Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Digital TV service operators provide the CAM when you subscribe to their services. Contact a digital TV service operator for more information and to see terms & conditions. Insert a CAM Switch off the TV before inserting a CAM. Look on the CAM for the correct method of insertion. Incorrect insertion can damage the CAM and the TV. Look for the common interface slot on the back of the TV. Gently insert the CAM as far as it will go and leave it in the slot permanently. It can take a few minutes before the CAM is activated. Removing the CAM will deactivate the service on TV. Watching a CAM service If a CAM is inserted and subscription fees have been paid, the TV shows the programme from the digital TV service provider. The applications, their function, the content and the onscreen messages all come from the CAM service. CAM settings To set passwords or PIN codes for the CAM service, press h > Setup > Channel settings > Common Interface. Select the CAM provider and press OK. CI+ This TV can handle the CI+ conditional access. CI+ allows service providers to offer premium HD digital programmes like movies and sports with a high level of copy protection. To insert a CI+ CAM, read chapter CAM -Conditional Access Module. Connections / Common interface CAM 6 Troubleshooting 6.1 Contact information If the advice and suggestions in Troubleshooting do not help resolve the problem, try switching the TV off and back on again. Warning If your TV breaks down, NEVER try to repair the TV yourself. Consumer Care If the TV problem is not solved you can call the Consumer Care hotline in your country. Look up the TV model and serial number before you call. Find the telephone number on the documentation that came with the TV. Or consult our website TV model number and serial number Find these numbers on the packaging label or on the type label on the back or bottom of the TV. Troubleshooting / Contact information 6.2 TV and remote control The TV does not switch on • Switch the TV off and on again with the switch on the bottom of the TV. • Check the power cable connection. • Try using the keys on the TV to switch on. The TV does not switch on from standby • Check that the batteries of the remote control are not empty or weak. Check their + / -orientation. • Try using the keys on the TV to switch on. The TV does not respond to the remote control • Check that the batteries of the remote control are not empty or weak. Check their + / -orientation. • Clean the remote control and TV sensor lens. • During start-up, which can take up to two minutes with connected devices, the TV and some external devices do not immediately respond to commands from the remote control. The device is functioning normally and is not broken. The TV switches off and the red light flashes • Switch the TV off and on again with the switch at the bottom of the TV. Check if there is enough space for ventilation. Wait until the TV has cooled down. If the TV does not restart from standby and the light flashes again, call Consumer Care. You forgot your code to unlock Child lock ? Read Help > Smart TV > Locks and timers > Child lock . Troubleshooting / TV and remote control 6.3 TV channels Some TV channels are gone • Check if the correct list is selected in the Channel list. Press ¬ FIND to open the Channel list, then press r OPTIONS and select the list you need with Select list . • A channel could be hidden in the Channel list. Read more about Channel list in Help > Basics > Watch TV > Channel list . No digital channel found during installation • Check if the TV supports DVB-T or DVB-C in your country. Check the 'Digital TV Country Compatibility' sticker on the back of the TV. Troubleshooting / TV channels 6.4 Picture and sound No picture • Check if the antenna is connected properly. • Check if the correct device is selected and connected properly. • Check the contrast or brightness setting in h > Setup > TV settings > Picture > Contrast or Brightness. The picture is poor • Bad weather can influence the picture quality. • Check if the antenna is connected properly. • Non -earthed audio devices, neon lights, high buildings or mountains can influence the picture quality. Try to improve the picture by changing the position of the antenna or placing devices away from the TV. • Check that the correct TV system is chosen in the Manual installation menu. • If only a certain channel is poor, try to fine tune this channel with the Fine tune menu. Read Help > Setup > Channels > Manual installation -Analogue. The picture has poor colour • Check the colour settings in h > Setup > TV settings. Or press r OPTIONS to select a Smart picture setting. Picture delay when a game console is connected • To prevent picture delay, press r OPTIONS, select Smart picture > Game. The TV does not remember my settings when I switch it back on • Check whether the TV is set to the Home location. Press h > Setup > TV settings > Preferences > Location. The picture does not fit th...