Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Source Source Setup EXT1 EXT2 EXT3 EXT4 YPbPr FRONT Centre input Centre in volume This menu allows you to indicate the peripheral you connected to one of the external inputs. & Press the cursor right to enter the list of types of peripherals attached to the selected input. e Select the peripheral device with the cursor up/down. Once you have selected the source type, e.g. DVD, this source will automatically be selected when your remote control is in DVD mode, see p. 3, and when you press the v key on the remote control. Centre input - Centre in volume When you have connected a surround receiver to the TV, see p. 18, the loudspeakers of the TV can act as centre speaker, making a separate centre speaker unnecessary. Select Centre input On or Cinema Link (in case you have connected a Cinema Link Surround receiver). When having selected On you can adjust the Centre in volume with the cursor left/right to correct volume level differences of the external audio receiver and speakers. Note: This is not the case with a Cinema Link surround receiver. Decoder Decoder Setup Programme Status If a decoder or a descrambler is connected, see p. 17, you can define one or more programme numbers as decoder programme numbers. & Select Decoder with the cursor right. e Select Programme. “ Select the programme number under which you have stored the programme coming from your decoder. ‘ Select Status. • Select the input used to connect your decoder: None, EXT1 or EXT2. • Select None if you do not want the selected programme number being activated as a decoder programme number. Note: Select EXT2 when the decoder is connected to your EasyLink video recorder. Demo TV Setup Demo Auto demo ...... Install Dealer demo - Digital options -Light sensor -Comb filter The Demo menu allows to demonstrate the TV features separately or in a continuous loop. If Auto demo has been selected the demo will automatically present the features sequentially in a loop. Press one of the cursor keys to stop the Auto demo. If one of the features has been selected, this particular feature demo will run only once, and the Demo menu will reappear. Note: The Dealer demo is not part of the automatic sequence and can only be activated separately. TV menu Press the MENU key on the remote control to summon the main menu. Note: Dependent on the input signal, one or more menu items may not be selectable. Press the i key on the remote control to get information about the selected menu item. Picture menu Picture Sound Features TV Smart picture Contrast Brightness Colour Sharpness Tint Digital options Dynamic contrast DNR Colour enhancement (Hue) Picture format & Press the cursor right to select Picture. e Select the menu items in the Picture menu with the cursor up/down. “ Adjust the settings with the cursor left/right or enter the list of submenu items with the cursor right. Select a submenu item with the cursor up/down. Note: To remove the menu background before adjusting the picture settings, see Select TV setup, General, p. 8. Smart picture Select Smart picture to display a list of predefined picture settings, each corresponding with specific factory settings. Personal refers to the personal preference settings of picture in the picture menu. Digital options Pixel Plus is the most ideal setting, doubles the horizontal resolution and increases the number of lines with 33%. You may consider to select Movie Plus in case a halo effect should disturb you. Dependent on your own preference, select Progressive scan. Dynamic contrast Sets the level at which the TV automatically enhances the details in dark, middle and light areas of the picture. DNR This sets the level at which noise is measured and reduced in the picture. Colour enhancement This makes the colours more vivid and improves the resolution of details in bright colours. Hue This compensates for the colour variations in NTSC encoded transmissions. Picture format This will adjust the size of the picture dependent on the broadcast format and your preferred setting. Active Control The TV continuously measures and corrects all incoming signals in order to provide the best picture possible. & Press the h key on the remote control. e The Active Control menu appears. “ Press the cursor up/down to select the Active Control values Off, Minimum, Medium (recommended) or Maximum. The picture settings are being optimised continuously and automatically which is displayed by bars. The menu items can not be selected. ‘ Press the cursor right to select Smart Picture. ( Press the cursor up/down to select one of the predefined picture settings. § Press the cursor right to select Active Display. e Press the cursor up/down to select Show bars, one of the Dual screen demos or Off. When you select Dynamic contrast, Pixel Plus, Digital Noise Reduction or Digital Natural Motion, the TV screen is divided into two parts: in the left part the selected picture quality setting is switched off; in the right part it is switched on. Note: Dependen...