Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Transmission >>To control volume mute on/off. You can also adjust mute using the MUTE button on remote control. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : Power On [k][e][ ][Set ID][ ][Data][Cr] Ack Data 00 : Volume mute on (Volume off) 01 : Volume mute off (Volume on) [a][ ][Set ID][ ][OK/NG][Data][x] >>To show Power On/Off. Transmission Ack [e][ ][Set ID][ ][OK/NG][Data][x] [k][a][ ][Set ID][ ][FF][Cr] 05. Volume Control (Command: k f) Ack >>To adjust volume. You can also adjust volume with the VOLUME buttons on remote control. Transmission [a][ ][Set ID][ ][OK/NG][Data][x] * Similarly, if other functions transmit ‘0xFF’ data based on this format, Acknowledgement data feed back presents status about each function. * OK Ack., Error Ack. and other message may display on the screen when TV is power On. [k][f][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 * Refer to ‘Real data mapping’. See page 134. Ack 02. Aspect Ratio (Command: k c) (Main Picture Size) [f][ ][Set ID][ ][OK/NG][Data][x] >>To adjust the screen format. (Main picture format) You can also adjust the screen format using the Aspect Ratio in the Q.MENU. or PICTURE menu. Transmission 06. Contrast (Command: k g) >>To adjust screen contrast. You can also adjust contrast in the PICTURE menu. Transmission [k][c][ ][Set ID][ ][Data][Cr] [k][g][ ][Set ID][ ][Data][Cr] Data 01 : Normal screen (4:3) 02 : Wide screen (16:9) 04 : Zoom 06 : Original 07 : 14:9 09 : Just Scan 0B : Full Wide 10 to 1F : Cinema Zoom 1 to 16 Data Min : 00 to Max : 64 * Refer to ‘Real data mapping’. See page 134. Ack Ack [g][ ][Set ID][ ][OK/NG][Data][x] [c][ ][Set ID][ ][OK/NG][Data][x] * Using the PC input, you select either 16:9 or 4:3 screen aspect ratio. * In DTV/HDMI (1080i 50 Hz / 60 Hz, 720p 50Hz / 60 Hz, 1080p 24 Hz / 30 Hz / 50 Hz / 60 Hz), Component( 720p, 1080i, 1080p 50 Hz / 60 Hz) mode, Just Scan is available. * Full Wide is supported only for Digital, Analogue, AV. 07. Brightness (Command: k h) >>To adjust screen brightness. You can also adjust brightness in the PICTURE menu. Transmission [k][h][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 * Refer to ‘Real data mapping’. See page 134. Ack 03. Screen Mute (Command: k d) [h][ ][Set ID][ ][OK/NG][Data][x] >>To select screen mute on/off. Transmission 08. Colour (Command: k i) [k][d][ ][Set ID][ ][Data][Cr] >>To adjust the screen colour. You can also adjust colour in the PICTURE menu. Transmission Data 00 : Screen mute off (Picture on) Video mute off 01 : Screen mute on (Picture off) 10 : Video mute on [k][i][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 * Refer to ‘Real data mapping’. See page 134. Ack [d][ ][Set ID][ ][OK/NG][Data][x] Ack [i][ ][Set ID][ ][OK/NG][Data][x] * In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute on, TV will not display OSD. 09. Tint (Command: k j) 13. Treble (Command: k r) >>To adjust the screen tint. You can also adjust tint in the PICTURE menu. Transmission >>To adjust treble. You can also adjust treble in the AUDIO menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] [k][r][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64 * Refer to ‘Real data mapping’. See page 134. Data Min : 00 to Max : 64 * Refer to ‘Real data mapping’. See page 134. Ack Ack [j][ ][Set ID][ ][OK/NG][Data][x] [r][ ][Set ID][ ][OK/NG][Data][x] 14. Bass (Command: k s) 10. Sharpness (Command: k k) >>To adjust bass. You can also adjust bass in the AUDIO menu. Transmission >>To adjust the screen sharpness. You can also adjust sharpness in the PICTURE menu. Transmission [k][s][ ][Set ID][ ][Data][Cr] [k][k][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 * Refer to ‘Real data mapping’. See page 134. Data Min : 00 to Max : 64 * Refer to ‘Real data mapping’. See page 134. Ack Ack [k][ ][Set ID][ ][OK/NG][Data][x] [s][ ][Set ID][ ][OK/NG][Data][x] 15. Balance (Command: k t) >>To adjust balance. You can also adjust balance in the AUDIO menu. Transmission 11. OSD Select (Command: k l) >>To select OSD (On Screen Display) on/off when controlling remotely. Transmission [k][t][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 * Refer to ‘Real data mapping’. See page 134. [k][l][ ][Set ID][ ][Data][Cr] Ack Data 00 : OSD off 01 : OSD on [t][ ][Set ID][ ][OK/NG][Data][x] Ack [l][ ][Set ID][ ][OK/NG][Data][x] 16. Colour Temperature (Command: x u) >>To adjust colour temperature. You can also adjust Colour Temperature in the PICTURE menu. Transmission 12. Remote control lock mode (Command: k m) >>To lock the front panel controls on the monitor and remote control. Transmission [x][u][ ][Set ID][ ][Data][Cr] [k][m][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 * Refer to ‘Real data mapping’. See page 134. Data 00 : Lock off 01 : Lock on Ack Ack [m][ ][Set ID][ ][OK/NG][Data][x] [u][ ][Set ID][ ][OK/NG][Data][x] * If you are not using the remote control, use this mode. When main power is on/off, external control lock is released. * In the standby mode,...
Эта инструкция также подходит к моделям:Телевизоры - 37LD650H (15.21 mb)
Телевизоры - 47LD650H (15.21 mb)
Телевизоры - 42LD650H (15.21 mb)
Телевизоры - 47LV375H (15.21 mb)