Оценок - 4, средний балл: 4.5
(
)
)
|
Фото и характеристики Sony KDL-26U3000 |
К этому устройству также есть другие инструкции:
Телевизоры - KDL-26U3000 (1.71 mb)
Телевизоры - KDL-26U3000 (22.96 mb)
Телевизоры - KDL-26U3000 (28.47 mb)
Телевизоры - KDL-26U3000 (22.76 mb)
Фрагмент инструкции
The picture from the connected equipment appears on the screen. For an auto-tuned VCR (page 7) In analogue mode, press PROG +/-, or the number buttons, to select the video channel. For other connected equipment Press / to display the connected equipment list. Press F/f to select the desired input source, then press . (The highlighted item is selected if 2 seconds pass without any operation after pressing F/ f.) When the input source is set to “Skip” in the “AV Preset” menu under the “Set-up” menu (page 27), that input does not appear in the list. Symbol on the Description screen AV1/ AV1 To see the equipment connected to A. AV2/ AV2 To see the equipment connected to B. ~ SmartLink is a direct link between the TV and a VCR/DVD recorder. AV3 AV4 To see the equipment connected to C. HDMI IN 4*. To see the equipment connected to D. If the equipment has a DVI socket, connect the DVI socket to the HDMI IN socket through a DVI-HDMI adaptor interface (not supplied), and connect the equipment’s audio out sockets to the audio in HDMI IN sockets. AV5 HDMI IN 5*. To see the equipment connected to E. * ~ • Be sure to use only an HDMI cable that bears • When HDMI control compatible equipment communication with the connected equipment Refer to page 19 to set up this communication. Symbol on the Description screen AV6 orTo see the equipment connected to H. AV6 z To avoid picture noise, do not connect the camcorder to the video socket and the S video socket 6 at the same time. If you connect mono equipment, connect to the L socket 6. PC To see the equipment connected to G. z It is recommended to use a PC cable with ferrites. To connect Do this Headphones I Connect to the i socket to listen to sound from the TV on headphones. Conditional To use Pay Per View services. Access Module For details, refer to the instruction (CAM) J manual supplied with your CAM. To use the CAM, remove the rubber cover from the CAM slot. Switch off the TV when inserting your CAM into the CAM slot. When you do not use the CAM, we recommend that you replace the cover on the CAM slot. ~ CAM is not supported in all countries. Please check with your authorized dealer. Hi-Fi audio Connect to the audio output sockets equipment F to listen to the sound from the TV on Hi-Fi audio equipment. Additional operations To Do this Return to normal TV Press DIGITAL or ANALOG. mode Access the Digital Press . Favourites (in digital For details, see page 16. mode only) Change the volume of Press 2 +/-. the connected HDMI control compatible audio system Mute the sound of the Press % . connected HDMI Press again to restore. control compatible audio system 18 GB Using the Tools menu Press TOOLS to display the following options when viewing pictures from connected equipment. Options Description Close Closes the Tools menu. Picture Mode (except PC input mode) See page 21. Display Mode (in PC input mode only) See page 21. Sound Effect See page 23. Speaker See page 24. PIP (in PC input mode only) See page 19. H Cen...
Эта инструкция также подходит к моделям:Телевизоры - KDL-26P3000 (4.25 mb)
Телевизоры - KDL-26P300H (4.25 mb)
Телевизоры - KDL-26P3020 (4.25 mb)
Телевизоры - KDL-26P302H (4.25 mb)