Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Give name This menu allows you to change or give a name to the programmes and external connectors. From the Installation menu (to select press . and Y at the same time) : & Select Give name and press u. e Select the programme with the up/down cursor and validate with u. “ Use the left/right cursor to move around the name display area (5 characters). ‘ Use the up/down cursor to select the characters. ( Press u when the name has been entered. The programme name is stored. § Repeat steps e to ( for all programmes or connectors to be named. e To exit, press I several times. Favourite Programmes This menu allows you to select the programmes to be accessed with the @ P # key. From the Installation menu (to select press . and Y at the same time) : & Select Favourite Programmes and press u. The list of favourite programmes is displayed. The programmes that were stored at installation will automatically appear on this list. Setup Menu: see page 13 e Use the up/downcursor to select the required programme. “ Use the left/right cursor to add or remove a programme from the list. ‘ Run through steps e and “ for each programme to be added or removed from the list. ( To exit, press I several times. Picture settings & Press the I key. With the cursor, select PICTURE and press u.The PICTURE menu is displayed : MAIN MENU B Picture Sound Features Programmes PICTURE B Contrast I ----l-----. Brightness Colour Sharpness Tint Digital Scan / Digital Options* Dynamic Contrast DNR * e Use the cursor to adjust (the settings are stored automatically) : • Contrast : this changes the difference between light and dark tones. • Brightness : this changes picture brilliance. • Colour : this changes the intensity of the colour. • Sharpness : this changes the picture definition. • Tint : this changes the colour rendering : Cold (more blue), Normal or Warm (more red). • Digital Scan *: reduces line flicker which is visible on some pictures. • Digital Options *: -100 Hz = 100 Hz processing. -Digital Scan = 100 Hz + Digital Scan. -Natural Motion: 100 Hz + Digital Scan + Natural Motion (Field and line flicker reduction and smooth movement reproduction). -Double lines: Natural Motion plus a doubling of vertical resolution which removes visible picture lines. Advised for NTSC (60Hz) pictures. • Dynamic Contrast : Min, Med (optimum position), Max or Off. Enhances the contrast of details in lighter, average and darker areas. • DNR Dynamic Noise Reduction *: automatically reduces noise (snowy picture) when receiving weak video signals. * (only available on certain versions) The Hue setting will appear if you connect an NTSC peripheral to one of the EXT connectors. “ Press I several times to exit. Sound settings & Press the I key.With the cursor, select SOUND and press u.The SOUND menu is displayed : MAIN MENU Picture B Sound Features Programmes SOUND B Volume I -----l----. Balance Graphic Equalizer Headphone Volume * AVL Delta volume Virtual Dolby effect * e Use the cursor to select a setting (the settings are stored automatically) : • Volume : to adjust the preferred volume. • Balance : to balance the sound on the left and right speakers. • Treble / Bass or Graphic Equaliser (according to the version) : allows you to adjust the tone of the sound. • Headphone volume (according to the version) : allows you to adjust the headphones volume independently from the loud-speakers on the TV set. • AVL (Automatic Volume Leveller): automatically controls the volume and is used to limit increases in sound, especially during programme changes or advertising. • Delta Volume : this is used to compensate any volume discrepancies between the different programmes or EXT connectors. Use the @ P # keys to compare the level of different programmes. • Virtual Dolby effect (according to the version) : select the level of Virtual Dolby effect with the cursor left/right. “ Press I several times to exit. Feature settings & Press I, select FEATURES and press u. The FEATURES menu is displayed : e Use the cursor to adjust : • Sleeptimer : to set the time after which the TV will switch to standby (from 0 to 180 minutes). MAIN MENU Picture Sound B Features Programmes FEATURES B Sleeptimer Off Child lock Subtitle • Child lock : If the chid lock is on, the TV can only be switched on with the remote control. Select On , then turn off the television and hide the remote control. To cancel, change Child Lock to Off. • Subtitles : TV channels with teletext often transmit programmes with subtitles.This function activates or disables the automatic display of teletext subtitling, when it is being transmitted. For each TV channel, first activate the teletext, select the subtitle page, then exit teletext. The subtitle page is then stored, the . symbol appears at the bottom of the screen. “ Press I several times to exit. List of programmes This menu displays the list of available & Press I, select PROGRAMMES and press programmes. u.The list of programmes is displayed. MAIN MENU Picture Sound Fe...
Эта инструкция также подходит к моделям:Телевизоры - 28PW8718/12 (2.74 mb)