Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Your TV is now ready for use. First Time Operation - Basic Presetting Advanced Operation - Advanced Presetting Automatically Tuning the TV Besides the explanation in the section “Automatically Tuning the TV using the Remote Control“, by following the instructions below, this TV also searches and stores automatically all available channels using just one button of the TV set and one button of the remote control. SRM887PROGRMENU1 4 7 2 5 8 0 3 6 9 K 1 Press the flap on the front of the TV by pressing on the mark to reveal the front control panel. 2 Press and hold in the button on the TV set for some seconds, until a menu appears automatically on the screen asking you to check that antenna is connected. Please confirm that antenna is connected CONFIRM Please confirm that antenna is connected CONFIRM 3 Confirm that the antenna is connected and then press the OK button on the remote control. The automatic tuning starts and the message "Searching..." flashes on the screen. This procedure could take some minutes. Please confirm that antenna is connected CONFIRM AUTO PROGRAMME PROGRAMME: SYSTEM: CHANNEL: 01 B/G C 21 Searching... When the automatic tuning procedure is complete, the menu disappears from the TV screen and your TV is now ready for use. Note: To stop the automatic tuning, press the MENU button on the remote control. Advanced Operation - Advanced Presetting Advanced Operation - Advanced Presetting Manually Tuning the TV Use this function to preset channels or a video input source one by one to the programme order of your choice. SRM887PROGRMENU1 4 7 2 5 8 0 3 6 9 K 1 Press the MENU button on the remote control to display the menu on the TV screen. 2 Press the button to select the symbol, then press the button to enter to the SET UP menu. 3 Press the button to select MANUAL PROGRAMME, then press the button. 4 With the cursor highlighting PROGRAMME, press the button and then, press the or button to select on which programme number you want to preset a channel. Press the button. 5 Press the button to select CHANNEL, then press the button. Press or button to select the channel tuning, "C" for terrestrial channels or "S" for cable channels. Press the button. 6 Press the number buttons to enter the channel number of the TV Broadcast or press the or button to search for the next available channel. If you do not wish to store this channel, press the or button to continue searching for the desired channel. 7 If this is the desired channel you wish to store, press the OK button and then, with the cursor highlighting CONFIRM, press the OK button again. PICTURE CONTROL CONTRAST BRIGHTNESS COLOUR SHARPNESS HUE RESET MODE: PERSONAL 0 SET UP PICTURE ROTATION: LANGUAGE: ENGLISH AUTO PROGRAMME PROGRAMME SORTING MANUAL PROGRAMME 0 SET UP PICTURE ROTATION: LANGUAGE: ENGLISH AUTO PROGRAMME PROGRAMME SORTING MANUAL PROGRAMME 01 B/G C 21 ON NO OFF SET UP: MANUAL PROGRAMME CONFIRM PROGRAMME: SYSTEM: CHANNEL: AFT: SKIP: DECODER: SET UP: MANUAL PROGRAMME CONFIRM PROGRAMME: SYSTEM: CHANNEL: AFT: SKIP: DECODER: 01 B/GC 21 ON NO OFF 01 B/G C 21 ON NO OFF SET UP: MANUAL PROGRAMME CONFIRM PROGRAMME: SYSTEM: CHANNEL: AFT: SKIP: DECODER: PICTURE CONTROL CONTRAST BRIGHTNESS COLOUR SHARPNESS HUE RESET MODE: PERSONAL 01 B/GC 21 ON NO OFF SET UP: MANUAL PROGRAMME CONFIRM PROGRAMME: SYSTEM: CHANNEL: AFT: SKIP: DECODER: 8 Repeat steps 4 to 7 if you wish to store more channels. 9 Press the MENU button to exit and return to the normal TV screen. Your TV is now ready for use. Advanced Operation - Advanced Presetting Advanced Operation - Advanced Presetting Fine Tuning Channels Normally, the automatic fine tuning (AFT) function is operating. If the picture is distorted, however, you can manually fine tune the TV to obtain a better picture reception. SRM887PROGRMENU1 4 7 2 5 8 0 3 6 9 K 1 Select the channel (TV Broadcast) you wish to fine tune, then press the MENU button on the remote control to display the menu on the TV screen. 2 Press the button to select the symbol, then press the button to enter to the SET UP menu. 3 Press the button to select MANUAL PROGRAMME, then press the button. 4 Press the button to select AFT, then press the button. 5 Press the or button to adjust the fine tuning (-15 to +15), then press the OK button. 6 With the cursor highlighting CONFIRM, press the OK button to store. 0 SET UP PICTURE ROTATION: LANGUAGE: ENGLISH AUTO PROGRAMME PROGRAMME SORTING MANUAL PROGRAMME 0 SET UP PICTURE ROTATION: LANGUAGE: ENGLISH AUTO PROGRAMME PROGRAMME SORTING MANUAL PROGRAMME SET UP: MANUAL PROGRAMME CONFIRM PROGRAMME: SYSTEM: CHANNEL: AFT: SKIP: DECODER: 01 B/GC 21 +2 NO OFF 01 B/GC 21 +2 NO OFF SET UP: MANUAL PROGRAMME CONFIRM PROGRAMME: SYSTEM: CHANNEL: AFT: SKIP: DECODER: 01 B/GC 21 ON NO OFF SET UP: MANUAL PROGRAMME CONFIRM PROGRAMME: SYSTEM: CHANNEL: AFT: SKIP: DECODER: PICTURE CONTROL CONTRAST BRIGHTNESS COLOUR SHARPNESS HUE RESET MODE: PERSONAL PICTURE CONTROL CONTRAST BRIGHTNESS COLOUR SHARPNESS HUE RESET MODE: PERSONAL 7 Press...