Войти:
Оценок - 2, средний балл: 3 ( )

Инструкция по эксплуатации Samsung, модель PS43F4505AW

Производитель: Samsung
Размер: 1.37 mb
Название файла:
Язык инструкции:
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


English . . . . Auto Volume To equalize the volume level on each channel, set to Normal. Night: This mode provides an improved sound experience compared to Normal mode, making almost no noise. It is useful at night. N N To use the volume control on the source device connected to the TV, set Auto Volume to Off on the TV. Otherwise, a change to the volume control of the source device may not be applied. English . . ¦ ¦ Additional Settings O O MENUm > Sound > Additional Settings > ENTERE . . DTV Audio Level (digital channels only): This function allows you to reduce the disparity of a voice signal (which is one of the signals received during a digital TV broadcast) to a desired level. N N According to the type of broadcast signal, MPEG / HE-AAC can be adjusted between -10dB and 0dB. N N To increase or decrease the volume, adjust between the range 0 and -10 respectively. English . . . . Digital Audio Out: Digital Audio out is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player. Audio Format: You can select the Digital Audio output format. The available Digital Audio output format may differ depending on the input source. N N By connecting to 5.1ch speakers in a Dolby Digital setup, maximize your interactive 3D sound experience. Audio Delay: Correct audio-video sync problems, when watching TV or video, and when listening to digital audio output using an external device such as an AV receiver (0ms ~ 250ms). English . . . . Dolby Digital Comp: This function minimizes signal disparity between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound). N N Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night time. Line: Set the output level for signals greater or less than -31dB (reference) to either -20dB or -31dB. RF: Set the output level for signals greater or less than -20dB (reference) to either -10dB or -20dB. ¦ ¦ Reset Sound O O MENUm > Sound > Reset Sound > ENTERE Reset all sound settings to the factory defaults. English . . . . Selecting the Sound Mode t When you set to Dual I-II, the current sound mode is displayed on the screen. Audio Type Dual I-II Default A2 Stereo Mono Mono Automatic change Stereo Stereo - Mono Dual Dual I - Dual II Dual I NICAM Stereo Mono Mono Automatic change Stereo Mono - Stereo Dual Mono > Dual I . Dual II . Dual I N N If the stereo signal is weak and an automatic switching, occurs, then switch to the mono. N N Only activated in stereo sound signal. N N Only available when the Source is set to TV. English . . . . Executing initial setup ¦ ¦ Setup O O MENUm > System > Setup > ENTERE Configure the channels and the time when setting up the TV for the first time or when resetting the unit. N N Execute the initial setup following instructions that the TV guides. English . . . . Setting the Time ¦ ¦ Time O O MENUm > Sys...

Эта инструкция также подходит к моделям:
Телевизоры - PS51F4905AK (1.37 mb)
Телевизоры - PS51F4900AW (1.37 mb)
Телевизоры - PS51F4900AK (1.37 mb)
Телевизоры - PS51F4500AW (1.37 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории