpness Brightness Contrast PICTURE CONTROL Colour Resolution (high) Fig. 28 Select and press OK 2 Dual Sound Surround-Mode Grafic Equalizer SOUND CONTROL Hall effect 2 Volume Dual Sound (A) [ ]Hall [ ] [ ]mono[ ]mono Fig. 29 Brightness Fig. 30 Brightness Colour Fig. 31 PICTURE CONTROL Effect Contrast Less More Brightness Darker Brighter Colour Less More Hue Greenish Reddish Sharpness Softer Sharper RESET Resets picture to the factory preset levels. Resolution Normal high: obtain a high quality picture SOUND CONTROL Effect Graphic Equalizer (See page 17 for more information) Surround Mode Off: Normal n Dolby n Hall Y Y Note on LINE OUT Hall Effect Choice between different hall effects The audio level and the dual sound mode output (only if “Hall” is on) Room n Dome n Arena from the > jack on the rear correspond to the Dual Sound A: left channel B: right channel Stereo Mono HEADPHONES VOLUME and DUAL The selected mode of the A-m-B indicator on the TV lights up. SOUND settings. Headphones: Less More 2 Volume When watching a video A: channel 1 n B: channel 2 n PAP (if PAP is switched on you 2 Dual Sound input source with can select the PAP sound for the headphones) stereo sound You can select DUAL Stereo n Mono SOUND to change the sound. 16 Graphic Equalizer Note: The modifications made in “USER” mode will be stored. All other settings are reset to factory-set level when you change to another mode. 1 2 3 4 Using this function you can individually adjust the sound by cutting and boosting selected frequencies. You can also select between the following modes: Flat n Pop n Rock n Jazz n Vocal n User Select “Sound Control” in the main menu, then select “Graphic Equalizer” using >+ or ?– and press OK. The GRAPHIC EQUALIZER menu appears (See Fig. 32). Press OK. The colour of “Mode” changes. Select the desired mode with >+ or ?– and press OK. If you want to modify a mode, select the desired bar of a frequency band using >+ or ?– and press OK. The selected frequency changes colour. Using >+ or ?– adjust the level of frequency and press OK. In this way you can adjust all 5 graphic bars. Press MENU to return to the normal TV mode. Pop Rock Jazz Vocal User TIMER To switch off the timer Select “OFF” in step 3. To check the remaining time Press $. To go back to the normal TV picture Press MENU. 1 2 3 Using the Sleep Timer You can select a time period after which the TV automatically switches into standby mode. Using >+ or ?– select the symbol t for “Timer” and press OK. The TIMER menu appears (see Fig. 33). Press OK. The time period option changes colour. Select the time period with >+ or ?–. The time period (in minutes) changes as follows: 10 n 20 n 30 n 40 n 50 n 60 n 70 n 80 n 90 Fib. 33 4 After selecting the time period, press OK. The cursor moves back to the left margin and the timer starts counting. One minute before the TV switches into standby mode, a message is displayed on the screen. GRAPHIC EQUALIZER Select and press OK [User]Mode: + – 0 100 400 1K 4K 10K Fig. 32 Flat GB TIMER Select and press OK Sleep Timer [ ]10 Min 17 PAP (Picture and Picture) PROGR PROGR 1 1 VTR 1-2-3 MDP 1 2 4 5 3 6 987 0 C SAT + + _ _ MENU+ _ OK + _ RM-838 Notes • RGB input source cannot be displayed in PAP. • PAP is not available in the Zoom mode. • The sound of the right screen is only available via the headphones. • The picture quality of the TV screen and PAP may differ. With this function you can display two screens at the same time. In this way you can watch two TV programmes at the same time. Also you can watch or monitor the video output from any connected equipment (for example from a VCR) while watching TV or vice versa. For information about connection of other equipment, refer to page 23. Main TV picture PAP screen Switching PAP on and off Press to display the screens in 8:9 format. Press twice to display the screens in 4:3 format. The PAP screen will be displayed next to the main TV screen. The PAP screen will come from the source chosen when the TV was last used. To switch PAP off Press repeatedly. Selecting PAP source Press >. The symbol > will be displayed at the bottom, left-hand corner of the screen. Press PROGR +/–, the number buttons or … to select the desired source for the PAP screen. Swapping screens Press . The main screen will switch the picture with the PAP screen. 8: 9 8: 9 4: 3 A B B A A B Freezing the picture You have the possibility to “freeze” the picture of the PAP screen. Press once to freeze and twice to return to the normal screen. A Freeze / A A 16: 9 8: 9 4: 3 A B Freeze / A A Freeze / A B A A B A GB 18 PROGR PROGR 1 1 VTR 1-2-3 MDP 1 2 4 5 3 6 987 0 C SAT + + _ _ MENU+ _ OK + _ RM-838 PROGR PROGR 1 1 VTR 1-2-3 MDP 1 2 4 5 3 6 987 0 C...
Эта инструкция также подходит к моделям:Телевизоры - KL-37W1U (477.16 kb)