|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Tip You can also change the picture mode by pressing repeatedly. Contrast/Brightness/Colour/Hue/Sharpness/Backlight 1 Press OK to select the option. 2 Press , to set the level, then press OK. Tip “Hue” can only be adjusted for an NTSC colour signal (e.g., U.S.A. video tapes). Reset Resets all the picture settings to the factory settings. 1 Press OK to select “Reset”. 2 Press M/m to select “OK”, then press OK. Noise Reduction Reduces the picture noise (snowy picture) in a weak broadcast signal. 1 Press OK to select “Noise Reduction”. 2 Press M/m to select one of the following, then press OK. Auto: Automatically reduces the picture noise. Off: Modifies the effect of the noise reduction. Using the Menu Continued 21 GB Colour Tone 1 Press OK to select “Colour Tone”. 2 Press M/m to select one of the following, then press OK. Warm: Gives the white colours a red tint. Normal: Gives the white colours a neutral tint. Cool: Gives the white colours a blue tint. 22 GB “Sound Adjustment” menu Sound Adjustment Sound Effect Treble Bass Balance Reset Dual Sound Auto Volume Natural 0 0 0 Stereo Off Select: Set: OK End: MENUBack: You can select the options listed below on the “Sound Adjustment” menu. To select options, see “Navigating through menus” (page 19). Sound Effect 1 Press OK to select “Sound Effect”. 2 Press M/m to select one of the following sound effects, then press OK. Natural: Enhances clarity, detail, and sound presence by using “BBE High Definition Sound System*1”. Dynamic: Intensifies clarity and sound presence for better intelligibility and musical realism by using the “BBE High Definition Sound System”. Off: Flat response. Tip You can also change sound effect by pressing 9 repeatedly. *1 Licensed by BBE Sound, Inc. under USP4638258, 4482866. “BBE” and BBE symbol are trademarks of BBE Sound, Inc. Treble/Bass/Balance Reset Adjusts higher-pitched sounds (“Treble”), adjusts lower-pitched sounds (“Bass”), and emphasizes left or right speaker balance (“Balance”). 1 Press OK to select the option. 2 Press , to set the level, then press OK. Resets the “Treble”, “Bass” and “Balance” settings to the factory settings. 1 Press OK to select “Reset”. 2 Press M/m to select “OK”, then press OK. Using the Menu Continued 23 GB Dual Sound Auto Volume Selects the sound from the speaker for a stereo or bilingual broadcast. 1 Press OK to select “Dual Sound”. 2 Press M/m to select one of the following, then press OK. Stereo, Mono: For a stereo broadcast. A/B/Mono: For a bilingual broadcast, select “A” for sound channel 1, “B” for sound channel 2, or “Mono” for a mono channel, if available. Tip If you select other equipment connected to the TV, set “Dual Sound” to “Stereo”, “A” or “B”. Keeps a constant volume level even when volume level gaps occur (e.g., adverts tend to be louder than programmes). 1 Press OK to select “Auto Volume”. 2 Press M/m to select “On”, then press OK. 24 GB “Features” menu Features Power Saving TV Speakers RGB Center Standard On 0 Select: Set: OK End: MENUBack: You can select the options listed below on the “Features” menu. To select options, see “Navigating through menus” (page 19). Power Saving TV Speakers Reduces the power consumption of the TV. 1 Press OK to select “Power Saving”. 2 Press M/m to select “Reduce”, then press OK. Switches on/off the TV’s internal speakers. 1 Press OK to select “TV Speakers”. 2 Press M/m to select “On” or “Off”, then press OK. On: The sound of the TV is output through the TV’s speakers. One Time Off: The TV speakers are temporarily turned off allowing you listen to the sound from external audio equipment. The “TV Speakers” option automatically returns to “On” when the TV is switched off. Permanent Off: The TV speakers are permanently turned off allowing you to always listen to the sound from external audio equipment. RGB Center Adjusts the horizontal picture position so that the picture is in the middle of screen. This option is only available if an RGB source has been connected to the Scart socket 1/ 1. 1 Press OK to select “RGB Center”. 2 Press , to adjust the centre of the picture between –5 and +5, then press OK. Using the Menu 25 GB “Set Up” menu Set Up Language Country Auto Tuning Programme Sorting Programme Labels AV Preset Manual Programme Preset English United Kingdom Select: Set: OK End: MENUBack: You can select the options listed below on the “Set Up” menu. To select options, see “Navigating through menus” (page 19). Language Country Selects the language in which the menus are displayed. 1 Press OK to select “Language”. 2 Press M/m to select the language, then press OK. All menus will appear in the selected language. Selects the country/region where you operate the TV. 1 Press OK to select “Country”. 2 Press M/m to select the country/region in which you will operate the TV, then press OK. If the country/region in which you want to use the TV does not appear in the list, select “–” instead of a country/region. Tunes in all the available channels. Usually you...