Оценок - 1, средний балл: 3
(
)
)
|
Фрагмент инструкции
. Coaxial cable is the cable that comes in from your antenna, cable TV service, or cable converter box. Coaxial cable uses “F” connectors. . Standard A/V (audio/video) cables usually come in sets of three, and are typically color-coded according to use: yellow for video, red for stereo right audio, and white for stereo left (or mono) audio. On your TV’s back panel, the standard A/V inputs are color-coded in the same manner as the cables. . S-Video cable is for use with video equipment with S-Video output. . Component video cables come in sets of three (color-coded red, green and blue), and are for use with video equipment with component video outputs. ColorStream® is Toshiba’s brand of component video. . DVI-D digital single-link cable is for use with video equipment with DVI-D output (see page 13). NOTE REGARDING PICTURE QUALITY When connecting video equipment to your Toshiba TV: . For GOOD picture quality: Use a standard yellow video cable. . For BETTER picture quality: If your equipment has an S-video input, use an S-video cable instead of a standard yellow video cable. (You still must connect the standard red and white audio cables for full system connection, but do not connect the standard yellow video cable at the same time, or the picture performance will be unacceptable.) . For BEST picture quality: If your equipment has component video (or DVI) inputs, use either component video cables (or a DVI cable) instead of a standard video or S-video cable. (You still must connect the standard red and white audio cables for full system connection, but do not connect the standard yellow video cable or an S-Video cable at the same time.) Connecting a VCR This connection allows you to watch local channels and video programs, play or record on the VCR while watching TV, and record from one channel while watching another channel. You will need: • two coaxial cables • one set of standard A/V cables From Cable Box or Antenna IN from ANT VIDEO AUDIO OUT to TV CH 3 L R CH 4 IN OUT OUTIN ANT( 75 ) ANT-1 ANT-2OUT L/ MONO AUDIO VIDEO S-VIDEO VIDEO 1 PB PR Y COLOR STREAM HD-1 COLOR STREAM HD-2 R VIDEO S-VIDEO VIDEO 2 L/ MONO AUDIO VIDEO R L VAR AUDIO R AUDIO R L PB PR Y AUDIO R L L/ MONO AUDIO R ON OFF AUDIO CENTER CHANNEL IN DVI/HDCP IN R AUDIO L Stereo VCR TV Component video cables (red, green, blue) Coaxial (antenna) cable Standard A/V cables (red/white/yellow) S-video cable DVI-D digital single-link cable CAUTION: Do not plug in any power cords until you have finished connecting all equipment. Note: If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable. If you have a VCR with S-video, use an S-video cable (plus audio cables) instead of the standard video cable for better picture performance. Do not connect a standard video cable and an S-video cable to VIDEO 1 (or VIDEO 2) at the same time or the picture performance will be unacceptable. The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. Index AppendixUsing the TV’sSetting upUsing theConnectingIntroductionFeatures your TV Remote Control your TV 7 Setting upUsing theConnectingIntroductionyour TV Remote Control your TV Connecting a cable box This connection allows you to watch basic and premium cable channels. To watch basic cable and use the TV’s features, select ANT-1. To view premium channels, select ANT-2, tune the TV to channel 3 or 4 (whichever channel is vacant in your area), and use the cable box to change channels. You will need: • three coaxial cables OUTIN ANT( 75 ) ANT-1 ANT-2 L/ MONO AUDIO VIDEO S-VIDEO VIDEO 1 PB PR Y COLOR STREAM HD-1 COLOR STREAM HD-2 R VIDEO S-VIDEO VIDEO 2 L/ MONO AUDIO VIDEO R L VAR AUDIO R AUDIO R L PB PR Y AUDIO R L L/ MONO AUDIO R ON OFF AUDIO CENTER CHANNEL IN DVI/HDCP IN R AUDIO L INOUT Cable box TV From Cable Connecting a cable box and VCR This connection allows you to watch and record basic and premium cable channels, watch videotapes, and record one channel while watching another channel. To watch basic cable and use the TV’s features, select ANT-1. To view premium channels or record with the VCR, select ANT-2, tune the TV to channel 3 or 4 (whichever channel is vacant in your area), and use the cable box to change channels. You will need: • four coaxial cables • one set of standard A/V cables From Cable Note: When you use a cable box with your TV, the remote control will not operate some features, such as programming your favorite channels, labeling channels, and locking channels. Note: If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable. If you have a VCR with S-video, use an S-video cable (plus audio cables) instead of a standard video cable. Do not connect a standard video cable and an S-video cable to VIDEO 1 (or VIDEO 2) at the same time or the picture performa...
Эта инструкция также подходит к моделям:Телевизоры - 34HFX83 (4.15 mb)