Оценок - 0, средний балл: 0 ( )

Производитель: Philips Размер: 950.72 kb Название файла: Язык инструкции:

Update using OAD (On the Air software Download) 1 If using (DVB-T) digital broadcast, your TV automatically receives software updates. If you receive a message on your screen asking you to update your software: English EN 21 • Select [Update now] to update the software immediately. • Select [Remind me later] to exit the update screen at that time and be reminded later. • Select [Cancel] to skip the update. 2 If you select [Cancel], you can manually access the OAD update by selecting [Setup] > [Software update] > [Local updates] > [OAD]. 3 Select the available version of OAD and press OK. 4 Follow the on-screen instructions to star t the update. Note • The T V restar ts af ter the sof tware update is complete. Change TV preferences 1 Press MENU. 2 Press to select [Setup] > [Installation] > [Preferences]. 3 Press OK or to enter [Preferences]. • [Location]Optimises T V settings for your location - home or shop. • [Volume bar]Displays the volume bar when adjusting the volume. • [Channel info.]Displays information about the T V channel ever y time you switch channels. Select [Full] to view channel information or [Off ] to turn off the channel information. • [EasyLink]Enables one-touch play and one-touch standby between EasyLink-compliant devices. • [E-sticker]For shop mode only. Sets the location of the e-sticker. Access decoder channel You can map channels provided through a decoder or descrambler to your TV channel selection. In this way, you can select these channels by using the RC of your TV.The decoder or a descrambler must be connected to EXT1 (SCART). Set decoder channel Map channels from a decoder or descrambler 1 Press MENU. 2 Press to select [Setup] > [Installation] > [Preferences] > [Decoder]. 3 Press OK or to enter [Decoder] menu . 4 Press to select [Channel] and press OK or to enter. » A list of analogue channels appears on the screen. 5 Press to select one channel to map to the decoder/descrambler channel and press OK to confirm. 6 Select [Status] and press OK or to enter. 7 Press to select [EXT 1] (SCART) the connector used by the decoder/ descrambler. 8 Press OK. 9 Press MENU to exit. Start a TV demo 1 Press DEMO on the remote control. 2 Press to select a demo and press OK to view it. 3 Press DEMO to exit. 22 EN English Reset the TV to factory settings You can restore the default picture and sound settings of your TV. Channel installation settings remain the same. 1 Press MENU. 2 Press to select [Setup] > 3[Installation] > [Factory settings]. Press OK or to enter the [Factory settings] menu. » A factor y setting message appears. 45 Select [Reset] to star t resetting. Press MENU to exit. EN 23 6 Install channels The first time you set up your TV, you are prompted to select a menu language and to install TV and digital radio channels (if available). This chapter provides instructions on how to re-install and fine tune channels. Automatically install channels This section describes how to search and store channels automatically. Step 1 Select your menu language 1 Press MENU. 2 Press to select [Setup] > [Installation] > [Language] > [Menu language]. 3 Press OK or to enter [Menu language]. Picture Sound Installation Software update Language Channel install. Preferences Factory settings Menu language Primary audio language Secondary audio language - - - - - - - - Hearing impaired Menu language English 4 Press to select a language setting. 5 Press OK to confirm. 6 Press to return to [Installation] menu. Step 2 Select your country Select your countr y for proper channel installation. 1 Press MENU. 2 Press to select [Setup] > [Installation] > [Channel install.] > [Channel assistant]. Language Channel install. Menu language Picture Channel assistant Sound Preferences Location Decoder Channel Features Clock Auto clock Factory settings Action Installation Software update 3 Press OK or to enter the menu. » The countr y menu appears. Select your country, then press OK Slovakia Slovenia Spain Sweden Switzerland Turkey Ukraine UK 4 Press to select your countr y. 5 Press OK to confirm your choice. » The channel installation guide appears on the screen. Step 3 Install channels Install the available analogue and digital TV channels and digital radio channels automatically. 1 From the channel installation guide screen (see ‘Step 2 Select your countr y’ on page 24), select [Full installation] to automatically install all TV channels and digital radio channels. Start automatic installation. This takes a few minutes. Full installation Skip installation 2 Press OK to confirm. » The TV star ts to search and store all the available channels. 24 EN System searching. Please wait. Stop Digital channels found Analogue channels found 7 0 3 When installation is complete, press OK to return to [Installation] menu. Step 4 Update the channel list You can choose to enable auto update of channels, if your TV is in standby mode. If you enable this feature, the channels stored in your TV will be updated ever y morning according to th...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: