Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
P E R S O N A L V O I C E M U S I C T H E A T R E O F F O N O F F .... HELPFUL HINT To adjust other items repeat steps 4 and 5. 28 USING PC PIP (PICTURE IN PICTURE) FEATURE USING PC PIP (PICTURE IN PICTURE) FEATURE P P IP (Picture-in-Picture) feature allows you to call up a subscreen when you are using your TV as a monitor. Note: Make sure you are in PC mode. 1 1 Press the MENU button to see the onscreen menu. 2 2 Press CURSOR DOWN button to highlight the FEATURES menu. 3 3 Press the CURSOR RIGHT button to enter the FEATURES menu. 4 4 Press the CURSOR RIGHT button to enter the PIP menu. 5 5 Press the CURSOR DOWN buttons to highlight the item that you would like to adjust. SIZE: Turn off and set the size of PIP. You can choose your preferred size of small, large, or PBP (Picture Beside Picture). Video: Select video source of PIP from TV, AV, S-Video or Component. Audio: Select audio source of PIP or PC. Display: Select which corner of the position of PIP. M A I N C O N T R O L S P I C T U R E A U D I O F E A T U R E S I N S T A L L P I P F E A T U R E S P I P S I Z E V I D E O A U D I O D I S P L A Y 1 ........ HELPFUL HINT PIP windows with component video source can only support up to 480i /576i (SD) video signal. 29 SETTING UP THE PC MODE (PERSONAL COMPUTER MONITOR) SETTING UP THE PC MODE (PERSONAL COMPUTER MONITOR) 15PF5120 (15” LCD TV ) No Resolution Mode V. Frequency (Hz) H. Frequency (kHz) 1 640 x 480 VGA VESA 60 59.940 31.469 2 80 0 x 60 0 SVGA VESA 56 56.250 35.156 3 SVGA VESA 60 60.317 37.897 4 1024 x 768 XGA VESA 60 60.0 04 48.363 20PF5120 (20” LCD T V ) No Resolution Mode V. Frequency (Hz) H. Frequency (kHz) 1 640 x 480 VGA VESA 60 59.940 31.469 2 800 x 600 SVGA VESA 56 56.250 35.156 3 SVGA VESA 60 60.317 37.897 30 TROUBLE SHOOTING TIPS TROUBLE SHOOTING TIPS No Power • Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert the plug into the outlet and push the POWER button again. • Check that the outlet is not on a wall switch. • Be sure the fuse is not blown on the AC power strip, if one is being used. No Picture • Check antenna/cable connections. Are they properly secured to the TV’s ANT75. plug? • Check the TUNER MODE control for the correct tuner setting. • Try running the Auto Program feature to find all available channels. • Press the AV button on the remote to make sure the correct signal source is selected. • If using an accessory device, be sure that it is functioning properly. • If in PC Mode, a video signal MUST BE present or the TV will turn off. No Sound • Check the VOLUME buttons. • Check the MUTE button on the remote control. • If you’re attempting to hook up auxiliary equipment, check the audio jack connections. No AV Signal • Check whether AV and S-Video sockets connected simultaneously. If they are, disconnect the S-Video socket. AV signal automatically overrides the S-Video signal if both sockets are connected simultaneously. S-VHS Color Becomes Faint • Unplug socket for S-Video connection. Reconnect the S-Video socket of the TV carefully to the VCR socket. TV Only Produces MONO Sound • If using a cable box with RF only type connections, the signal coming from the cable box will be produced in MONO only. • Check Sound control setting. Change setting to Stereo. Remote Does Not Work • Check the batteries. Place lithium cell in the remote. Be sure the (+) and (-) ends of the batteries line up as marked inside the battery compartment. • Clean the remote control and the remote control sensor window on the TV. • Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert the plug into the outlet and push the POWER button again. • Be sure the fuse is not blown on the AC power strip, if one is being used. • Check to be sure the TV outlet is not on a wall switch. • Be sure that the remote is in the correct operating mode. • Be sure the remote is pointed at the Remote Sensor Window on the TV. See page 3 of the Quick Use Guide for details. TV Displays Wrong Channel or No Channels Above 13 • Repeat channel selection. • Add the desired channel numbers (using the CHANNEL EDIT control) into the TV’s memory. • Check to be sure the TUNER MODES are set to the CABLE option and run the Auto Program feature to find all available channels. 31 CARE AND CLEANING CARE AND CLEANING WARNING concerning stationary images on the TV Screen: Do not leave fixed images on the screen for extended periods of time. This can cause uneven aging of the LCD panel. Normal use of the TV should involve viewing of programs that have constantly moving or changing images. Do not leave still images on screen for extended periods of time. Do not display the same images too frequently; if you do, subtle “ghost” images can be left on the LCD screen. Sources of stationary images may be Laser discs, video games, Compact Discs Interactive (CD-i), or paused Digital Video Discs (DVDs) or video tapes. Here are some common examples of stationary images: • DVD menus list DVD content. • Letterbox black bars app...
Эта инструкция также подходит к моделям:Телевизоры - 15PF5120/01 (2.02 mb)