Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
Note: • The ASPECT is also available when viewing HDMI input source of 480i or other format. • The ASPECT operates according to aspect information indicated in the digital signal of HDMI. Selecting the display format (for 480p signals only) This feature converts an input signal 480p to 540p or 1080i. To select the display format: 1. Press MENU, and then press or until the PICTURE menu appears. 2. Press ^ or Ў to highlight DISPLAY FORMAT. 3. Press or to select 540p or 1080i. Using the TV’sFeatures Notes: • The DISPLAY FORMAT feature is available only for 480p input. 1080i is always output when a signal other than 480p is input. • If you notice flicking in a 480p image, try setting the DISPLAY FORMAT to 540p. 34 3R40121A/E P31-37 34 6/7/04, 18:58 Adjusting the picture preference You can select four picture modes—Sports, Standard, Movie, and Memory—as described in the following table: Mode Picture Quality SPORTS Bright and dynamic picture (factory-set) STANDARD Standard picture quality (factory-set) MOVIE Movie-like picture setting (factory-set) MEMORY Your personal preferences (set by you; see “Adjusting the picture quality”) Menu To adjust the picture quality: 1. Press MENU, then press or to display the PICTURE menu. 2. Press ^ or Ў to highlight MODE. Exit . . . . . . . . . . . . . . . . . . . 3. Press or to highlight the mode you prefer. 4. Press EXIT to return to normal viewing. Adjusting the picture quality You can adjust the picture quality to your personal preferences, including the brightness, contrast, color, tint, and sharpness. The qualities you choose will be stored automatically in your TV’s memory so you can recall them at any time. To adjust the picture quality: 1. Press MENU, then press or to display the PICTURE menu. 2. Press ^ or Ў until the item you want to adjust is highlighted. Menu . . . . . . . . . . . . . . . 3. Press or to adjust the level. Exit Selection Pressing BRIGHTNESS darker lighter CONTRAST lower higher COLOR paler deeper TINT reddish greenish SHARPNESS softer sharper 4. Press EXIT to return to normal viewing. 35 3R40121A/E P31-37 35 6/7/04, 18:58 AppendixSetting upyour TV Using theRemote ControlConnectingyour TV Welcome to Toshiba ImportantSafeguards Using the TV’s Features Selecting the color temperature Change the picture quality by selecting from three preset color temperatures— cool, medium, and warm—as described in the following table: Menu To select the color temperature: 1. Press MENU, then press or to display the PICTURE menu. 2. Press ^ or Ў to highlight COLOR TEMPERATURE. Mode Picture Quality COOL Blueish MEDIUM Neutral WARM Reddish . Exit . . . . . . . . 3. Press or to highlight the mode you prefer. 4. Press EXIT to return to normal viewing. Selecting the Scan Velocity Modulation (SVM) The SVM feature enhances picture contrast and sharpness. This feature has three modes: HIGH, LOW, and OFF. To select the SVM feature: 1...
Эта инструкция также подходит к моделям:Телевизоры - 26HF84 (2.71 mb)
Телевизоры - 26HF84A (2.71 mb)
Телевизоры - 26HF84 (2.71 mb)
Телевизоры - 26HF84A (2.71 mb)