Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
. • To completely disconnect the power input, the main plug of the product shall be disconnected from the main AC outlet. • Where the main plug is used as the disconnect device, the disconnect device shall remain readily operable. • No naked flame sources, such as lighted candles, should be placed on the product. For outdoor use • If this is the first time you install an antenna, for your own safety as well as others, seek professional assistance. • Per form as many functions as possible on the ground. • Select your installation site carefully. Remember: electric power lines and phone lines look alike. For your safety, assume that all overhead lines may cause fatal injur y. • Ensure that the installation site is structurally capable to suppor t all loads (weight of the antenna, weight of ice, weight of snow and wind force). • Properly sealed against leaks at the installation site. • Do not install your antenna on a wet or windy day. • If the assembly star ts to drop, get away from it immediately. Remember: the antenna, mast, cable, and metal guy wires are all excellent conductors of electrical current. Even the slightest touch of any of these par ts to a power line can cause electrocution and death. • If any par t of the antenna system should come in contact with a power line, don’t touch it or tr y to remove it yourself. Call your local power company. They will remove it safely. • If an accident occurs with the power lines, call for qualified emergency help immediately. Notice for USA This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to par t 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a par ticular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to tr y to correct the interference by one or more of the following measures: • Relocate the receiving antenna. • Increase the separation between equipment and receiver. 4 EN • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/T V technician for help. All other devices shall bear the following statement in a conspicuous location on the device: This device complies with par t 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Notice for Canada Class B Clause This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Depar tment of Communications. This Class B digital apparatus complies with Canadian ICES-003. Recycling Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products. The correct disposal of your old product helps prevent potentially negative consequences on the environment and human health. The packaging of this product is intended to be recycled. Contact your local authorities for information about how to recycle the packaging. When this logo is attached to a product, it means a financial contribution has been paid to the associated national recover y and recycling system. © 2011 Koninklijke Philips Electronics N.V. All rights reser ved. Reproduction in whole or in par t is prohibited without the written consent of the copyright owner.Trademarks are the proper ty of Koninklijke Philips Electronics N.V. or their respective owners. 2 Your SDV8625T/27 Congratulations on your purchase and welcome to Philips! To fully benefit from the suppor t that Philips offers, register your product at com/welcome. English EN 5 6 h 25mm wood screws i 6m coax cable with connectors j Weather boot k Power injector l Plastic anchors m Washer n 40mm Hexagon screw What’s in your box a SDV8625T/27 antenna b Power supply 100-240V AC / 6V DC 500mA c Wall/Mast bracket d Nut e U-Bolts f Mast clamps g Nuts with lock washers 2 11 1 3 4 5 6 7 8 9 10 14 12 13 1x 1x 1x 1x 2x 2x 4x 4x 1x 1x 1x 4x 1x EN 3 Get started Installation Installation information This antenna uses a power inser ter module to power the antenna amplifier. It is essential for proper operation of this antenna system that the power inser ter...