Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
You can replace the ear pads, the ear cushions, and the nose pad as shown below. Removing ear pads, replacing ear cushions Pull the ear pad toward the edge, away from the headphone. Be careful not to pull too forcefully, which may tear the ear pad. Slit Ear cushion Remove the ear cushion. Adhesive backing Peel the new ear cushions away from the adhesive backing. When attaching them, align the slit with the ear cushion’s opening. After replacing the ear cushions, reattach the ear pads. Replacing the nose pad Pull off the nose pad to remove it. To attach a new nose pad, push the nose pad clip into the opening. GB Confirming Screen Alignment Confirm screen alignment by referring to the confirmation screen displayed initially after lens span adjustment. Screens on the head mounted unit are described below, with an explanation of how to confirm alignment. The display section of the head mounted unit consists of two small screens, on the left and right. Images on each screen overlap to form a single image. Always check screen alignment by referring to the confirmation screen before use to make sure the screens are aligned properly. Left image Right image Image perceived with both eyes GB Correct Display Correct Display e horizontal line intersect. It is acceptable if the “I” marks and the horizontal line intersect in a position other than the centre of the screen. Incorrect Display If even one of the “I” marks and the horizontal line do not intersect, the head mounted unit may have been bent out of shape, or it may be damaged. If this condition occurs, contact your nearest Sony dealer or local authorised Sony service centre. The middle “I” mark does not intersect the horizontal line. “I” marks and the horizontal line The horizontal line appears to do not intersect. be extremely slanted. GB System Settings Setting menus can be accessed at any time to change or adjust a variety of system settings, such as video picture quality, audio output format, and 3D display format. To view the menus, press the MENU button on the head mounted unit. Basic Menu Operations 1 Press the MENU button on the head mounted unit. 2 Press the v/V button to select the desired setting category icon, and then press the MENU button. 3 Press the v/V button to select the desired menu, and then press the MENU button. 4 Press the v/V/b/B buttons to change or adjust settings as needed, and then press the MENU button to enter your changes. A Setting category icons B Category C Setting menu D Current settings in each menu E Summary of the selected menu Note • After 90 seconds of inactivity, the setting menu will automatically close. Tips • To return to the previous menu, press the b button. • To exit the setting menu, press the b button in the setting category icon menu. GB Menus Menus Information Identifies input signals (video and audio signals) from the equipment connected to the processor unit. “Unsupported signal” indicates that the input signal is incompatible with the system, and “No signal” is shown when no signals are input. Lens span adjustment Back Returns to the previous menu. Lens span adjustment Adjusts the lens span of the head mounted unit to match the distance between your eyes (interpupillary distance), for an optimal viewing experience. Use the lens span adjusters on the head mounted unit for adjustment. For details, refer to the “Startup Guide.” • Without the lens span adjusted correctly, you cannot enjoy an optimal viewing experience. Always adjust the lens span before use. • Audio is muted during adjustment. • The volume cannot be changed during adjustment. Notes 3D Settings Back Returns to the previous menu. Reset Resets all “3D Settings” items to the original default values. GB 3D Display 3D Display Auto 3D On: Automatically switches to 3D display mode when a 3D format identification signal is detected. If the 3D format identification signal is no longer detected, the system will automatically switch to 2D display mode. Off: Deactivates this function. • If images do not appear in 3D when “Auto 3D” is set to “On,” try changing the “3D Display” setting. Note 3D Signal Notification On: Notifies you when a 3D format identification signal is detected. Off: Deactivates this function. Display Back Returns to the previous menu. Picture Mode Vivid: Vivid colours and sharp contrast, for concerts, sports, and other televised content. Standard: Emphasises a natural picture. Standard picture quality for a variety of video sources. Cinema: Picture quality designed especially for cinematic content. Custom: Stores your customised preferred picture quality, adjusting from original flat picture. GB Reset Reset Picture Adjusts image contrast. Brightness Adjusts the brightness of the image. Color Temperature Adjusts image colour temperature. Cool: Cool blue colour tones. Neutral: Colour tones between “Cool” and “Warm 1/Warm 2.” Warm 1/Warm 2: Warm red colour tones. “Warm 2” is redder than “Warm 1.” Sharpness Enhances image edges to make images s...