Оценок - 4, средний балл: 3.5
(
)
)
|
Фото и характеристики Sony KDL-46W5720 |
К этому устройству также есть другие инструкции:
Телевизоры - KDL-46W5720 (32.84 mb)
Телевизоры - KDL-46W5720 (32.37 mb)
Фрагмент инструкции
Design and specifications are subject to change without notice. 49 GB PC input signal reference chart for PC input signal reference chart for PC and HDMI IN 1, 2, 3, 4 Resolution Horizontal frequency (kHz) Vertical frequency (Hz) Standard Signals Horizontal (Pixel) . Vertical (Line) VGA 640 . 480 31.5 60 VESA 640 . 480 37.5 75 VESA 720 . 400 31.5 70 VESA SVGA 800 . 600 37.9 60 VESA 800 . 600 46.9 75 VESA XGA 1024 . 768 48.4 60 VESA 1024 . 768 56.5 70 VESA 1024 . 768 60.0 75 VESA WXGA 1280 . 720 45.0 60 EIA 1280 . 768 47.4 60 VESA 1280 . 768 47.8 60 VESA 1280 . 960 60.0 60 VESA 1360 . 768 47.7 60 VESA SXGA 1280 . 1024 64.0 60 VESA HDTV 1920 . 1080 66.6 60 VESA* 1920 . 1080 67.5 60 EIA* * 1080p timing when applied to the HDMI input will be treated as a video timing and not a PC timing. This affects the “Video Settings” menu and “Screen” menu settings. To view PC contents, set “Screen Format” to “Wide” and “Display Area” to “Full Pixel”. ~ • This TV’s PC input does not support Sync on Green or Composite Sync. • This TV’s PC input does not support interlaced signals. • For the best picture quality, it is recommended to use the signals in the above chart with a 60 Hz vertical frequency (boldfaced). 50 GB Troubleshooting Troubleshooting When the 1 (standby) indicator is flashing The self-diagnosis function is activated. 1 Count how many times the 1 (standby) indicator flashes between each two second break. For example, the indicator may flash three times, go off for two seconds, then flash again three times. 2 Press 1 on the TV to turn it off, disconnect the mains lead, and inform your dealer or Sony service centre of how the indicator flashes (number of flashes). When the 1 (standby) indicator is not flashing 1 Check the items in the tables below. 2 If the problem persists, have your TV serviced by qualified service personnel. Condition Explanation/Solution Picture There is no picture (screen is • Check the aerial/antenna/cable connection. dark) and no sound. • Connect the TV to the mains/AC power, and press 1 on the TV. • If the 1 (standby) indicator lights up in red, press "/1. No picture or menu • Press to display the list of inputs, then select the desired input. information from equipment • Check the connection between the optional equipment and the TV. connected to the scart connector appears on the screen. Ghosting occurs, or double • Check the aerial/antenna/cable connection. images appear. • Check the aerial/antenna location and direction. Only snow and noise appear • Check if the aerial/antenna is broken or bent. on the screen. • Check if the aerial/antenna has reached the end of its serviceable life (three to five years for normal use, one to two years when used at the seaside). There is picture or sound noise when viewing a TV channel. Tiny black points and/or bright points appear on the screen. The picture contours are distorted. • Adjust “AFT” (Automatic Fine Tuning) to obtain better picture reception (page 42). • The screen is composed of pixels. Tiny black points and/or bright points (pixels) on the screen do not indicate a malfunction. • Select “Standard” or “Off” in “Motionflow” (page 35) (except for KDL52V55/ 56xx, 46V55/56xx, 40V55/56xx, 37V55/56xx, 32V55/56xx). • Change the current setting of “Film Mode” to other settings (page 35). Additional Information The picture is not displayed in • Select “Reset” (page 34). colour. The picture from equipment • Check the connection of t...
Эта инструкция также подходит к моделям:Телевизоры - KDL-32E5500 (6.41 mb)
Телевизоры - KDL-32E5510 (6.41 mb)
Телевизоры - KDL-32E5520 (6.41 mb)
Телевизоры - KDL-40E5500 (6.41 mb)