Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
• To see a list of the connected HDMI control compatible equipment, select “HDMI Device Selection”. 6 Settings Displays the “Settings” menu where most of the advanced settings and adjustments are performed. 1 Press F/f to select a menu icon, then press . 2 Press F/f/G/g to select an option or adjust a setting, then press . For details about settings, see page 23 to 38. ~ The options you can adjust vary depending on the situation. Unavailable options are greyed out or not displayed. * This function may not be available in some countries/ regions. 22 GB Picture menu You can select the options listed below on the “Picture” menu. To select options in “Settings”, refer to “Navigating through menus” (page 22). Target Inputs Selects whether to apply settings made in the “Picture” menu to all inputs, or only to the input currently being watched. “All”: Applies settings to all inputs. “Viewing Only”: Applies settings only to the current input. Picture Mode Selects the picture mode except for PC input source. The options for “Picture Mode” may differ depending on the “Video/Photo” setting (page 28). “Vivid”: For enhanced picture contrast and sharpness. “Standard”: For standard picture. Recommended for home entertainment. “Cinema”: For viewing film-based content. Most suitable for viewing in a theatre- like environment. This picture setting was developed in collaboration with Sony Pictures Entertainment to faithfully reproduce movies as intended by their creators. “Photo”: Sets the optimum picture quality for photographs. Display Mode Selects the display mode for PC input source. “Video”: For video images. “Text”: For text, charts or tables. Reset Resets all the “Picture” settings except “Target Inputs”, “Picture Mode” and “Display Mode” to the factory settings. Backlight Adjusts the brightness of the backlight. Contrast Increases or decreases picture contrast. Brightness Brightens or darkens the picture. Colour Increases or decreases colour intensity. Hue Increases or decreases the green tones and red tones. ~ “Hue” can only be adjusted for an NTSC colour signal (e.g. U.S.A. video tapes). Continued 23 GB Using MENU Functions Colour Temperature Adjusts the whiteness of the picture. “Cool”: Gives the white colours a blue tint. “Neutral”: Gives the white colours a neutral tint. “Warm 1”/“Warm 2”: Gives the white colours a red tint. “Warm 2” gives a redder tint than “Warm 1”. z “Warm 1” and “Warm 2” are not available when “Picture Mode” is set to “Vivid”. Sharpness Sharpens or softens the picture. Noise Reduction Reduces the picture noise (snowy picture) in a weak broadcast signal. “Auto”: Automatically reduces the picture noise (in analogue mode only). “High”/“Medium”/“Low”: Modifies the effect of the noise reduction. “Off”: Turns off the “Noise Reduction” feature. MPEG Noise Reduction Reduces the picture noise in MPEG-compressed video. Advanced Settings Customizes the Picture function in more detail. When you set “Picture Mode” to “Cinema”, “Photo” or “Standard”, you can set/change these settings. “Reset”: Resets all the advanced settings to the factory settings. “Black Corrector”: Enhances black areas of the picture for stronger contrast. “Adv. Contrast Enhancer”: Automatically adjusts “Backlight” and “Contrast” to the most suitable settings judging from the brightness of the screen. This setting is especially effective for dark images scenes. It will increase the contrast distinction of the darker picture scenes. “Gamma”: Adjusts the balance between bright and dark areas of the picture. “Clear White”: Emphasizes white colours. “Live Colour”: Makes colours more vivid. “Colour Space”: Changes the colour reproduction gamut. “Wide” reproduces the vivid colour and “Standard” reproduces the standard colour. 24 GB Sound menu You can select the options listed below on the “Sound” menu. To select options in “Settings”, refer to “Navigating through menus” (page 22). Target Inputs Selects whether to apply settings made in the “Sound” menu to all inputs, or only to the input currently being watched. “All”: Applies settings to all inputs. “Viewing Only”: Applies settings only to the current input. Sound Mode “Dynamic”: Enhances treble and bass. “Standard”: For standard sound. Recommended for home entertainment. “Custom”: Flat response. Also allows you to store your preferred settings. Reset Resets all the “Sound” settings except “Target Inputs”, “Sound Mode”, “Dual Sound”, “i Speaker Link” and “i Dual Sound” to the factory settings. Treble Adjusts higher-pitched sounds. Bass Adjusts lower-pitched sounds. Balance Emphasizes left or right speaker balance. Auto Volume Keeps a constant volume level even when volume level gaps occur (e.g. adverts tend to be louder than programmes). Volume Offset Adjusts the volume level of the current input relative to other inputs, when “Target Inputs” is set to “Viewing Only”. Surround “S-FORCE Front Surround”: Available for normal stereo broadcast and 5.1ch digital broadcast surround audio, and the...