Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Follow the instructions on the screen. Note If the TV has already been installed before and/ or you want to change the First time installation settings, proceed with Use of the 'TV menu settings', p. 15. 1 COMMON INTERFACE75HDMI 1 HDMI 2 AUDIO INDIGITALAUDIO OUTLRAUDIO OUT(DIGITAL) INTERFACECOMMON INTERFACE 1 1 2 1 Step 1: select your on-screen language After the Welcome screen you are asked to select a language of the TV's on-screen menus. The text of the header and the info on screen continuously change language. Also the digital audio and subtitle language will be set to the selected menu language. Press the o or oe key to highlight your language. Press the OK key on the remote control. Follow the instructions on the screen to proceed. Step 2: complete the initial TV installation procedure Press the green colour key on your remote control when Television is highlighted. Select the country where you are now located. Notes • if you select a wrong country, the channel numbering will not be according to the standard for your country. • in case the country selected is not DVB-T supported by your TV, digital related menu- items will not be accessible. Press the green colour key on your remote control to start the Automatic channel installation. Notes All available digital TV and radio channels and analogue TV channels are searched for and stored automatically. This will take a few minutes. When the search is complete, the menu will indicate the number of digital and analogue channels found. 1 3 2 3 PHILIPS Installation This will help you to install the following sections: Television Settings assistant Menu language English Espanol Francais Hrvatski Italiano Magyar ............. Please select your language..... PHILIPS using cursor up and down Skip Next Previous Stop PHILIPS Television System searching: please wait.......... Digital channels found 16 Analogue channels found 22 Next Stop 1 2 Notes - reception of digital terrestrial TV channels is applicable dependent on the country selected; - if you choose to install the channels at a later time, select the Automatic installation in the TV menu, Installation, Channels to scan available channels. Press the red colour key again when the search is completed. Step 3: Settings assistant: select your TV settings By means of several split screens/full screens you are prompted to select your preferred picture and sound to finally arrive at a complete setting which satisfies you. Press the green colour key on your remote control to enter the Settings assistant menu. Select your Location with the o or oekey. If you choose Shop it will skip the Settings assistant. The TV parameters for Picture and Sound will then be set to predefined fixed settings. Press the green colour key again to proceed. Notes If you choose Home it will display the Settings assistant. Use the p or . key to each time select your preferred screen. Press the green colour key to confirm your selection each time and to jump to the next screen. The items will be presented sequentially. In the header it is mentioned how many screens have been completed and how many screens there are in total. The Settings assistant will step sequentially through the following settings: Picture and Sound. Press the green colour key again to store all the settings and to return to the TV installation menu. Note When you skip or stop the Settings Assistant, then the standard settings Philips selected for you will be chosen. Press the red colour key again to finish the First time installation procedure and to display the first stored TV channel. Note Any time you can change or reset your settings or adjust individual settings for Picture and Sound in the 'TV settings' menu. See p. 15, 'Use of the TV menu settings'. To control the settings of special TV functions, features and accessory equipment, see p. 21, 'Adjust feature menu settings'. PHILIPS Settings assistant Please select your location before continuing: Home Shop 4 4 1 5 2 3 6 PHILIPS Installation This will help you to complete the Settings assistant. Television Settings assistant Previous Stop Skip Next 4.6 How to navigate through the menus Introduction A lot of guiding instructions, help texts and messages will be display on your TV when you use the menus or when you try to execute an action. • Read the help texts which are being displayed on the specific item highlighted. • The colour keys at the bottom of the screen refer to the different actions which may be executed. Press the corresponding colour key on the remote control to perform the required or desired action. Note Digital related menu items will only be accessible in case of digital TV broadcasting. Press the key on the remote control. The main menu appears on the screen. • TV menu allows you to access the TV menu. See below. • TV channels allows you to access the TV channel list and to create up to four favourite lists with your preferred TV channels and digital radio stations. See Create your favourite ch...
Эта инструкция также подходит к моделям:Телевизоры - 32PFL7572D/10 (1.52 mb)
Телевизоры - 42PFL7562D/10 (1.52 mb)
Телевизоры - 37PFL7562D/10 (1.52 mb)
Телевизоры - 42PFL7572D/10 (1.52 mb)