Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
5 Re-enter the same code in the new dialogue box for confi rmation. E If the code is set successfully, the dialogue box will disappear. However, if the code cannot be set, a new dialogue box will prompt you to re-enter the code. 6 If you want to change the code, select [Features] > [Change code]. 7 Enter your current code using the Numeric buttons. E If the code is validated, a new dialogue box will prompt you to enter your new code. 8 Enter the new code using the Numeric buttons. E A message appears prompting you to enter the new code again for confi rmation. Tip • If you forget your code, enter ‘8888’ to override any existing codes. English EN 15 Lock or unlock all channels and 3 Press or Numeric buttons to connected devices enter time. 1 Press MENU. 2 Press to select [Features] > [TV lock]. 3 Press to enter the [TV lock]. E A screen appears prompting you to enter a code. 4 Enter your code using Numeric buttons. 5 Press to select [Lock] or [Unlock]. 6 Press OK. E All channels and connected devices are locked or unlocked. 7 Press MENU to exit. Note • If you select [Lock], you have to enter your code ever y time you turn on your T V. Lock or unlock one or more channels 1 When watching T V, press OK to display the channel grid. 2 Press to select a channel to lock or unlock. 3 Press OPTIONS. 4 Press to select [Lock/Unlock chan.]. 5 For each selection, press OK to lock or unlock the channel. Use the TV clock You can display a clock on the TV screen. Set the TV clock 1 Press MENU. 2 Select [Features] > [Clock] E The [Clock] menu appears. 4 Press [Done] to confi rm. 5 Press MENU to exit. Change TV preferences 1 Press MENU. 2 Select [Installation] > [Preferences] . 3 Press to enter [Preferences]. • [Location]Optimises TV settings for your location - home or shop. • [Volume bar]Displays the volume bar when adjusting the volume. • [EasyLink]Enables one-touch play and one-touch standby between EasyLink-compliant devices. • [Colour] Sets the colour television standard used in your area. • [E-sticker]For shop mode only. Sets the location of the e-sticker. 4 Press to select your preference. 5 Press OK. 6 Press MENU to exit. Access decoder channel You can map channels provided through a decoder or descrambler to your TV channel selection. In this way, you can select these channels by using the RC of your TV. The decoder or a descrambler must be connected to EXT1 or EXT2. Set decoder channel Map channels from a decoder or descrambler 1 Press MENU. 2 Select [Installation] > [Decoder] . 3 Press to enter [Decoder]. 4 Press to enter [Channel]. 16 EN 5 Press to select channel number to map to the decoder/descrambler channel. 6 Press OK. 7 Press to select and enter [Status]. 8 Press to select the connector used by the decoder/descrambler ( [None], [EXT 1] or [EXT 2] . 9 Press OK. 10 Press MENU to exit. Note • Select [None] if you do not want to map to the decoder/descrambler channel. • [EXT 2] is available only in TVs of 26 inches and larger. Start a TV demo 1 Press MENU. 2 Select [Features] > [Demo] . E The [Demo] menu appears. 3 Press to select a demo. • [Dig.CrystalClear]Displays two pictures side by side on the screen - a normal picture and a picture enhanced by this feature. • [Active Control]Automatically adjusts the picture setting for optimal picture quality continuously under any signal conditions. 4 Press OK to star t the demo. 5 Press MENU to exit. Reset the TV to factory settings You can restore the default picture and sound settings of your TV. Channel installation settings remain the same. 1 Press MENU. 23 Select [Installation] > [Factory settings] . Press to enter the [Factory settings] menu. E [Reset] is highlighted. 45 Press OK to reset to factor y settings. Press MENU to exit. English EN 17 6 Install channels The first time you setup your TV, you are prompted to select a menu language and to install TV and digital radio channels (if available). This chapter provides instructions on how to reinstall and fine tune channels. Automatically install channels This section describes how to search and store channels automatically. Step 1 Select your menu language Note • Skip this step if your language set tings are correct. 1 Press MENU. 2 Select [Installation] > [Menu language] . 3 Press to enter [Menu language]. 4 Press to select a language setting. Picture Sound Menu language Channel install. Preferences Decoder Current software БългарскиEnglish CeskyFactory settings DanskDeutschEspanolFrancaisInstallation ........ Features 5 Press OK to confi rm. 6 Press MENU to exit. Step 2 Install Channels Select yo...
Эта инструкция также подходит к моделям:Телевизоры - 42PFL3604/12 (2.74 mb)
Телевизоры - 42PFL3604/60 (2.74 mb)
Телевизоры - 32PFL3404/60 (2.74 mb)
Телевизоры - 22PFL3404/60 (2.74 mb)