Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Please inform yourself about the local rules on the separate collection of electrical and electronic products.The correct disposal of your old product helps prevent potentially negative consequences on the environment and human health. 4 EN The packaging of this product is intended to be recycled. Contact your local authorities for information about how to recycle the packaging. English When this logo is attached to a product, it means a financial contribution has been paid to the associated national recover y and recycling system. © 2010 Koninklijke Philips Electronics N.V. All rights reser ved. Reproduction in whole or in par t is prohibited without the written consent of the copyright owner.Trademarks are the proper ty of Koninklijke Philips Electronics N.V. or their respective owners. EN 5 2 Your SDV6225T/27 Congratulations on your purchase and welcome to Philips! To fully benefit from the suppor t that Philips offers, register your product at com/welcome. Overview 1 100 -240V AC / 6V DC power adaptor 5 6 Out to T V connection UHF antenna 2 3 Power switch / gain control knob VHF antenna 7 8 Stand LED power indicator 4 6V DC connection 6 EN English 3 Get started To ensure the antenna to work properly, read the user manual of your television before you star t. Set the television so that it receives the signal from an ANTENNA instead of CABLE or SATELLITE. Installation Determine the signal strength Before Installation, determine the best location for optimum reception. It is impor tant for the antenna to have an unobstructed path to the transmitter. For best results, ensure the antenna faces the location of the transmitter. Note • Choose a location near a window which gives the antenna a clear view of the transmitter. Note • Place the antenna away from the metal surface to avoid interference. Connect to the TV 1 Connect the coaxial cable to the TV. 2 Connect the DC plug to the antenna and the power supply to a 100-240V outlet. EN 7 4 Set upSDV6225T/27 For VHF reception 1 Ex tend the telescopic dipoles to the longest possible length. 2Turn the TV to the desired channel. Move the dipoles in different directions up and down until the reception is achieved. ................................ 3 Turnontheamplifierbyrotatingthegain control knob towards the max position until better reception is achieved. Tip • It is possible to turn the gain control knob down for best reception. For UHF reception 1 Turn the TV to the desired channel. 2 Turn on the amplifier by rotating the gain control knob towards the max position until reception is improved. Tip • It is possible to turn the gain control knob down for best reception. Set up a digital tuner with this antenna You can install available channels with the digital TV tuner. This automatic process is par t of the setup of the tuner. Ensure the antenna has set up properly before the tuner can receive viewable channels. There are two ways to connect the antenna to the TV: • Connect the antenna to a digital tuner. If the signal streng th is good enough, the channels can be memorized in the tuner automatically . • Connect the antenna directly to the TV. Tune to the analogue channels and find the best antenna location. Then reconnect the antenna to the digital tuner. Ensure the signal strength is good enough before you install the channels with the tuner. 8 EN 5 Frequently asked questions Can this antenna work with Analog transmissions? Yes, this antenna can receive analog television broadcasts in the UHF and VHF bandwidths. Can this antenna receive digital or work with HD-ATSC broadcasts? Yes, this antenna is designed to receive digital ATSC and HDTV broadcasts in the UHF & VHF bandwidths. Can this antenna be powered by a DC power supply in a boat, RV or camper? Yes, there is a DC power socket on the rear of the antenna. Plug the conver ter/adaptor into the antenna and the power source. Where should I place the antenna in order to get the best reception possible? Choose a location near a window which gives the antenna a clear view of the transmitter. Tip • For best reception, turn the gain control down to a lower setting. How do I know how much gain (amplification) is required to receive a clear picture? Once you have the VHF dipoles ex tended to the longest length, turn on the amplifier. Turn the amplifier up to the max position and then reduce as needed. In some case, you need to turn the amplifier down to receive a clearer picture. Can I set up this antenna with a digital tuner? Yes, this antenna can be set up with a digital tuner (see the section on “Set up a digital tuner with this antenna”). 6 Warranty and service Warranty information can be found at: philips.com/welcome For technical suppor t, send us an email with the model number of the product and a detailed description of your problem to:accessor ysuppor t@philips.com English EN 9 7 Glossary A Amplifier A device, either a single stage or a large scale circuit with multiple stages for creating gai...