Оценок - 3, средний балл: 4.7 ( )

Производитель: Sony Размер: 5.28 mb Название файла: Язык инструкции:

Фото и характеристики  Sony  KDL-52W3000

• X REC PAUSE: Pauses the recording. • x REC STOP: Stops the recording. 5 F1/F2 • Selects a disc when using a DVD changer. • Selects a function when using a combination unit (e.g. a BD/DVD). For details, see the operating instructions supplied with the DVD changer or combination unit. 6 BD/DVD MENU Displays the DVD disc menu. For details, see the operating instructions supplied with the connected equipment. 7 BD/DVD TOP MENU Displays the top menu of the DVD disc. For details, see the operating instructions supplied with the connected equipment. z The H button has a tactile dot. Use the tactile dot as a reference when operating other equipment. Programming the remote This remote is preset to operate Sony TVs, most Sony BDs, DVDs and AMPs (Home Theatre, etc.). To control BDs and DVDs of other manufacturers (and some other Sony BD, DVD and AMP models), do the following procedure to programme the remote. ~ Before you start, look up the three-digit code for your brand of BD, DVD or AMP from the “Manufacturer’s codes” on page 24. 1 2 1 3 1 Press and hold the BD, DVD or AMP function button you want to programme on the remote, then press / , keeping the function button pressed down. The selected function button (BD, DVD or AMP) will flash. 2 Press the number buttons to enter the three-digit manufacturer’s code number when the button flashes. If code is not entered within 10 seconds, you must perform the step 1 again. 3 Press . When the programming is correct, the selected function button will flash twice, and when not, it will flash five times. 4 Turn on your equipment and check that the following main functions work. H (playback), x (stop), m (rewind), M (fast forward), channel selection for both BDs and DVDs, TOP MENU/MENU and F/f/G/g only for DVDs. If your equipment is not working, or some of the functions do not work Enter the correct code or try the next code listed for the brand. However, not all models of every brand may be covered. To return to normal TV operation Press the TV function button. Manufacturer’s codes DVD brand list DVD Player Brand Code SONY 001, 029, 030, 036 – 044, 053 – 055 AIWA 021 AKAI 032 DENON 018, 027, 020, 002 GRUNDIG 009, 028, 023, 024, 016, 003 HITACHI 025, 026, 015, 004, 035 JVC 006, 017 KENWOOD 008 LG 015, 014, 034 LOEWE 009, 028, 023, 024, 016, 003 MATSUI 013, 016 ONKYO 022, 033 PANASONIC 018, 027, 020, 002, 045 – 047 24 GB Brand Code PHILIPS 009, 028, 023, 024, 016, 003, 031 PIONEER 004, 050, 051, 052 SAMSUNG 011, 014 SANYO 007 SHARP 019, 027 THOMSON 012 TOSHIBA 003, 048, 049 YAMAHA 018, 027, 020, 002 BD (Blu-ray Disc) Player Brand Code SONY 101 – 103 DVD/VCR Player Brand Code SONY 251 DVD recorder Brand Code SONY 201 – 203 VCR brand list Brand Code SONY 301 – 310, 362 AIWA 325, 331, 351 AKAI 326, 329, 330 DAEWOO 342, 343 GRUNDIG 358, 355, 360, 361, 320, 351, 366 HITACHI 327, 333, 334 JVC 314, 315, 322, 344, 352 – 354, 348, 349 LG 332, 338 LOEWE 358, 355, 360, 361, 320, 351 MATSUI 356, 357 ORION 328 PANASONIC 321, 323 PHILIPS 311 – 313, 316 – 318, 358, 359, 363, 364 SAMSUNG 339 – 341, 345 SANYO 335, 336 Brand Code SHARP 324 THOMSON 319, 350, 365 TOSHIBA 337 AUX Sony systems brand list DAV Home Theatre System Brand Code SONY (DAV) 401 – 404 AV receiver Brand Code SONY 451 – 454 Digital terrestrial receiver Brand Code SONY 501 – 503 Using Optional Equipment 25 GB Using HDMI control The HDMI control function allows equipment to control each other using HDMI CEC (Consumer Electronics Control) specified by HDMI. You can connect Sony HDMI control compatible equipment such as TVs, hard disk DVD recorders and audio systems (with HDMI cables) to let them work integratedly. Be sure to correctly connect and set the compatible equipment to use the HDMI control function. To connect the HDMI control compatible equipment Connect the compatible equipment and the TV with an HDMI cable. When connecting an audio system, in addition to the HDMI cable, be sure to also connect the DIGITAL OUT (OPTICAL) socket of the TV and the audio system using an optical audio cable. For details, see page 20. To make the HDMI control settings HDMI control must be set on both the TV side and the connected equipment side. See “HDMI Set-up” on page 38 for the TV side settings. See the operating instructions of the connected equipment for setting details. HDMI control functions • Turns the connected equipment automatically off when you turn the TV off. • Turns the TV on and automatically switches the input to the connected equipment when the equipment starts to play. • If you turn on a connected audio system while the TV is on, the sound output switches from the TV speaker to the audio system. • Adjusts the volume and mutes the sound of a connected audio system. 26 GB Using Menu Functions Navigating through menus Menu functions allow you to enjoy various convenient features of this TV. You can easily select channels or inputs sources and change the settings for your TV. 2 2 1 1 Press MENU. 2 Press F/f to select an opti...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: