Оценок - , средний балл:
(
)
)
Производитель: Sony
Размер: 1.49 mb
Название файла:
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
Фрагмент инструкции
If you do not take the following precautions, you may get hurt or household belongings may be damaged. • Clean the air filter periodically. If you don’t clean it, it may cause internal heat build-up. • Never use an air filter which is torn or has holes. Attach the filter firmly with six tabs. If dust enters the TV, the picture may become dark or it may cause fire. 1 Turn off the power and disconnect the power cord. 2 Remove the front panel. Remove the front panel without moving the TV. Grasping the sides of the front panel with your fingers, pull the panel forward. Be careful not to catch your fingernails. 3 Pull the filter upward and remove it. 4 Clean the dust with a vacuum cleaner. vacuum cleaner 5 Attach the filter. Attach the six tabs securely. 6 Attach the front panel. Be careful not to damage the speaker. Notes • Attach the filter firmly. If it is not firmly attached, the power will not turn on. • Consult your nearest Sony service centre to obtain a new filter. Supplied filter Replacing the Lamp When the lamp becomes dark or the picture colour is not normal, replace the lamp with a new one. If you do not take the following precautions, you may get hurt or household belongings may be damaged. • Use the supplied new lamp for replacement. If you use another lamp, it may cause damage to the TV. • Do not remove the lamp except when replacing it. This may cause heat damage or fire. • Before replacing the lamp, turn off the power and disconnect the power cord. • Replace the lamp after it becomes cool. The front glass of the lamp remains 100 °C (212 °F) and more even 30 minutes after the power is turned off. • Do not place the removed lamp in proximity to children or flammable material. • Do not get the removed lamp wet, or insert objects inside the lamp. It may cause the lamp to explode. • Do not place near metal or easily flammable objects, as this may cause fire. Also, do not put your hand inside the lamp compartment, as you may be burned. • Attach the new lamp firmly. If it is not firmly attached, the picture may become dark or fire may result. 1 Turn off the power and disconnect the power cord. Replace the lamp 30 minutes or more after the power is turned off. Prepare the new lamp. 2 Remove the front panel. Remove the front panel without moving the TV. Grasping the side of the front panel with your fingers, pull the panel forward. Be careful not to catch your fingernails. 3 Loosen the screw with the object such as a coin and remove the lamp cover. 4 Loosen the screw and pull out the lamp. The lamp is still very hot just after the power is turned off. Be careful not to touch the front glass or surrounding area of the lamp or the glass of the lamp compartment. Loosen the screw with the supplied wrench. Pull out the lamp by the handle. 5 Attach the new lamp. Fasten the screw tightly. 6 Attach the lamp cover. Fasten the screw tightly. 7 Attach the front panel. Be careful not to damage the speaker. When the indicator on the front panel flashes The lamp is damaged, replace it with a new one. Notes • Do not touch or stain the front glass of the new lamp or the glass of the lamp compartment. If the glass becomes dirty, the picture quality may deteriorate or the lamp life may be shortened. • Attach the lamp cover firmly. If it is not firmly attached, the power will not turn on. • When the lamp burns out, a noise is audible. This does not represent a damage. • Consult your nearest Sony service centre to obtain a new lamp. GB 29 Troubleshooting Here are some simple solutions to some problems which may affect the picture and sound. Problem Solution No picture (screen is dark), no sound • Plug in the TV in. • Press uon the TV (if uindicator is on, press ;or a programme number on the Remote Commander). • Check the aerial connection. • Check if the selected video source is on. Poor or no picture (screen is dark), but sound is OK • Press to enter the PICTURE CONTROL menu and adjust the brightness, contrast and colour. Poor picture quality when watching an RGB video source • Press Erepeatedly to select . Good picture but no sound • Press .+. • Check loudspeakers connection. • If ois displayed on the screen, press o. No colour for colour programmes • Press to enter the PICTURE CONTROL menu, select Reset, then press the joystick to confirm. Remote Commander does not function • The batteries are weak. If you continue to have problems, have your TV serviced by qualified personnel. Never open the casing yourself. Specifications This product complies with the EU Directive 89/336/EEC. Television system B/G/H, D/K, I, L Colour system PAL/SECAM NTSC 3.58/4.43 (VIDEO IN) Channel coverage See “Receivable channels and channel displays” at the bottom. Projected picture size 40 inches Approx. 101.6 cm measured diagonally Terminals Rear Center speaker input terminals, 2 terminals (L, R), audio outputs - phono jacks 1, 21-pin Euro connector (CENELEC standard) -inputs for audio and video signals -inputs for RGB -outputs of TV audio and ...
Эта инструкция также подходит к моделям:- ()