Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
no sound • Connect the TV to the mains, and press 1 on the TV (right side). • If the 1 (standby) indicator lights up in red, press TV "/1. No picture or no menu • Check that the optional equipment is on and press / repeatedly until information from equipment the correct input symbol is displayed on the screen. connected to the scart • Check the connection between the optional equipment and the TV. connector Distorted picture • Check if any connected optional equipment is installed in front of the TV or beside the TV. When installing optional equipment, leave some space between the optional equipment and the TV. • When changing programmes or selecting Text, turn off any equipment connected to the scart connector on the rear of the TV. Double images or ghosting • Check aerial/cable connections. • Check the aerial location and direction. Only snow and noise appear on the screen • Check if the aerial is broken or bent. • Check if the aerial has reached the end of its serviceable life (three to five years in normal use, one to two years at the seaside). Picture (dotted lines or stripes) noise • Keep the TV away from electrical noise sources such as cars, motorcycles, or hair-dryers. • Make sure that the aerial is connected using the supplied coaxial cable. • Keep the aerial cable away from other connecting cables. • Do not use a 300-ohm twin lead cable as interference may occur. Picture noise when viewing a TV channel • Select “Manual Programme Preset” in the “Set Up” menu and adjust “AFT” (Automatic Fine Tuning) to obtain better picture reception (page 32). • Select “Noise Reduction” in the “Picture Adjustment” menu to reduce the noise in the picture (page 22). Stripe noise during playback/ recording of a VCR • Video head interference. Keep your VCR away from the TV. • Leave a space of 30 cm between your VCR and the TV to avoid noise. • Avoid installing your VCR in front of the TV or beside the TV. Additional Information Continued 39 GB Problem Cause/Remedy Some tiny black points and/or • The picture of a display unit is composed of pixels. Tiny black points and/or bright points on the screen bright points (pixels) on the screen do not indicate a malfunction. No colour on programmes • Select “Reset” in the “Picture Adjustment” menu to return to the factory settings (page 22). No colour or irregular colour • Check the connection of the Y, PB/CB, PR/CR jacks of 4. when viewing a signal from the • Make sure that the Y, PB/CB, PR/CR jacks of 4 are firmly seated in their Y, PB/CB, PR/CR jacks of 4 respective sockets. Sound Problem Cause/Remedy No sound, but good picture • Press 2 +/– or % (Mute). • Check that “Speaker” is set to “On” in the “Features” menu (page 26). Noisy sound • See the “Picture noise” causes/remedies on page 39. Audio distortion • See “Audio Filter” on page 33. General Problem Cause/Remedy The TV turns off automatically (the TV enters standby mode) • Check if the Sleep Timer function is activated (page 28). • Check if the Auto Shutoff is activated (page 28). • If no signal is received or no operation is performed in the TV mode for 10 minutes, the TV automatically switches to standby mode. Some input sources cannot be selected • Select “AV Preset” in the “Set Up” menu and cancel “Skip” of the input source (page 31). The remote does not function • Check that the remote is set correctly for the equipment you are using. • If the remote does not operate the equipment even when the remote has been set correctly to the equipment, enter the necessary code set as explained in “Programming the remote” (page 36). • Replace the batteries. Wrong characters appear when viewing the menu/Text/ NexTView • Select “Language” and “Country” in the “Set Up” menu and set the language and country/region in which Text/NexTView is provided (page 29). For Cyrillic languages, we recommended that you select Russia if your own country/region does not appear in the list. 40 GB Index Numerics 0-9 buttons 8 14:9 18 4:3 18 A Accessories supplied 10 Aerial, connecting 11 AFT 32 Audio Filter 33 Auto Format 25 Auto Shutoff 28 Auto Start Up 29 Auto Tuning 15, 30 Auto Volume 23 AUX/VIDEO \/1 button 8 AV Preset 31 AV2 Output 26 B Backlight 21 Balance 23 Bass 23 Batteries, inserting into the remote 10 BBE 23 Brightness 21 C Channels auto-tuning 15 selecting 16 Skip 33 Colour 21 Colour Tone 21 Coloured buttons 8 Connecting an aerial/VCR 11 optional equipment 34 Contrast 21 Country 29 D Decoder 33 Dolby Virtual 23 Dual Sound 24 Dynamic Picture 22 E Edit 31 Effect (sound effect) 23 Equipment labels 31 F Fastext 17 Features menu 26 G Gamma Correction 22 H Headphones connecting 34 Dual Sound 24 Volume 24 Hue 21 I Info ( ) button 8 Input select ( ) button 8, 9 Input signal index table 18 L Label 32 Language 29 M Manual Programme Preset 31 Media selector 8 MENU button 8, 9 Mode (Picture mode) 21 Mute (%) button 8 N NexTView 17 Noise Reduction 22 Number buttons 8 O OK button 8, 9 P Picture Adjustment menu 21 Picture mode ( ) button 8 Picture O...
Эта инструкция также подходит к моделям:Телевизоры - KLV-V40A10E (4.4 mb)