Оценок - 0, средний балл: 0 ( )

Производитель: LG Размер: 6.29 mb Название файла: Язык инструкции:

Фото и характеристики  LG  26LT380H

Volume Mute (Command: k e) >To control volume mute on/off. You can also adjust mute using the MUTE button on remote control. Data 00 : Volume mute on (Volume off) 01 : Volume mute off (Volume on) Transmission [k][e][ ][Set ID][ ][Data][Cr] Ack [e][ ][Set ID][ ][OK/NG][Data][x] 02. Aspect Ratio (Command: k c) (Main Picture Size) >To adjust the screen format. (Main picture format) You can also adjust the screen format using the Aspect Ratio in the Q.MENU. or PICTURE menu. Data 01 : Normal screen (4:3) 02 : Wide screen (16:9) 04 : Zoom 06 : Original 07 : 14:9 09 : Just Scan 0B : Full Wide 10 to 1F : Cinema Zoom 1 to 16 Transmission [k][c][ ][Set ID][ ][Data][Cr] * Using the PC input, you select either 16:9 or 4:3 screen aspect ratio. * In DTV/HDMI (1080i 50 Hz / 60 Hz, 720p 50Hz / 60 Hz, 1080p 24 Hz / 30 Hz / 50 Hz / 60 Hz), Component( 720p, 1080i, 1080p 50 Hz / 60 Hz) mode, Just Scan is available. * Full Wide is supported only for DTV. Ack [c][ ][Set ID][ ][OK/NG][Data][x] 03. Screen Mute (Command: k d) >To select screen mute on/off. Data 00 : Screen mute off (Picture on) Video mute off 01 : Screen mute on (Picture off) 10 : Video mute on * In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute on, TV will not display OSD. Transmission [k][d][ ][Set ID][ ][Data][Cr] Ack [d][ ][Set ID][ ][OK/NG][Data][x] 05. Volume Control (Command: k f) >To adjust volume. You can also adjust volume with the volume buttons on remote control. Data Min : 00 to Max : 64 * Refer to ‘Real data mapping’. See p.33. Transmission [k][f][ ][Set ID][ ][Data][Cr] Ack [f][ ][Set ID][ ][OK/NG][Data][x] 06. Contrast (Command: k g) >To adjust screen contrast. You can also adjust contrast in the PICTURE menu. Data Min : 00 to Max : 64 * Refer to ‘Real data mapping’. See p.33. Transmission [k][g][ ][Set ID][ ][Data][Cr] Ack [g][ ][Set ID][ ][OK/NG][Data][x] 07. Brightness (Command: k h) >To adjust screen brightness. You can also adjust brightness in the PICTURE menu. Data Min : 00 to Max : 64 * Refer to ‘Real data mapping’. See p.33. Transmission [k][h][ ][Set ID][ ][Data][Cr] Ack [h][ ][Set ID][ ][OK/NG][Data][x] 01. Power (Command: k a) >To control Power On/Off of the set. Data 00 : Power Off 01 : Power On Transmission[k][a][ ][Set ID][ ][Data][Cr] Ack [a][ ][Set ID][ ][OK/NG][Data][x] >To show Power On/Off. Transmission [k][a][ ][Set ID][ ][FF][Cr] * Similarly, if other functions transmit ‘0xFF’ data based on this format, Acknowledgement data feed back presents status about each function. * OK Ack., Error Ack. and other message may display on the screen when TV is power On. Ack [a][ ][Set ID][ ][OK/NG][Data][x] 31EXTERNAL CONTROL DEVICE SETUP ENGENGLISH 12. Remote control lock mode (Command: k m) >To lock the front panel controls on the monitor and remote control. Transmission [k][m][ ][Set ID][ ][Data][Cr] Data 00 : Lock off 01 : Lock on * If you are not using the remote control, use this mode. When main power is on/off, external control lock is released. * In the standby mode, if key lock is on, TV will not turn on by power on key of IR & Local Key. Ack [m][ ][Set ID][ ][OK/NG][Data][x] 11. OSD Select (Command: k l) >To select OSD (On Screen Display) on/off when controlling remotely. Transmission [k][l][ ][Set ID][ ][Data][Cr] Data 00 : OSD off 01 : OSD on Ack [l][ ][Set ID][ ][OK/NG][Data][x] 09. Tint (Command: k j) >To adjust the screen tint. You can also adjust tint in the PICTURE menu. Data Red : 00 to Green : 64 31EXTERNAL CONTROL DEVICE SETUP ENGENGLISH 12. Remote control lock mode (Command: k m) >To lock the front panel controls on the monitor and remote control. Transmission [k][m][ ][Set ID][ ][Data][Cr] Data 00 : Lock off 01 : Lock on * If you are not using the remote control, use this mode. When main power is on/off, external control lock is released. * In the standby mode, if key lock is on, TV will not turn on by power on key of IR & Local Key. Ack [m][ ][Set ID][ ][OK/NG][Data][x] 11. OSD Select (Command: k l) >To select OSD (On Screen Display) on/off when controlling remotely. Transmission [k][l][ ][Set ID][ ][Data][Cr] Data 00 : OSD off 01 : OSD on Ack [l][ ][Set ID][ ][OK/NG][Data][x] 09. Tint (Command: k j) >To adjust the screen tint. You can also adjust tint in the PICTURE menu. Data Red : 00 to Green : 64 * Refer to ‘Real data mapping’. See p.33. Transmission [k][j][ ][Set ID][ ][Data][Cr] Ack [j][ ][Set ID][ ][OK/NG][Data][x] >To adjust the screen sharpness. You can also adjust sharpness in the PICTURE menu. 10. Sharpness (Command: k k) Data Min : 00 to Max : 64 * Refer to ‘Real data mapping’. See p.33. Transmission [k][k][ ][Set ID][ ][Data][Cr] Ack [k][ ][Set ID][ ][OK/NG][Data][x] 15. Balance (Command: k t) >To adjust balance. You can also adjust balance in the AUDIO menu. Data Min : 00 to Max : 64 * Refer to ‘Real data mapping’. See p.33. Transmission [k][t][ ][Set ID][ ][Data][Cr] Ack [t][ ][Set ID][ ][OK/NG][Data][x] 14. Bass (Command: k s) >To adjust bass. You can also...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: