Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации Philips, модель 32PFL4007H/12

Производитель: Philips
Размер: 1.95 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Maximise video display Some subtitles create a separate subtitle bar under the video, which limits the video display area. To maximise the video display area, you can switch on auto subtitle shift. The subtitles are then displayed over the video image. Switch on auto subtitle shift 1. Press . 2. Select [Setup] > [TV settings] > [EasyLink] > [Auto subtitle shift]. 3. Select [On], then press OK to activate. Note: Make sure that the picture format of the TV is set to [Auto format] or [Movie expand 16:9]. Listen to another device while TV is in standby You can listen to a connected HDMI-CEC compliant device through the TV speakers, even while the TV is in standby. 1. Press ADJUST to receive audio from the connected Philips EasyLink device. If available, audio only mode is switched on. 2. Accept the prompt on the TV to turn off the TV screen. 3. Control the audio playback with the TV remote control. View Scenea What you can do With Scenea, you can display a picture as the wallpaper on your TV. Display the default picture or load your own picture as the wallpaper. The wallpaper is displayed for 240 minutes or for the duration of the sleeptimer. Switch on 1. Press . 2. Select [Scenea], then press OK. The default picture is displayed. Note: The wallpaper is displayed for 240 minutes or for the duration of the sleeptimer. For information about the sleeptimer, see Use more of your TV > Set locks and timers > Sleeptimer (Page 28). Load TV wallpaper You can also load your own picture from a connected USB storage device or a connected PC as the wallpaper. Note: When you load a new picture, it overrides the existing picture. 1. Connect the USB storage device to the TV or connect to the network. 2. Press . 3. Select [Browse USB] or [Your network], then press OK. 4. Select a picture, then press OPTIONS. 5. Select [Set as Scenea], then press OK. 6. Select [Yes], then press OK. 7. Press any button to exit Scenea. 4 Set up your TV Picture and sound Settings assistant You can select picture and sound settings with the help of the settings assistant, which demonstrates the effect of your chosen setting immediately. 1. While you watch TV, press . 2. Select [Setup] > [Quick picture and sound settings], then press OK. 3. Select [Start], then press OK. 4. Follow the onscreen instructions to choose your preferred settings. More picture settings You can change the settings in the Picture menu. 1. Press . 2. Select [Setup] > [TV settings] > [Picture], then press OK. 3. Select a setting to adjust, then press OK. Note: Options marked with a * are available for certain models only. • [Smart picture]: Access predefined smart picture settings. • [Reset]: Reset to default factory settings. • [Backlight contrast]: Adjust the contrast of the TV backlight. • [Brightness]: Adjust the intensity and details of the dark areas. • [Colour]: Adjust the level of colour saturation. • [Hue]: Compensate colour variations in NTSC transmissions. • [Sharpness]: Adjust sharpness in the image. • [Noise reduction]: Filter and reduce noise in the image. • [Tint]: Adjust the colour balance in the image. • [Custom tint]: Customise tint setting. • [Pixel Plus HD] / [Pixel Precise HD]*: Control advanced settings to fine-tune each pixel to match surrounding pixels. This setting produces a brilliant, highdefinition image. - [HD Natural Motion]*: Reduce motion judder and reproduce smooth motion. - [Clear LCD]*: Enable superior motion sharpness, better black level, high contrast with a flicker-free, quiet image and a larger viewing angle. - [Super resolution]: Enable superior sharpness, especially on lines and contours in the picture. - [Dynamic contrast]: Set the level at which the TV automatically enhances details in the dark, middle and light areas of the picture. - [Dynamic backlight]: Reduce power consumption by dimming the TV backlight to match room lighting conditions. - [MPEG artefact reduction]: Smooth the digital transitions in the picture. - [Colour enhancement]: Set the colours to be more vivid and improve the resolution of details in bright colours. - [Gamma]: Non-linear setting for picture luminance and contrast. - [Video contrast]: Change the intensity of the bright areas, keeping dark areas unchanged. • [PC mode]: Allow picture settings to be changed when a PC is connected to the TV through HDMI. If enabled, you can select [Picture format] > [Unscaled] which provides maximum detail for display of PC content. • [Light sensor]: Adjust settings dynamically to match lighting conditions. • [Picture format]: Change the picture format. • [Screen edges]: Change the picture size. • [Picture shift]: Move the position of the picture. You cannot select this setting if the selected picture format is [Auto fill], [Auto zoom] or [Wide screen]. More sound settings You can change the settings in the Sound menu. 1. Press . 2. Select [Setup] > [TV settings] > [Sound], then press OK. 3. Select a setting to adjust: • [Smart sound]: Access predefined smart sound settings. • ...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории