Войти:
Оценок - 1, средний балл: 4 ( )

Инструкция по эксплуатации Toshiba, модель 27A33

Производитель: Toshiba
Размер: 2.05 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


• Remove dead batteries immediately to prevent battery acid from leaking into the battery compartment. • If you do not intend to use the remote control for a long time, remove the batteries. POWER Channel Numbers Sleep Channel +/– Menu/Enter CAP/TEXT Reset TV/Video Recall Mute Volume +/– Exit 1/2 MTS Channel Return Favorite Channels st AppendixUsing Features Setting upyour TV Connectingyour TV Welcome Toshiba ImportantSafeguards Using theRemote Control Setting up your TV After you have installed the batteries, you need to set some preferences on the TV using the menu system. You can access the menu system with the buttons on the remote control. • When you make a menu selection, your changes occur immediately. You do not have to press MENU or EXIT to see your changes. • After five seconds, the menu screen will automatically close if you do not make a selection. Your changes will still be saved. • When you are finished programming the menus, press EXIT. Changing the on-screen display language You can choose from three different languages (English, French and Spanish) for the on-screen displays. Adjustment menus and messages will appear in the language of your choice. To select a language: 1. Press MENU, then press or until the OPTION menu appears. CH LABEL START SELECT ADJUST START FAVORITE CH START DVDCOLORSTREAM ENGLISH V-CHIP START LOCK OFFON/OFF TIMER LANGUAGE Exit Menu 2. Press or to highlight LANGUAGE. PICTURE AUDIO SETUP CH OPTION 3. Press or to highlight your desired language. PICTURE AUDIO SETUP CH CH LABEL START SELECT ADJUST START START DVD ENGLISH FRANCAIS ESPANOL FAVORITE CH V-CHIP COLORSTREAM OFFON/OFF TIMER LANGUAGE START LOCK Setting upyour TV OPTION 12 Adding channels to the TV’s memory Your TV will stop on specific channels that are stored in the TV’s channel memory when you press Channel + or –. Use the steps below to set all active channels in your area automatically. Programming channels automatically Your TV can automatically detect all active channels and store them in its memory. After the TV has stored the channels in its memory automatically, you can add or erase channels manually. To add channels automatically: 1. Press MENU, then press or to display the SETUP menu. 2. Press or until the TV/ CABLE selection is highlighted. 3. Press or to highlight either TV or CABLE, depending on which you use. If you use an antenna, choose TV. If you use cable, choose CABLE. PICTURE AUDIO SETUP OPTION CH CH PROGRAM ADD / ERASE START ADD SELECT ADJUST TV / CABLE TV CABLE 4. Press to select CH PROGRAM. 5. Press or to start channel programming. The TV will automatically cycle through all the TV or Cable channels (depending on which you selected), and store all active channels in the channel memory. While the TV is cycling through the channels, the message “PROGRAMMING NOW-PLEASE WAIT” appears. 6. When channel programming is complete, the message “COMPLETED” appears. 7. Press CH + or – to view the programmed channels. Adding and erasing channels manually After you have programmed the channels automatically, you can add or erase specific channels manually. To add or erase channels manually: 1. Select the channel you want to add or erase. If adding channels, you must select the channel to add using the Channel Number buttons. 2. Press MENU, then press or to display the SETUP menu. PICTURE AUDIO SETUP OPTION CH CH PROGRAM START SELECT ADJUST TV / CABLE CABLE ADD / ERASE ADD ERASE 3. Press or to highlight ADD/ ERASE. 4. Press or to select ADD or ERASE, whichever function you want to perform. 5. Repeat steps 1-4 for other channels you want to add or erase. Changing channels To change to the next programmed channel: Press Channel s or t on the TV or CH + or – on the remote control. To change to a specific channel (programmed or unprogrammed): Press the Channel Number buttons (0-9 and 100) on the remote control. For example, to select channel 125, press 100, 2, 5. 13 Channel Numbers Channel +/– Exit Menu AppendixUsing Features Using theRemote ControlConnectingyour TV Welcome Toshiba ImportantSafeguards Setting upyour TV Using the TV’sFeatures Using the TV’sFeatures Using the TV’s features Adjusting the channel settings Switching between two channels You can switch between two channels without entering an actual channel number each time. To switch between two channels: 1. Select the first channel you want to view. 2. Select a second channel using the Channel Number buttons (0-9, 100). 3. Press CH RTN. The previous channel will be displayed. Each time you press CH RTN, the TV will switch back and forth between the two channels. Programming your favorite channels You can preset up to 12 of your favorite channels using the Favorite Channel Programming feature. Because this feature scans through only your favorite channels, it allows you to skip other channels you do not normally watch. You can still use Channel + / – to scan through all the channels you programmed in the TV’s memory. To program your favorite chan...

Эта инструкция также подходит к моделям:
Телевизоры - 27A33 (2.05 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории