Оценок - 3, средний балл: 4.3 ( )

Производитель: Sony Размер: 5.53 mb Название файла: Язык инструкции:

Фото и характеристики  Sony  KDL-20S3040

z To avoid picture noise, do not connect the camcorder to the video socket 5 and the S video socket at the same time. If you connect mono equipment, connect to the L socket 5. PC To see the equipment connected to F. z It is recommended to use a PC cable with ferrites. To connect Do this Headphones H Connect to the i socket to listen to sound from the TV on headphones. Conditional To use Pay Per View services. Access Module For details, refer to the instruction (CAM) I manual supplied with your CAM. To use the CAM, remove the rubber cover from the CAM slot. Switch off the TV when inserting your CAM into the CAM slot. When you do not use the CAM, we recommend that you replace the cover on the CAM slot. ~ CAM is not supported in all countries. Please check with your authorized dealer. Hi-Fi audio Connect to the audio output sockets equipment E to listen to the sound from the TV on Hi-Fi audio equipment. Additional operations To Do this Return to normal TV Press DIGITAL or ANALOG. mode Access the Digital Press . Favourites (in digital For details, see page 15. mode only) Change the volume of Press 2 +/-. the connected HDMI control compatible audio system Mute the sound of the Press %. connected HDMI Press again to restore. control compatible audio system Using Optional 17 GB Using the Tools menu Press TOOLS to display the following options when viewing pictures from connected equipment. Options Description Close Closes the Tools menu. Picture Mode (except PC input mode) See page 20. Display Mode (in PC input mode only) See page 20. Sound Effect See page 22. Speaker See page 23. PIP (in PC input mode only) See page 18. H Centre (in PC input mode only) See page 25. V Lines (in PC input mode only) See page 25. Sleep Timer (except PC input mode) See page 25. Power Saving See page 24. To view two pictures simultaneously – PIP (Picture in Picture) You can view two pictures (PC input and TV programme) on the screen simultaneously. Connect a PC (page 16), and make sure that images from a PC appear on the screen. ~ You cannot display resolutions higher than WXGA (1280 . 768 pixels). 1 Press TOOLS to display the Tools menu. 2 Press F/f to select “PIP”, then press . The picture from the connected PC is displayed with full size and the TV programme is displayed on the right corner. You can use F/f/G/g to move the TV programme screen position. 3 Press number buttons or PROG +/- to select the TV channel. To return to single picture mode Press RETURN. z You can switch the audible picture by selecting “PC Sound/ TV Sound” from the Tools menu. Using HDMI control The HDMI control function allows equipment to control each other using HDMI CEC (Consumer Electronics Control) specified by HDMI. You can perform interlocked control operations between Sony HDMI control compatible equipment such as a TV, DVD recorder with hard disk and audio system by connecting the equipment with HDMI cables. Be sure to correctly connect and set the compatible equipment to use the HDMI control function. To connect the HDMI control compatible equipment Connect the compatible equipment and the TV with an HDMI cable. When connecting an audio system, in addition to the HDMI cable, be sure to also connect the audio output socket of the TV and the audio system. For details, see page 16. To make the HDMI control settings HDMI control must be set on both the TV side and the connected equipment side. See HDMI Set-up (page 27) for the TV side settings. See the operating instructions of the connected equipment for setting details. HDMI control functions • Turns the connected equipment off interlocked with the TV. • Turns the TV on interlocked with the connected equipment and automatically switches the input to the equipment when the equipment starts to play. • If you turn on a connected audio system while the TV is on, the input switches to the audio from the audio system. • Adjusts the volume and mutes the sound of a connected audio system. 18 GB Using MENU Functions Navigating through menus “MENU” allows you to enjoy various convenient features of this TV. You can easily select channels or inputs sources and change the settings for your TV. 2 1 1 Press MENU. 2 Press F/f to select an option, then press . To exit the menu, press MENU. 5 External Inputs Selects equipment connected to your TV. • To watch the desired external input, select the input source, then press . 6 Settings Displays the Settings menu where most of the advanced settings and adjustments are performed. 1 Press F/f to select a menu icon, then press . 2 Press F/f/G/g to select an option or adjust a setting, then press . For details about settings, see page 20 to 30. ~ The options you can adjust vary depending on the situation. Unavailable options are greyed out or not displayed. * This function may not be available in some countries/ regions. Using MENU Select: Enter: Exit: MENU Digital Favourites 1 Digital Favourites* Displays the Favourite list. For details about settings, see page 15. 2 Analogu...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: