Оценок - 2, средний балл: 5 ( )

Производитель: Sony Размер: 3.21 mb Название файла: Язык инструкции:

Фото и характеристики  Sony  KDL-32EX728

14 GB – – – For four satellite channels, DiSEqC control A, B, C, and D is required. “LNB Low Band Frequency” and “LNB High Band Frequency”: – Specifies LNB frequency bands. Be sure to check your LNB documentation to set frequencies (normally appears as “L.O. frequency”). – The default values are for a universal LNB. – If your LNB can handle both bands (low and high), you can specify both. If it handles only one, specify low band. “22 kHz Tone”: If your LNB is dual band (low and high bands), set to “Auto”. The TV will take care of everything automatically; otherwise, set to “Off”. “LNB Voltage”: Specifies the set voltage for a dual polarisation LNB. – 13/18V: default. – 14/19V: if LNB cable is over 60m long. – Off: if an external power supply can be used. 3 “Transponder” (for each satellite setting- Satellite 1 to 4): There is no need to set the transponder when you select “Full Scan”. “Scan for new services”: – Tunes to a single transponder. – This is an incremental scan, and it should be used in cases when a new transponder is added to a satellite. – Previously-tuned programmes are kept and found ones are added to the program list of the satellite connection you are editing. 1 Press HOME, then select > “Digital Set-up” > “Satellite Auto Tuning”. 2 Follow the instruction on the Satellite Auto Tuning. ~ • “Scan for new services” is unavailable while performing the initial set-up. • When you scan for the new services, please check if the satellite signal is available. Digital Auto Tuning: When you select “Cable”, we recommend that you select “Quick Scan” for quick tuning. Set “Frequency” and “Network ID” according to the information supplied from your cable provider. If no channel is found using “Quick Scan”, try “Full Scan” (though it may take some time). ~ • “Full Scan” may not be available depending on your region/country. Programme Sorting: Changes the order of analogue channels stored in the TV. 1 Press F/f to select the channel you want to move to a new position, then press . 2 Press F/f to select the new position for the channel, then press . ~ • For satellite channels, select “Satellite Programme Sorting” in “Digital Set-up” of “Settings” to change the order of satellite channels in the same procedure above after initial set-up completed. • You can also tune channels manually. Getting Started 15 GB Using Your BRAVIA TV Using Your BRAVIA TV 1 Turn on the TV. Press 1 on the TV to turn on the TV. 2 Select a mode. 1 3 Select a TV channel. 2 To use Digital Electronic Programme Guide Press GUIDE in digital mode to display the GUIDE programme guide. Use with 0-9 to select digital channels. For channel 3 numbers 10 and above, press the next digit quickly. z • The number 5, N, PROG + and AUDIO buttons on the remote have a tactile dot. Use the tactile dots as a reference when operating the TV. 16 GB Parts and controls of the remote Parts and controls of the remote and see the built-in manual (i-Manual) (page 20). For KDL-55/46/40/37/32EX72x, KDL-46/4...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: