Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Keep optional components at least 30 cm away from the unit. If a VCR is installed in front of the unit or beside the unit, the picture may become distorted. GB 17 Safety Information Precautions Precautions concerning ventilation Leave space around the unit. Otherwise, adequate air-circulation may be blocked causing overheating, which may cause fire or damage to the unit. When installing the unit on the wall 10 cm Leave at least this much space. When installing the unit using a stand 30 cm 10 cm 10 cm 30 cm 10 cm 10 cm Leave at least this much space. Never install the unit as follows: Air circulation is blocked. Air circulation is blocked. Wall Wall Precautions Viewing the TV comfortably • To view the TV comfortably, the recommended viewing position is from four to seven times the screen’s vertical length away from the TV. • View the TV in moderate light, as viewing the TV in poor light taxes your eyes. Watching the screen continuously for long periods of time can also tax your eyes. Installing the unit Use the specified wall-mount bracket or stand. • Do not install the unit in places subject to extreme temperature, for example in direct sunlight, or near a radiator, or heating vent. If the unit is exposed to extreme temperature, the unit may heat up and this may cause deformation of the casing or cause the unit to malfunction. • To obtain a clear picture, do not expose the screen to direct illumination or direct sunlight. If possible, use spot lighting directed down from the ceiling. • The unit is not disconnected from the mains when the unit is switched off. To disconnect the unit completely, pull the plug from the mains. Volume adjustment • Adjust the volume so as not to trouble your neighbours. Sound carries very easily at night time. Therefore, closing the windows or using headphones is suggested. • When using headphones, adjust the volume so as to avoid excessive levels, as hearing damage may result. Handling the remote control • Handle the remote control with care. Do not drop or step on it, or spill liquid of any kind onto it. • Do not place the remote control in a location near a heat source, or in a place subject to direct sunlight, or in a damp room. Handling and cleaning the screen surface of the unit To avoid screen degradation, follow the advice given below. Do not push on the screen or scratch it with hard objects, or throw anything at it. The screen may be damaged. • Be sure to unplug the mains lead before cleaning the unit. • Do not touch the display panel after operating the unit continuously for a long period as the display panel becomes hot. • We recommend that the screen surface be touched as little as possible. • Clean the screen with a soft cloth. • Never use any type of abrasive pad, scouring powder, or solvent, such as alcohol or benzine. Using such materials may result in damage to the screen surface. Cleaning the cabinet • Be sure to unplug the mains lead before cleaning the cabinet. • Clean the cabinet with a soft cloth. • Note that material deterioration or screen coating degradation may occur if the unit is exposed to a volatile solvent, such as alcohol, thinner, benzine or insecticide, or if prolonged contact is maintained with rubber or vinyl materials. • The ventilation holes can accumulate dust over a period of time. To ensure proper ventilation, we recommend removing the dust periodically (once a month) using a vacuum cleaner. GB 19 Precautions Overview Checking the Accessories Supplied Remote Control Size AA Batteries Rear Cover (1): RM-Y1103 (1): (R6 Type) (2): Coaxial Cable (1): Mains Lead (Type C-6) (1): Do not remove ferrite cores. Use this mains lead if you use the unit outside the United Kingdom. Mains Lead (Type BF) (1): • Use this mains lead if you use the unit in the United Kingdom. • Refer to “NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM” on page 2 when using this mains lead. Overview Overview of the TV Buttons and Indicators Remote control sensor (“Memory Stick”) indicator / (Standby/Sleep) indicator & (Power) indicator & (Power) switch P (Channel) +/– buttons 2 (Volume) +/– buttons “Memory Stick” slot (Input Select) button (“Memory Stick”) access lamp GB Status of the indicators (“Memory Stick”) indicator and (“Memory Stick”) access lamp lights up or flashes in red The “Memory Stick” is being accessed. & (Power) indicator lights up in green The power of the TV is on. / (Standby/Sleep) indicator lights up in red The TV is in the standby mode. The Sleep Timer function is on when the TV is turned on. / (Standby/Sleep) indicator flashes in red The TV is receiving remote control signals. / (Standby/Sleep) indicator flashes in red repeatedly and the & (Power) indicator is off There is a problem with the TV. For more details, refer to “Self-diagnosis function” on page 68. For the connectors on the rear panel of the TV, refer to “Connecting Optional Equipment” on page 61. 21 Overview Overview of the Remote Control Buttons a Switching the TV to the standby mode: Press thi...
Эта инструкция также подходит к моделям:Телевизоры - KLV-26HG2 (7.09 mb)